SpecialOffer
You may also like:
CURRENT/VOLTAGE SENSOR
ACS 712 - 5 A Current Sensor Module
Description The ACS712, available at Tomson Electronics, Kochi, Kerala, provides an economical and precise solution for AC or DC current sensing in an industrial and...
Description The ACS712, available at Tomson Electronics, Kochi, Kerala, provides an economical a...
In Stock
₹ 399.00
₹ 302.00
Quick View
{"id":11931576211,"title":"ACS 712 - 5 A Current Sensor Module","handle":"5a-range-current-sensor-module-acs712","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe ACS712, available at Tomson Electronics, Kochi, Kerala, provides an economical and precise solution for AC or DC current sensing in an industrial and domestic system. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection. This product should not be used for automotive applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe output of the device has a positive slope when an increasing current flows through the primary copper conduction path (from pins 1 and 2 to pins 3 and 4), which is the path used for current sensing. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor IC leads (pins 5 through 8). This allows the ACS712 current sensor IC to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCopy this Arduino Code for Current Reading in mA,\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\/*\u003cbr\u003eMeasuring Current Using ACS712 - Arduino\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eBy, Tom. Tomson Electronics\u003cbr\u003e\u003cbr\u003eConnect the Signal from ACS 712 Module to A0 of the Arduino.\u003cbr\u003e\u003cbr\u003e*\/\u003cbr\u003econst int analogIn = A0;\u003cbr\u003eint mVperAmp = 185; \/\/ use 100 for 20A Module and 66 for 30A Module\u003cbr\u003eint RawValue= 0;\u003cbr\u003eint ACSoffset = 2500;\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003edouble Voltage = 0;\u003cbr\u003edouble Amps = 0;\u003cbr\u003e\u003cbr\u003evoid setup(){\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.begin(9600);\u003cbr\u003e}\u003cbr\u003e\u003cbr\u003evoid loop(){\u003cbr\u003e\u003cbr\u003eRawValue = analogRead(analogIn);\u003cbr\u003eVoltage = (RawValue \/ 1024.0) * 5000; \/\/ Gets you mV\u003cbr\u003eAmps = ((Voltage - ACSoffset) \/ mVperAmp);\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSerial.print(\"Raw Value = \" ); \/\/ shows pre-scaled value\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.print(RawValue);\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.print(\"\\t mV = \"); \/\/ shows the voltage measured\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.print(Voltage,3); \/\/ the '3' after voltage allows you to display 3 digits after decimal point\u003cbr\u003eSerial.print(\"\\t Amps = \"); \/\/ shows the voltage measured\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.println(Amps,3); \/\/ the '3' after voltage allows you to display 3 digits after decimal point\u003cbr\u003edelay(2500);\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e}\u003c\/p\u003e\n\u003ch5\u003eFeatures \u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The current sensor chips: ACS712ELC-30A;\\nPin 5V power supply, on-board power indicator;\\nThe module can measure the positive and negative 30 amps, corresponding to the analog output 100mV \/ A;\\nNo test current through the output voltage is VCC \/ 2;\\nPCB board size: 31 (mm) x13 (mm);\\nNote: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe current sensor chips: ACS712ELC-30A;\u003cbr\u003ePin 5V power supply, on-board power indicator;\u003cbr\u003eThe module can measure the positive and negative 30 amps, corresponding to the analog output 100mV \/ A;\u003cbr\u003eNo test current through the output voltage is VCC \/ 2;\u003cbr\u003ePCB board size: 31 (mm) x13 (mm);\u003cbr\u003eNote: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-01T13:37:49+05:30","created_at":"2017-08-01T13:41:13+05:30","vendor":"TOMSON ELECTRONICS","type":"CURRENT\/VOLTAGE SENSOR","tags":["Current Sensor","current\/voltage Sensor","ROBOTICS","SENSORS \u0026SENSOR MODULES","TOMSON ELECTRONICS"],"price":30200,"price_min":30200,"price_max":30200,"available":true,"price_varies":false,"compare_at_price":39900,"compare_at_price_min":39900,"compare_at_price_max":39900,"compare_at_price_varies":false,"variants":[{"id":47819604051,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SS-CRT-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ACS 712 - 5 A Current Sensor Module","public_title":null,"options":["Default Title"],"price":30200,"weight":50,"compare_at_price":39900,"inventory_quantity":36,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/CURRENT_SENSOR_04d36623-8765-40b2-bb5a-b14f7b89253e.png?v=1503386869"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/CURRENT_SENSOR_04d36623-8765-40b2-bb5a-b14f7b89253e.png?v=1503386869","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe ACS712, available at Tomson Electronics, Kochi, Kerala, provides an economical and precise solution for AC or DC current sensing in an industrial and domestic system. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection. This product should not be used for automotive applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe output of the device has a positive slope when an increasing current flows through the primary copper conduction path (from pins 1 and 2 to pins 3 and 4), which is the path used for current sensing. The internal resistance of this conductive path is 1.2 mΩ typical, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor IC leads (pins 5 through 8). This allows the ACS712 current sensor IC to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eCopy this Arduino Code for Current Reading in mA,\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\/*\u003cbr\u003eMeasuring Current Using ACS712 - Arduino\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eBy, Tom. Tomson Electronics\u003cbr\u003e\u003cbr\u003eConnect the Signal from ACS 712 Module to A0 of the Arduino.\u003cbr\u003e\u003cbr\u003e*\/\u003cbr\u003econst int analogIn = A0;\u003cbr\u003eint mVperAmp = 185; \/\/ use 100 for 20A Module and 66 for 30A Module\u003cbr\u003eint RawValue= 0;\u003cbr\u003eint ACSoffset = 2500;\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003edouble Voltage = 0;\u003cbr\u003edouble Amps = 0;\u003cbr\u003e\u003cbr\u003evoid setup(){\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.begin(9600);\u003cbr\u003e}\u003cbr\u003e\u003cbr\u003evoid loop(){\u003cbr\u003e\u003cbr\u003eRawValue = analogRead(analogIn);\u003cbr\u003eVoltage = (RawValue \/ 1024.0) * 5000; \/\/ Gets you mV\u003cbr\u003eAmps = ((Voltage - ACSoffset) \/ mVperAmp);\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSerial.print(\"Raw Value = \" ); \/\/ shows pre-scaled value\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.print(RawValue);\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.print(\"\\t mV = \"); \/\/ shows the voltage measured\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.print(Voltage,3); \/\/ the '3' after voltage allows you to display 3 digits after decimal point\u003cbr\u003eSerial.print(\"\\t Amps = \"); \/\/ shows the voltage measured\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eSerial.println(Amps,3); \/\/ the '3' after voltage allows you to display 3 digits after decimal point\u003cbr\u003edelay(2500);\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e}\u003c\/p\u003e\n\u003ch5\u003eFeatures \u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The current sensor chips: ACS712ELC-30A;\\nPin 5V power supply, on-board power indicator;\\nThe module can measure the positive and negative 30 amps, corresponding to the analog output 100mV \/ A;\\nNo test current through the output voltage is VCC \/ 2;\\nPCB board size: 31 (mm) x13 (mm);\\nNote: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe current sensor chips: ACS712ELC-30A;\u003cbr\u003ePin 5V power supply, on-board power indicator;\u003cbr\u003eThe module can measure the positive and negative 30 amps, corresponding to the analog output 100mV \/ A;\u003cbr\u003eNo test current through the output voltage is VCC \/ 2;\u003cbr\u003ePCB board size: 31 (mm) x13 (mm);\u003cbr\u003eNote: ACS712 is based on the principle of the Hall test, please use this field to avoid an impact!\u003c\/span\u003e\u003c\/p\u003e"}
You may also like:
GAS SENSOR
MQ 7 - Carbon Monoxide Sensor Module
Description The MQ-7 gas sensor has high sensitivity to Carbon Monoxide. The sensor could be used to detect different gases contains CO, it is with...
Description The MQ-7 gas sensor has high sensitivity to Carbon Monoxide. The sensor could be use...
In Stock
₹ 169.00
₹ 153.00
Quick View
{"id":12135102035,"title":"MQ 7 - Carbon Monoxide Sensor Module","handle":"mq-7-gas-sensor","description":"\u003ch5\u003e\u003cspan\u003eDescription \u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe MQ-7 gas sensor has high sensitivity to Carbon Monoxide. The sensor could be used to detect different gases contains CO, it is with low cost and suitable for different application.It is widely used in domestic CO gas leakage alarm, industrial CO gas alarm, and portable CO gas detector. It can be easily interfaced with Arduino or Raspberry Pi using a simple electronic circuit on a breadboard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCopy the following code to your Arduino IDE to test the MQ 5 Module\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\/*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTesting MQ-7 GAS sensor with serial monitor\u003cbr\u003eFor detecting Carbon Monoxide Gas\u003cbr\u003eDev: Tom, www.tomsonelectronics.com\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e*\/\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003econst int gasPin = A0; \/\/GAS sensor output pin to Arduino analog A0 pin\u003cbr\u003e\u003cbr\u003evoid setup()\u003cbr\u003e{\u003cbr\u003eSerial.begin(9600); \/\/Initialize serial port - 9600 bps\u003cbr\u003e}\u003cbr\u003e\u003cbr\u003evoid loop()\u003cbr\u003e{\u003cbr\u003eSerial.println(analogRead(gasPin));\u003cbr\u003edelay(1000); \/\/ Print value every 1 sec.\u003cbr\u003e}\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan\u003eType: Analog\u003cbr\u003eDetecting Type: Carbonic Oxide(CO)\u003cbr\u003eRated Voltage: DC 5V\u003cbr\u003eRated Current: 180mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-08-24T12:10:38+05:30","created_at":"2017-08-24T12:20:34+05:30","vendor":"TOMSON ELECTRONICS","type":"GAS SENSOR","tags":["Gas Sensor","ROBOTICS","Sensors \u0026 Sensor Modules","TOMSON ELECTRONICS"],"price":15300,"price_min":15300,"price_max":15300,"available":true,"price_varies":false,"compare_at_price":16900,"compare_at_price_min":16900,"compare_at_price_max":16900,"compare_at_price_varies":false,"variants":[{"id":50097657747,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SS-GS-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"MQ 7 - Carbon Monoxide Sensor Module","public_title":null,"options":["Default Title"],"price":15300,"weight":100,"compare_at_price":16900,"inventory_quantity":16,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/MQ-7.png?v=1503557438"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/MQ-7.png?v=1503557438","options":["Title"],"content":"\u003ch5\u003e\u003cspan\u003eDescription \u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe MQ-7 gas sensor has high sensitivity to Carbon Monoxide. The sensor could be used to detect different gases contains CO, it is with low cost and suitable for different application.It is widely used in domestic CO gas leakage alarm, industrial CO gas alarm, and portable CO gas detector. It can be easily interfaced with Arduino or Raspberry Pi using a simple electronic circuit on a breadboard.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCopy the following code to your Arduino IDE to test the MQ 5 Module\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\/*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eTesting MQ-7 GAS sensor with serial monitor\u003cbr\u003eFor detecting Carbon Monoxide Gas\u003cbr\u003eDev: Tom, www.tomsonelectronics.com\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e*\/\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003econst int gasPin = A0; \/\/GAS sensor output pin to Arduino analog A0 pin\u003cbr\u003e\u003cbr\u003evoid setup()\u003cbr\u003e{\u003cbr\u003eSerial.begin(9600); \/\/Initialize serial port - 9600 bps\u003cbr\u003e}\u003cbr\u003e\u003cbr\u003evoid loop()\u003cbr\u003e{\u003cbr\u003eSerial.println(analogRead(gasPin));\u003cbr\u003edelay(1000); \/\/ Print value every 1 sec.\u003cbr\u003e}\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan\u003eType: Analog\u003cbr\u003eDetecting Type: Carbonic Oxide(CO)\u003cbr\u003eRated Voltage: DC 5V\u003cbr\u003eRated Current: 180mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
You may also like:
OTHER SENSORS
Tilt Angle Sensor
Features Supports 5V/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil...
Features Supports 5V/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load ...
In Stock
₹ 249.00
₹ 90.00
Quick View
{"id":11931812755,"title":"Tilt Angle Sensor","handle":"adxl335-digital-acceleration-tilt-angle-sensor","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Features: Supports 5V\/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil (2.54mm) easy for the matrix board\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Features: Supports 5V\/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil (2.54mm) easy for the matrix board\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSupports 5V\/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil (2.54mm) easy for the matrix board\u003c\/span\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Features: Supports 5V\/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil (2.54mm) easy for the matrix board\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003c\/span\u003e\u003c\/h5\u003e","published_at":"2017-08-01T14:38:09+05:30","created_at":"2017-08-01T14:48:04+05:30","vendor":"TOMSON ELECTRONICS","type":"OTHER SENSORS","tags":["OTHER SENSORS","ROBOTICS","Sensors \u0026 Sensor Modules","Tilt sensor","TOMSON ELECTRONICS"],"price":9000,"price_min":9000,"price_max":9000,"available":true,"price_varies":false,"compare_at_price":24900,"compare_at_price_min":24900,"compare_at_price_max":24900,"compare_at_price_varies":false,"variants":[{"id":47825232979,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SS-DS-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Tilt Angle Sensor","public_title":null,"options":["Default Title"],"price":9000,"weight":150,"compare_at_price":24900,"inventory_quantity":30,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/TILT_SENSOR.png?v=1501579110"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/TILT_SENSOR.png?v=1501579110","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Features: Supports 5V\/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil (2.54mm) easy for the matrix board\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Features: Supports 5V\/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil (2.54mm) easy for the matrix board\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSupports 5V\/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil (2.54mm) easy for the matrix board\u003c\/span\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Features: Supports 5V\/3.3V input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, ideal for noisy power environment; Pin Standard: 100mil (2.54mm) easy for the matrix board\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003c\/span\u003e\u003c\/h5\u003e"}
You may also like:
DIRECTION SENSOR
Vibration Sensor Module Vibration switch
Description The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The...
Description The Vibration module based on the vibration sensor SW-420 and Comparator LM393 to de...
In Stock
₹ 199.00
₹ 99.00
Quick View
{"id":12095184083,"title":"Vibration Sensor Module Vibration switch","handle":"vibration-sensor-module-vibration-switch","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\\n\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\\n\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\\n\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\\n\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe use of the company's production of SW-420 normally closed type vibration sensors. compactor output signal clean wave well, driving ability, 15mA rated voltage and 3.3V-5V output: digital switching output (0 and 1) a bolt-hole for easy installation small Board PCB dimensions: 3.2cm x 1.4cm using wide LM393 voltage compactor\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-19T14:59:33+05:30","created_at":"2017-08-19T15:16:25+05:30","vendor":"TOMSON ELECTRONICS","type":"DIRECTION SENSOR","tags":["DIRECTION SENSOR","LIGHT\/IMAGING Sensor","ROBOTICS","Sensors \u0026 Sensor Modules","TOMSON ELECTRONICS"],"price":9900,"price_min":9900,"price_max":9900,"available":true,"price_varies":false,"compare_at_price":19900,"compare_at_price_min":19900,"compare_at_price_max":19900,"compare_at_price_varies":false,"variants":[{"id":49706842643,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSS-VS-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Vibration Sensor Module Vibration switch","public_title":null,"options":["Default Title"],"price":9900,"weight":75,"compare_at_price":19900,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/VIBRATION_SENSOR.png?v=1503136054"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/VIBRATION_SENSOR.png?v=1503136054","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\\n\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\\n\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\\n\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Vibration module based on the vibration sensor SW-420 and Comparator LM393 to detect if there is any vibration that beyond the threshold. The threshold can be adjusted by the on-board potentiometer. When this no vibration, this module output logic LOW the signal indicate LED light,And vice versa.\\n\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe use of the company's production of SW-420 normally closed type vibration sensors. compactor output signal clean wave well, driving ability, 15mA rated voltage and 3.3V-5V output: digital switching output (0 and 1) a bolt-hole for easy installation small Board PCB dimensions: 3.2cm x 1.4cm using wide LM393 voltage compactor\u003c\/span\u003e\u003c\/p\u003e"}
You may also like:
CURRENT/VOLTAGE SENSOR
Voltage Detection Sensor Module - Arduino ,Arm & Other Mcu
Description This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times●...
Description This module is based on resistive voltage divider design principles, It is capable o...
In Stock
₹ 90.00
₹ 75.00
Quick View
{"id":12095240787,"title":"Voltage Detection Sensor Module - Arduino ,Arm \u0026 Other Mcu","handle":"voltage-detection-sensor-module-arduino-arm-and-other-mcu","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times\\n● You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side\\n● If 3.3V is used, the input voltage must not exceed 16.5V\\n● Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0\\n● 00489 V (5V \/ 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445\\n● Input voltage range: DC0-25V● Voltage detection range: DC0.02445 V - 25V\\n● Voltage analog resolutions: 0.00489V\\n● DC Input: positive terminal connected to VCC, GND negative pole\\n● Output interface: \\\"+\\\" then 5 \/ 3.3V, \\\"-\\\" then GND, \\\"s\\\" then the AD pin\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times\\n● You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side\\n● If 3.3V is used, the input voltage must not exceed 16.5V\\n● Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0\\n● 00489 V (5V \/ 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445\\n● Input voltage range: DC0-25V● Voltage detection range: DC0.02445 V - 25V\\n● Voltage analog resolutions: 0.00489V\\n● DC Input: positive terminal connected to VCC, GND negative pole\\n● Output interface: \\\"+\\\" then 5 \/ 3.3V, \\\"-\\\" then GND, \\\"s\\\" then the AD pin\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThis module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times\u003cbr\u003e● You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side\u003cbr\u003e● If 3.3V is used, the input voltage must not exceed 16.5V\u003cbr\u003e● Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0\u003cbr\u003e● 00489 V (5V \/ 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445\u003cbr\u003e● Input voltage range: DC0-25V● Voltage detection range: DC0.02445 V - 25V\u003cbr\u003e● Voltage analog resolutions: 0.00489V\u003cbr\u003e● DC Input: positive terminal connected to VCC, GND negative pole\u003cbr\u003e● Output interface: \"+\" then 5 \/ 3.3V, \"-\" then GND, \"s\" then the AD pin\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-08-19T13:26:14+05:30","created_at":"2017-08-19T15:28:37+05:30","vendor":"TOMSON ELECTRONICS","type":"CURRENT\/VOLTAGE SENSOR","tags":["current\/voltage Sensor","ROBOTICS","Sensors \u0026 Sensor Modules","TOMSON ELECTRONICS"],"price":7500,"price_min":7500,"price_max":7500,"available":true,"price_varies":false,"compare_at_price":9000,"compare_at_price_min":9000,"compare_at_price_max":9000,"compare_at_price_varies":false,"variants":[{"id":49707341715,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RSS-VS-02","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Voltage Detection Sensor Module - Arduino ,Arm \u0026 Other Mcu","public_title":null,"options":["Default Title"],"price":7500,"weight":100,"compare_at_price":9000,"inventory_quantity":18,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/VOLTAGE_SENSOR.png?v=1503136777"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/VOLTAGE_SENSOR.png?v=1503136777","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times\\n● You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side\\n● If 3.3V is used, the input voltage must not exceed 16.5V\\n● Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0\\n● 00489 V (5V \/ 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445\\n● Input voltage range: DC0-25V● Voltage detection range: DC0.02445 V - 25V\\n● Voltage analog resolutions: 0.00489V\\n● DC Input: positive terminal connected to VCC, GND negative pole\\n● Output interface: \\\"+\\\" then 5 \/ 3.3V, \\\"-\\\" then GND, \\\"s\\\" then the AD pin\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" This module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times\\n● You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side\\n● If 3.3V is used, the input voltage must not exceed 16.5V\\n● Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0\\n● 00489 V (5V \/ 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445\\n● Input voltage range: DC0-25V● Voltage detection range: DC0.02445 V - 25V\\n● Voltage analog resolutions: 0.00489V\\n● DC Input: positive terminal connected to VCC, GND negative pole\\n● Output interface: \\\"+\\\" then 5 \/ 3.3V, \\\"-\\\" then GND, \\\"s\\\" then the AD pin\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThis module is based on resistive voltage divider design principles, It is capable of reducing the voltage of the input terminal connection five times\u003cbr\u003e● You can use a 5V maximum voltage on the ADC side of the module so which allows for a maximum of 25V on the input side\u003cbr\u003e● If 3.3V is used, the input voltage must not exceed 16.5V\u003cbr\u003e● Because AVR chips use 10 bit ADC, the maximum resolution of this module is 0\u003cbr\u003e● 00489 V (5V \/ 1023), so the voltage detection module detects minimum input voltage is 0.00489VÁ 5 = 0.02445\u003cbr\u003e● Input voltage range: DC0-25V● Voltage detection range: DC0.02445 V - 25V\u003cbr\u003e● Voltage analog resolutions: 0.00489V\u003cbr\u003e● DC Input: positive terminal connected to VCC, GND negative pole\u003cbr\u003e● Output interface: \"+\" then 5 \/ 3.3V, \"-\" then GND, \"s\" then the AD pin\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
SpecialOffer
Save
18%
18%
You may also like:
ARDUINO
Attiny 85 Arduino Micro Usb
Description The Micro Digi-spark,an Attiny 85 based micro controller development boardProgramming port being a micro USB interfaceSimilar to the Arduino line, only cheaper, smaller, a...
Description The Micro Digi-spark,an Attiny 85 based micro controller development boardProgrammin...
In Stock
₹ 190.00
Quick View
{"id":12514234195,"title":"Attiny 85 Arduino Micro Usb","handle":"attiny-85-arduino-micro-usb","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eThe Micro Digi-spark,an Attiny 85 based micro controller development board\u003cbr\u003eProgramming port being a micro USB interface\u003cbr\u003eSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\u003cbr\u003eA whole host of shields to extend functionality\u003cbr\u003eWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\u003cbr\u003ePerfect for Arduino of extreme size.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eCompatible: Arduino IDE 1.0+(OSX\/Win\/Linux)\u003cbr\u003ePower : 5Vor7-15V(12V or less recommended, automatic selection)\u003cbr\u003eRegulator : 5V\/100mA\u003cbr\u003eI\/O Pins : 6(2 for USB when program actively communicates over USB, or 6 even when programming via USB)\u003cbr\u003eFlash Memory : 8K(about 6K after bootloader)\u003cbr\u003eInterface : I2C,SPI.\u003cbr\u003ePWM On 3 pins (more possible with Software PWM)\u003cbr\u003eADC On 4 pins.\u003cbr\u003eLED Power LED and Test\/Status LED\u003cbr\u003eOperating voltage - 3.3 V .\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-10-03T17:38:16+05:30","created_at":"2017-10-02T16:26:14+05:30","vendor":"TOMSON ELECTRONICS","type":"ARDUINO","tags":["Arduino","Development Tools","DEVELOPMENT\u0026 PROTOTYPING","TOMSON ELECTRONICS"],"price":19000,"price_min":19000,"price_max":19000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":52541404627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-19","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Attiny 85 Arduino Micro Usb","public_title":null,"options":["Default Title"],"price":19000,"weight":0,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ATtiny_85_Arduino_USB_micro.png?v=1507032480"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ATtiny_85_Arduino_USB_micro.png?v=1507032480","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eThe Micro Digi-spark,an Attiny 85 based micro controller development board\u003cbr\u003eProgramming port being a micro USB interface\u003cbr\u003eSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\u003cbr\u003eA whole host of shields to extend functionality\u003cbr\u003eWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\u003cbr\u003ePerfect for Arduino of extreme size.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eCompatible: Arduino IDE 1.0+(OSX\/Win\/Linux)\u003cbr\u003ePower : 5Vor7-15V(12V or less recommended, automatic selection)\u003cbr\u003eRegulator : 5V\/100mA\u003cbr\u003eI\/O Pins : 6(2 for USB when program actively communicates over USB, or 6 even when programming via USB)\u003cbr\u003eFlash Memory : 8K(about 6K after bootloader)\u003cbr\u003eInterface : I2C,SPI.\u003cbr\u003ePWM On 3 pins (more possible with Software PWM)\u003cbr\u003eADC On 4 pins.\u003cbr\u003eLED Power LED and Test\/Status LED\u003cbr\u003eOperating voltage - 3.3 V .\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
You may also like:
WiFi
ESP 8266 -12E WiFi IOT Module With Adapter
Description ESP-12E is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. Features Specifications:802.11 b/g/nStandards Certification:...
Description ESP-12E is the most complete module for the popular ESP8266 WiFi IoT chip and is an ...
In Stock
₹ 799.00
₹ 425.00
Quick View
{"id":12012848531,"title":"ESP 8266 -12E WiFi IOT Module With Adapter","handle":"esp8266-esp-12f-wifi-serial-iot-module","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\nESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\nESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eESP-12E is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\nESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\nESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSpecifications:\u003cbr\u003e802.11 b\/g\/n\u003cbr\u003eStandards Certification: FCC \/ CE \/ TELEC\u003cbr\u003eWireless standards: 802.11 b \/ g \/ n\u003cbr\u003eFrequency range: 2.4GHz-2.5GHz (2400M-2483.5M)\u003cbr\u003eData interface: UART \/ HSPI \/ I2C \/ I2S \/ Ir Remote Contorl GPIO \/ PWM\u003cbr\u003eOperating voltage: 3.0 ~ 3.6V (recommendation 3.3V)\u003cbr\u003eWorking Current: Average: 80mA\u003cbr\u003eOperating temperature: -40℃ ~ 125℃\u003cbr\u003eStorage temperature: Normal temperature\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-10T11:51:48+05:30","created_at":"2017-08-10T11:57:28+05:30","vendor":"TOMSON ELECTRONICS","type":"WiFi","tags":["ESP_8266","IOT \u0026 WIRELESS COMMUNICATION","ROBOTICS","TOMSON ELECTRONICS","WIFI"],"price":42500,"price_min":42500,"price_max":42500,"available":true,"price_varies":false,"compare_at_price":79900,"compare_at_price_min":79900,"compare_at_price_max":79900,"compare_at_price_varies":false,"variants":[{"id":48802313043,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RT-WIFI-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ESP 8266 -12E WiFi IOT Module With Adapter","public_title":null,"options":["Default Title"],"price":42500,"weight":200,"compare_at_price":79900,"inventory_quantity":50,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ESP8266_with_adaptor.png?v=1502956886"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ESP8266_with_adaptor.png?v=1502956886","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\nESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\nESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eESP-12E is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\nESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\nESP-12F is the most complete module for the popular ESP8266 WiFi IoT chip and is an enhanced version of ESP-12E. ESP-12F has better antenna compared to the ESP-12E, increasing its range. In all ways it is the same and is fully pin-compatible with ESP-12E.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSpecifications:\u003cbr\u003e802.11 b\/g\/n\u003cbr\u003eStandards Certification: FCC \/ CE \/ TELEC\u003cbr\u003eWireless standards: 802.11 b \/ g \/ n\u003cbr\u003eFrequency range: 2.4GHz-2.5GHz (2400M-2483.5M)\u003cbr\u003eData interface: UART \/ HSPI \/ I2C \/ I2S \/ Ir Remote Contorl GPIO \/ PWM\u003cbr\u003eOperating voltage: 3.0 ~ 3.6V (recommendation 3.3V)\u003cbr\u003eWorking Current: Average: 80mA\u003cbr\u003eOperating temperature: -40℃ ~ 125℃\u003cbr\u003eStorage temperature: Normal temperature\u003c\/span\u003e\u003c\/p\u003e"}
You may also like:
SENSORS & SENSOR MODULES
ADXL 335 3-Axis Analog Accelerometer
Description The ADXL 335, 3-axis accelerometer, now has an onboard 3.3V regulator - making it a perfect sensor module for Arduino, Raspberry Pi, and similar...
Description The ADXL 335, 3-axis accelerometer, now has an onboard 3.3V regulator - making it a ...
In Stock
₹ 329.00
₹ 273.00
Quick View
{"id":12095117971,"title":"ADXL 335 3-Axis Analog Accelerometer","handle":"adxl335-triple-axis-3-axis-accelerometer-analog-output","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eThe ADXL 335, 3-axis accelerometer, now has an onboard 3.3V regulator - making it a perfect sensor module for Arduino, Raspberry Pi, and similar Microcontrollers. This breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices and applications in Robotics is now available at Tomson Electronics, Kochi, Kerala, India.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \u003cbr\u003eThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eFully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Code for integrating an ADXL 335 with an Arduino is below,\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\/*\u003cbr\u003eADXL3xx\u003cbr\u003e \u003cbr\u003eReads an ADXL3xx accelerometer sensor module and communicates the\u003cbr\u003eacceleration to the computer. The pins used are designed to be easily\u003cbr\u003ecompatible with the breakout boards from Tomson Electronics, available from:\u003cbr\u003ewww.tomsonelectronics.com\u003cbr\u003e\u003cbr\u003eThe circuit:\u003cbr\u003eanalog 0: accelerometer self test\u003cbr\u003eanalog 1: z-axis\u003cbr\u003eanalog 2: y-axis\u003cbr\u003eanalog 3: x-axis\u003cbr\u003eanalog 4: ground\u003cbr\u003eanalog 5: vcc\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e*\/\u003cbr\u003e\u003cbr\u003e\/\/ these constants describe the pins. They won't change:\u003cbr\u003econst int groundpin = 18; \/\/ analog input pin 4 -- ground\u003cbr\u003econst int powerpin = 19; \/\/ analog input pin 5 -- voltage\u003cbr\u003econst int xpin = A3; \/\/ x-axis of the accelerometer\u003cbr\u003econst int ypin = A2; \/\/ y-axis\u003cbr\u003econst int zpin = A1; \/\/ z-axis (only on 3-axis models)\u003cbr\u003e\u003cbr\u003evoid setup()\u003cbr\u003e{\u003cbr\u003e\/\/ initialize the serial communications:\u003cbr\u003eSerial.begin(9600);\u003cbr\u003e \u003cbr\u003e\/\/ Provide ground and power by using the analog inputs as normal\u003cbr\u003e\/\/ digital pins. This makes it possible to directly connect the\u003cbr\u003e\/\/ breakout board to the Arduino. If you use the normal 5V and\u003cbr\u003e\/\/ GND pins on the Arduino, you can remove these lines.\u003cbr\u003epinMode(groundpin, OUTPUT);\u003cbr\u003epinMode(powerpin, OUTPUT);\u003cbr\u003edigitalWrite(groundpin, LOW); \u003cbr\u003edigitalWrite(powerpin, HIGH);\u003cbr\u003e}\u003cbr\u003e\u003cbr\u003evoid loop()\u003cbr\u003e{\u003cbr\u003e\/\/ print the sensor values:\u003cbr\u003eSerial.print(analogRead(xpin));\u003cbr\u003e\/\/ print a tab between values:\u003cbr\u003eSerial.print(\"\\t\");\u003cbr\u003eSerial.print(analogRead(ypin));\u003cbr\u003e\/\/ print a tab between values:\u003cbr\u003eSerial.print(\"\\t\");\u003cbr\u003eSerial.print(analogRead(zpin));\u003cbr\u003eSerial.println();\u003cbr\u003e\/\/ delay before next reading:\u003cbr\u003edelay(100);\u003cbr\u003e}\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e3-axis sensing Small, \u003cbr\u003elow-profile package 4 mm × 4 mm × 1.45 mm LFCSP \u003cbr\u003eLow power - 350 μA (typical) \u003cbr\u003eSingle-supply operation 1.8 V to 3.6 V \u003cbr\u003e0,000 g shock survival \u003cbr\u003eExcellent temperature stability \u003cbr\u003eBW adjustment with a single capacitor per axis\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-19T14:27:43+05:30","created_at":"2017-08-19T14:57:11+05:30","vendor":"TOMSON ELECTRONICS","type":"SENSORS \u0026 SENSOR MODULES","tags":["Accelerometer","DIRECTION SENSOR","ROBOTICS","Sensors \u0026 Sensor Modules"],"price":27300,"price_min":27300,"price_max":27300,"available":true,"price_varies":false,"compare_at_price":32900,"compare_at_price_min":32900,"compare_at_price_max":32900,"compare_at_price_varies":false,"variants":[{"id":49706076627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RB-SSAC-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ADXL 335 3-Axis Analog Accelerometer","public_title":null,"options":["Default Title"],"price":27300,"weight":100,"compare_at_price":32900,"inventory_quantity":42,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ADXL_335.png?v=1503303547"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ADXL_335.png?v=1503303547","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eThe ADXL 335, 3-axis accelerometer, now has an onboard 3.3V regulator - making it a perfect sensor module for Arduino, Raspberry Pi, and similar Microcontrollers. This breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices and applications in Robotics is now available at Tomson Electronics, Kochi, Kerala, India.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \u003cbr\u003eThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eFully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Code for integrating an ADXL 335 with an Arduino is below,\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\/*\u003cbr\u003eADXL3xx\u003cbr\u003e \u003cbr\u003eReads an ADXL3xx accelerometer sensor module and communicates the\u003cbr\u003eacceleration to the computer. The pins used are designed to be easily\u003cbr\u003ecompatible with the breakout boards from Tomson Electronics, available from:\u003cbr\u003ewww.tomsonelectronics.com\u003cbr\u003e\u003cbr\u003eThe circuit:\u003cbr\u003eanalog 0: accelerometer self test\u003cbr\u003eanalog 1: z-axis\u003cbr\u003eanalog 2: y-axis\u003cbr\u003eanalog 3: x-axis\u003cbr\u003eanalog 4: ground\u003cbr\u003eanalog 5: vcc\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e*\/\u003cbr\u003e\u003cbr\u003e\/\/ these constants describe the pins. They won't change:\u003cbr\u003econst int groundpin = 18; \/\/ analog input pin 4 -- ground\u003cbr\u003econst int powerpin = 19; \/\/ analog input pin 5 -- voltage\u003cbr\u003econst int xpin = A3; \/\/ x-axis of the accelerometer\u003cbr\u003econst int ypin = A2; \/\/ y-axis\u003cbr\u003econst int zpin = A1; \/\/ z-axis (only on 3-axis models)\u003cbr\u003e\u003cbr\u003evoid setup()\u003cbr\u003e{\u003cbr\u003e\/\/ initialize the serial communications:\u003cbr\u003eSerial.begin(9600);\u003cbr\u003e \u003cbr\u003e\/\/ Provide ground and power by using the analog inputs as normal\u003cbr\u003e\/\/ digital pins. This makes it possible to directly connect the\u003cbr\u003e\/\/ breakout board to the Arduino. If you use the normal 5V and\u003cbr\u003e\/\/ GND pins on the Arduino, you can remove these lines.\u003cbr\u003epinMode(groundpin, OUTPUT);\u003cbr\u003epinMode(powerpin, OUTPUT);\u003cbr\u003edigitalWrite(groundpin, LOW); \u003cbr\u003edigitalWrite(powerpin, HIGH);\u003cbr\u003e}\u003cbr\u003e\u003cbr\u003evoid loop()\u003cbr\u003e{\u003cbr\u003e\/\/ print the sensor values:\u003cbr\u003eSerial.print(analogRead(xpin));\u003cbr\u003e\/\/ print a tab between values:\u003cbr\u003eSerial.print(\"\\t\");\u003cbr\u003eSerial.print(analogRead(ypin));\u003cbr\u003e\/\/ print a tab between values:\u003cbr\u003eSerial.print(\"\\t\");\u003cbr\u003eSerial.print(analogRead(zpin));\u003cbr\u003eSerial.println();\u003cbr\u003e\/\/ delay before next reading:\u003cbr\u003edelay(100);\u003cbr\u003e}\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:\\n3-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the . \\nThis breakout comes with 3 analog outputs for X, Y and Z axis breakout board. The ADXL335 is the latest and greatest from Analog Devices, known for their exceptional quality MEMS devices. \\nThe VCC takes up to 5V in and regulates it to 3.3V with an output pin. \\nThe analog outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.\\n Fully assembled and tested. The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e3-axis sensing Small, \u003cbr\u003elow-profile package 4 mm × 4 mm × 1.45 mm LFCSP \u003cbr\u003eLow power - 350 μA (typical) \u003cbr\u003eSingle-supply operation 1.8 V to 3.6 V \u003cbr\u003e0,000 g shock survival \u003cbr\u003eExcellent temperature stability \u003cbr\u003eBW adjustment with a single capacitor per axis\u003c\/span\u003e\u003c\/p\u003e"}
You may also like:
WEATHER SENSOR
Soil Moisture Sensor
Description The Soil Moisture Sensor available at Tomson Electronics, Kochi, Kerala, India, is a simple breakout for measuring the moisture in soil or similar materials....
Description The Soil Moisture Sensor available at Tomson Electronics, Kochi, Kerala, India, is a...
In Stock
₹ 249.00
₹ 100.00
Quick View
{"id":12142705939,"title":"Soil Moisture Sensor","handle":"soil-moisture-sensor","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"This is a simple water sensor, can be used to detect soil moisture\\nModule Output is high level when the soil moisture deficit,or output is low\\nCan be used in module plant waterer device, and the plants in your garden no need people to manage\\nInstructions for Use:Soil Moisture Sensor\\nSoil moisture module is most sensitive to the ambient humidity is generally used to detect the moisture content of the soil\\nModule to reach the threshold value is set in the soil moisture, DO port output high, when the the soil humidity exceeds a set threshold value, the module D0 output low\\nThe digital output D0 can be connected directly with the microcontroller to detect high and low by the microcontroller to detect soil moisture\\nThe digital outputs DO shop relay module can directly drive the buzzer module, which can form a soil moisture alarm equipment\\nAnalog output AO and AD module connected through the AD converter, you can get more precise values of soil moisture\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe Soil Moisture Sensor available at Tomson Electronics, Kochi, Kerala, India, is a simple breakout for measuring the moisture in soil or similar materials. The soil sensor is very easy to use, The two large exposed pads\/leads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out. It can be easily interfaced with your Arduino or Raspberry Pi ease for your home automation projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCopy the following Code to your Arduino device to get the reading from this Soil Moisture Sensor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\/*\u003cbr\u003eAnalog input, analog output, serial output\u003cbr\u003e\u003cbr\u003eReads an analog input pin, maps the result to a range from 0 to 255 and uses\u003cbr\u003ethe result to set the pulse width modulation (PWM) of an output pin.\u003cbr\u003eAlso prints the results to the Serial Monitor.\u003cbr\u003e\u003cbr\u003eThe circuit:\u003cbr\u003e- Water Level Sensor connected to analog pin 0.\u003cbr\u003eSignal pin of the Soil Moisture Sensor goes to the analog pin.\u003cbr\u003e- LED connected from digital pin 9 to ground\u003cbr\u003e\u003cbr\u003eby Tom, Tomson Electronics\u003cbr\u003e\u003cbr\u003eThis example code is in the public domain.\u003cbr\u003e*\/\u003cbr\u003e\u003cbr\u003e\/\/ These constants won't change. They're used to give names to the pins used:\u003cbr\u003econst int analogInPin = A0; \/\/ Analog input pin that the Soil Moisture Sensor is attached to\u003cbr\u003econst int analogOutPin = 9; \/\/ Analog output pin that the LED is attached to\u003cbr\u003e\u003cbr\u003eint sensorValue = 0; \/\/ value read from the sensor\u003cbr\u003eint outputValue = 0; \/\/ value output to the PWM (analog out)\u003cbr\u003e\u003cbr\u003evoid setup() {\u003cbr\u003e\/\/ initialize serial communications at 9600 bps:\u003cbr\u003eSerial.begin(9600);\u003cbr\u003e}\u003cbr\u003e\u003cbr\u003evoid loop() {\u003cbr\u003e\/\/ read the analog in value:\u003cbr\u003esensorValue = analogRead(analogInPin);\u003cbr\u003e\/\/ map it to the range of the analog out:\u003cbr\u003eoutputValue = map(sensorValue, 0, 1023, 0, 255);\u003cbr\u003e\/\/ change the analog out value:\u003cbr\u003eanalogWrite(analogOutPin, outputValue);\u003cbr\u003e\u003cbr\u003e\/\/ print the results to the Serial Monitor:\u003cbr\u003eSerial.print(\"sensor = \");\u003cbr\u003eSerial.print(sensorValue);\u003cbr\u003eSerial.print(\"\\t output = \");\u003cbr\u003eSerial.println(outputValue);\u003cbr\u003e\u003cbr\u003e\/\/ wait 2 milliseconds before the next loop for the analog-to-digital\u003cbr\u003e\/\/ converter to settle after the last reading:\u003cbr\u003edelay(2);\u003cbr\u003e}\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"This is a simple water sensor, can be used to detect soil moisture\\nModule Output is high level when the soil moisture deficit,or output is low\\nCan be used in module plant waterer device, and the plants in your garden no need people to manage\\nInstructions for Use:Soil Moisture Sensor\\nSoil moisture module is most sensitive to the ambient humidity is generally used to detect the moisture content of the soil\\nModule to reach the threshold value is set in the soil moisture, DO port output high, when the the soil humidity exceeds a set threshold value, the module D0 output low\\nThe digital output D0 can be connected directly with the microcontroller to detect high and low by the microcontroller to detect soil moisture\\nThe digital outputs DO shop relay module can directly drive the buzzer module, which can form a soil moisture alarm equipment\\nAnalog output AO and AD module connected through the AD converter, you can get more precise values of soil moisture\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"This is a simple water sensor, can be used to detect soil moisture\\nModule Output is high level when the soil moisture deficit,or output is low\\nCan be used in module plant waterer device, and the plants in your garden no need people to manage\\nInstructions for Use:Soil Moisture Sensor\\nSoil moisture module is most sensitive to the ambient humidity is generally used to detect the moisture content of the soil\\nModule to reach the threshold value is set in the soil moisture, DO port output high, when the the soil humidity exceeds a set threshold value, the module D0 output low\\nThe digital output D0 can be connected directly with the microcontroller to detect high and low by the microcontroller to detect soil moisture\\nThe digital outputs DO shop relay module can directly drive the buzzer module, which can form a soil moisture alarm equipment\\nAnalog output AO and AD module connected through the AD converter, you can get more precise values of soil moisture\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eOperating voltage: 3.3V~5V\u003cbr\u003eDual output mode, analog output more accurate\u003cbr\u003eA fixed bolt hole for easy installation\u003cbr\u003eWith power indicator (red) and digital switching output indicator (green)\u003cbr\u003eHaving LM393 comparator chip, stable\u003cbr\u003ePanel PCB Dimension: Approx.3cm x 1.5cm\u003cbr\u003eSoil Probe Dimension: Approx. 6cm x 3cm\u003cbr\u003eCable Length: Approx.21cm\u003cbr\u003eInterface Description(4-wire):\u003cbr\u003eVCC: 3.3V-5V\u003cbr\u003eGND: GND\u003cbr\u003eDO: digital output interface(0 and 1)\u003cbr\u003eAO: analog output interface\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-25T11:10:42+05:30","created_at":"2017-08-25T11:33:19+05:30","vendor":"TOMSON ELECTRONICS","type":"WEATHER SENSOR","tags":["ROBOTICS","Sensors \u0026 Sensor Modules","Soil_Moisture","TOMSON ELECTRONICS","weather Sensor"],"price":10000,"price_min":10000,"price_max":10000,"available":true,"price_varies":false,"compare_at_price":24900,"compare_at_price_min":24900,"compare_at_price_max":24900,"compare_at_price_varies":false,"variants":[{"id":50166923667,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SS-CRT-06","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Soil Moisture Sensor","public_title":null,"options":["Default Title"],"price":10000,"weight":100,"compare_at_price":24900,"inventory_quantity":8,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/SOIL_MOISTURE_SENSOR.png?v=1503641010"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/SOIL_MOISTURE_SENSOR.png?v=1503641010","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"This is a simple water sensor, can be used to detect soil moisture\\nModule Output is high level when the soil moisture deficit,or output is low\\nCan be used in module plant waterer device, and the plants in your garden no need people to manage\\nInstructions for Use:Soil Moisture Sensor\\nSoil moisture module is most sensitive to the ambient humidity is generally used to detect the moisture content of the soil\\nModule to reach the threshold value is set in the soil moisture, DO port output high, when the the soil humidity exceeds a set threshold value, the module D0 output low\\nThe digital output D0 can be connected directly with the microcontroller to detect high and low by the microcontroller to detect soil moisture\\nThe digital outputs DO shop relay module can directly drive the buzzer module, which can form a soil moisture alarm equipment\\nAnalog output AO and AD module connected through the AD converter, you can get more precise values of soil moisture\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThe Soil Moisture Sensor available at Tomson Electronics, Kochi, Kerala, India, is a simple breakout for measuring the moisture in soil or similar materials. The soil sensor is very easy to use, The two large exposed pads\/leads function as probes for the sensor, together acting as a variable resistor. The more water that is in the soil means the better the conductivity between the pads will be and will result in a lower resistance, and a higher SIG out. It can be easily interfaced with your Arduino or Raspberry Pi ease for your home automation projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCopy the following Code to your Arduino device to get the reading from this Soil Moisture Sensor.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\/*\u003cbr\u003eAnalog input, analog output, serial output\u003cbr\u003e\u003cbr\u003eReads an analog input pin, maps the result to a range from 0 to 255 and uses\u003cbr\u003ethe result to set the pulse width modulation (PWM) of an output pin.\u003cbr\u003eAlso prints the results to the Serial Monitor.\u003cbr\u003e\u003cbr\u003eThe circuit:\u003cbr\u003e- Water Level Sensor connected to analog pin 0.\u003cbr\u003eSignal pin of the Soil Moisture Sensor goes to the analog pin.\u003cbr\u003e- LED connected from digital pin 9 to ground\u003cbr\u003e\u003cbr\u003eby Tom, Tomson Electronics\u003cbr\u003e\u003cbr\u003eThis example code is in the public domain.\u003cbr\u003e*\/\u003cbr\u003e\u003cbr\u003e\/\/ These constants won't change. They're used to give names to the pins used:\u003cbr\u003econst int analogInPin = A0; \/\/ Analog input pin that the Soil Moisture Sensor is attached to\u003cbr\u003econst int analogOutPin = 9; \/\/ Analog output pin that the LED is attached to\u003cbr\u003e\u003cbr\u003eint sensorValue = 0; \/\/ value read from the sensor\u003cbr\u003eint outputValue = 0; \/\/ value output to the PWM (analog out)\u003cbr\u003e\u003cbr\u003evoid setup() {\u003cbr\u003e\/\/ initialize serial communications at 9600 bps:\u003cbr\u003eSerial.begin(9600);\u003cbr\u003e}\u003cbr\u003e\u003cbr\u003evoid loop() {\u003cbr\u003e\/\/ read the analog in value:\u003cbr\u003esensorValue = analogRead(analogInPin);\u003cbr\u003e\/\/ map it to the range of the analog out:\u003cbr\u003eoutputValue = map(sensorValue, 0, 1023, 0, 255);\u003cbr\u003e\/\/ change the analog out value:\u003cbr\u003eanalogWrite(analogOutPin, outputValue);\u003cbr\u003e\u003cbr\u003e\/\/ print the results to the Serial Monitor:\u003cbr\u003eSerial.print(\"sensor = \");\u003cbr\u003eSerial.print(sensorValue);\u003cbr\u003eSerial.print(\"\\t output = \");\u003cbr\u003eSerial.println(outputValue);\u003cbr\u003e\u003cbr\u003e\/\/ wait 2 milliseconds before the next loop for the analog-to-digital\u003cbr\u003e\/\/ converter to settle after the last reading:\u003cbr\u003edelay(2);\u003cbr\u003e}\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"This is a simple water sensor, can be used to detect soil moisture\\nModule Output is high level when the soil moisture deficit,or output is low\\nCan be used in module plant waterer device, and the plants in your garden no need people to manage\\nInstructions for Use:Soil Moisture Sensor\\nSoil moisture module is most sensitive to the ambient humidity is generally used to detect the moisture content of the soil\\nModule to reach the threshold value is set in the soil moisture, DO port output high, when the the soil humidity exceeds a set threshold value, the module D0 output low\\nThe digital output D0 can be connected directly with the microcontroller to detect high and low by the microcontroller to detect soil moisture\\nThe digital outputs DO shop relay module can directly drive the buzzer module, which can form a soil moisture alarm equipment\\nAnalog output AO and AD module connected through the AD converter, you can get more precise values of soil moisture\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"This is a simple water sensor, can be used to detect soil moisture\\nModule Output is high level when the soil moisture deficit,or output is low\\nCan be used in module plant waterer device, and the plants in your garden no need people to manage\\nInstructions for Use:Soil Moisture Sensor\\nSoil moisture module is most sensitive to the ambient humidity is generally used to detect the moisture content of the soil\\nModule to reach the threshold value is set in the soil moisture, DO port output high, when the the soil humidity exceeds a set threshold value, the module D0 output low\\nThe digital output D0 can be connected directly with the microcontroller to detect high and low by the microcontroller to detect soil moisture\\nThe digital outputs DO shop relay module can directly drive the buzzer module, which can form a soil moisture alarm equipment\\nAnalog output AO and AD module connected through the AD converter, you can get more precise values of soil moisture\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eOperating voltage: 3.3V~5V\u003cbr\u003eDual output mode, analog output more accurate\u003cbr\u003eA fixed bolt hole for easy installation\u003cbr\u003eWith power indicator (red) and digital switching output indicator (green)\u003cbr\u003eHaving LM393 comparator chip, stable\u003cbr\u003ePanel PCB Dimension: Approx.3cm x 1.5cm\u003cbr\u003eSoil Probe Dimension: Approx. 6cm x 3cm\u003cbr\u003eCable Length: Approx.21cm\u003cbr\u003eInterface Description(4-wire):\u003cbr\u003eVCC: 3.3V-5V\u003cbr\u003eGND: GND\u003cbr\u003eDO: digital output interface(0 and 1)\u003cbr\u003eAO: analog output interface\u003c\/span\u003e\u003c\/p\u003e"}
You may also like:
SIGNAL PROCESSING MODULES
USB to TTL Converter
Description CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate...
Description CP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal e...
In Stock
₹ 199.00
₹ 142.00
Quick View
{"id":11710393427,"title":"USB to TTL Converter","handle":"usb-ttl-converter","description":"\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eCP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Hobbyists can use it as a powerful tool to make all kinds of PC interfaced projects. This module help all those who are comfortable with RS232\/Serial Communication protocol, to build USB devices very easily.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-07-14T13:45:31+05:30","created_at":"2017-07-14T13:48:26+05:30","vendor":"TOMSON ELECTRONICS","type":"SIGNAL PROCESSING MODULES","tags":["ROBOTICS","Signal","Signal Processing Modules","TOMSON ELECTRONICS","TTL","USB"],"price":14200,"price_min":14200,"price_max":14200,"available":true,"price_varies":false,"compare_at_price":19900,"compare_at_price_min":19900,"compare_at_price_max":19900,"compare_at_price_varies":false,"variants":[{"id":46486423315,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"I5-SPM-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"USB to TTL Converter","public_title":null,"options":["Default Title"],"price":14200,"weight":50,"compare_at_price":19900,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/USB_TO_TTL_2.png?v=1503304019","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/USB_TO_TTL.png?v=1503304021"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/USB_TO_TTL_2.png?v=1503304019","options":["Title"],"content":"\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eCP2102 chip from SiLabs is a single chip USB to UART bridge IC. It requires minimal external components. CP2102 can be used to migrate legacy serial port based devices to USB. Hobbyists can use it as a powerful tool to make all kinds of PC interfaced projects. This module help all those who are comfortable with RS232\/Serial Communication protocol, to build USB devices very easily.\u003c\/span\u003e\u003c\/p\u003e"}
You may also like:
Out Stock
Sold Out
Quick View
{"id":12143982611,"title":"Uni-T UT-33D","handle":"uni-t-ut-33d","description":"","published_at":"2017-11-30T10:32:14+05:30","created_at":"2017-08-25T17:07:32+05:30","vendor":"TOMSON ELECTRONICS","type":"MULTIMETER","tags":["multimeter","TEST \u0026 MEASUREMENT","TOMSON ELECTRONICS","UT-33D"],"price":69000,"price_min":69000,"price_max":69000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":50196133395,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TM-MR-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"Uni-T UT-33D","public_title":null,"options":["Default Title"],"price":69000,"weight":500,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ut-33d.png?v=1503661068","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/71_fQ_nQ92L._SL1275.jpg?v=1503661072"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ut-33d.png?v=1503661068","options":["Title"],"content":""}
SpecialOffer
WemosDi ESP8266-12E Arduino Uno Compatible Wifi Proto Shield
₹ 637.20
Already Sold: 5
Available: 1
Hurry Up! Offer ends in:
You may also like:
POTENTIOMETERS & TRIMMERS
Rotary Potentiometer - 10k Ohm
Description An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND...
Description An adjustable potentiometer can open up many interesting user interfaces. Turn the po...
In Stock
₹ 12.00
Quick View
{"id":12108241363,"title":"Rotary Potentiometer - 10k Ohm","handle":"rotary-potentiometer-10k-ohm-1","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user! .This pot has a ¼\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\u003c\/span\u003e","published_at":"2017-08-21T12:19:19+05:30","created_at":"2017-08-21T12:25:25+05:30","vendor":"TOMSON ELECTRONICS","type":"POTENTIOMETERS \u0026 TRIMMERS","tags":["PASSIVES","Potentiometer","Potentiometers \u0026 Trimmers","TOMSON ELECTRONICS"],"price":1200,"price_min":1200,"price_max":1200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49818584275,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PP - PT - 09","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Rotary Potentiometer - 10k Ohm","public_title":null,"options":["Default Title"],"price":1200,"weight":100,"compare_at_price":null,"inventory_quantity":497,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT_6fd67276-dcac-4829-8815-816e277d0cf7.png?v=1503298557"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT_6fd67276-dcac-4829-8815-816e277d0cf7.png?v=1503298557","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user! .This pot has a ¼\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\u003c\/span\u003e"}
You may also like:
POTENTIOMETERS & TRIMMERS
Rotary Potentiometer - 100K ohm
Description An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND...
Description An adjustable potentiometer can open up many interesting user interfaces. Turn the po...
In Stock
₹ 12.00
Quick View
{"id":12108187923,"title":"Rotary Potentiometer - 100K ohm","handle":"rotary-potentiometer-100k-ohm-1","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user! . This pot has a ¼\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\u003c\/span\u003e","published_at":"2017-08-21T12:07:36+05:30","created_at":"2017-08-21T12:18:06+05:30","vendor":"TOMSON ELECTRONICS","type":"POTENTIOMETERS \u0026 TRIMMERS","tags":["PASSIVES","Potentiometer","Potentiometers \u0026 Trimmers","TOMSON ELECTRONICS"],"price":1200,"price_min":1200,"price_max":1200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49818015379,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PP - PT - 08","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Rotary Potentiometer - 100K ohm","public_title":null,"options":["Default Title"],"price":1200,"weight":100,"compare_at_price":null,"inventory_quantity":499,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT_d7355cb2-4ee0-440c-b96a-e8ba1525facc.png?v=1503298103"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT_d7355cb2-4ee0-440c-b96a-e8ba1525facc.png?v=1503298103","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user! . This pot has a ¼\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\u003c\/span\u003e"}
You may also like:
POTENTIOMETERS & TRIMMERS
Rotary Potentiometer - 1k Ohm
Description An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND...
Description An adjustable potentiometer can open up many interesting user interfaces. Turn the ...
In Stock
₹ 10.00
Quick View
{"id":11940755667,"title":"Rotary Potentiometer - 1k Ohm","handle":"rotary-potentiometer-1k-ohm","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 1K linear taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription \u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 1K linear taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a micro-controller and get a variable input from the user!This pot has a ¼\" mounting diameter and has a 1K linear taper. \u003c\/span\u003e","published_at":"2017-08-02T16:07:25+05:30","created_at":"2017-08-02T16:28:09+05:30","vendor":"TOMSON ELECTRONICS","type":"POTENTIOMETERS \u0026 TRIMMERS","tags":["PASSIVES","Potentiometer","Potentiometers \u0026 Trimmers"],"price":1000,"price_min":1000,"price_max":1000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47908897235,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PP - PT - 01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Rotary Potentiometer - 1k Ohm","public_title":null,"options":["Default Title"],"price":1000,"weight":100,"compare_at_price":null,"inventory_quantity":498,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT.png?v=1503298763"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT.png?v=1503298763","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 1K linear taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription \u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 1K linear taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a micro-controller and get a variable input from the user!This pot has a ¼\" mounting diameter and has a 1K linear taper. \u003c\/span\u003e"}
You may also like:
POTENTIOMETERS & TRIMMERS
Cermet Preset 1K Ω (ohm) Variable Resistor
Description Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is...
Description Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins....
In Stock
₹ 5.00
Quick View
{"id":11947445651,"title":"Cermet Preset 1K Ω (ohm) Variable Resistor","handle":"cermet-preset-1k-ohm-variable-resistor","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eCermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\u003cbr\u003eThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures \u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cbr\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSpecifications:\u003cbr\u003eTrack Resistance: 1K ohm\u003cbr\u003eNo. of Turns: 1\u003cbr\u003eResistance Tolerance: ± 10%\u003cbr\u003eTemperature Coefficient: ± 100 ppm\/°C\u003cbr\u003ePotentiometer Mounting: Through Hole\u003cbr\u003eAdjustment Type: Top\u003cbr\u003eContact Resistance Variation +: 1%\u003cbr\u003eFull Power Rating Temperature: 85°C\u003cbr\u003eLead Diameter: 0.5 mm\u003cbr\u003eOperating Temperature Range: -55°C to +125°C\u003cbr\u003eResistance: 10 K ohm\u003cbr\u003eResistor Element Material: Variable Rotary Cermet\u003c\/span\u003e","published_at":"2017-08-03T10:15:47+05:30","created_at":"2017-08-03T10:33:03+05:30","vendor":"TOMSON ELECTRONICS","type":"POTENTIOMETERS \u0026 TRIMMERS","tags":["Potentiometer","Potentiometers \u0026 Trimmers","preset","TOMSON ELECTRONICS"],"price":500,"price_min":500,"price_max":500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":47968442771,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3.00","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Cermet Preset 1K Ω (ohm) Variable Resistor","public_title":null,"options":["Default Title"],"price":500,"weight":15,"compare_at_price":null,"inventory_quantity":498,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5.00"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/PRESET_CERMET.png?v=1501736655","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/PRESET.png?v=1501736655"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/PRESET_CERMET.png?v=1501736655","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eCermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\u003cbr\u003eThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures \u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\u003cbr\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Cermet preset is a compact variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSpecifications:\u003cbr\u003eTrack Resistance: 1K ohm\u003cbr\u003eNo. of Turns: 1\u003cbr\u003eResistance Tolerance: ± 10%\u003cbr\u003eTemperature Coefficient: ± 100 ppm\/°C\u003cbr\u003ePotentiometer Mounting: Through Hole\u003cbr\u003eAdjustment Type: Top\u003cbr\u003eContact Resistance Variation +: 1%\u003cbr\u003eFull Power Rating Temperature: 85°C\u003cbr\u003eLead Diameter: 0.5 mm\u003cbr\u003eOperating Temperature Range: -55°C to +125°C\u003cbr\u003eResistance: 10 K ohm\u003cbr\u003eResistor Element Material: Variable Rotary Cermet\u003c\/span\u003e"}
You may also like:
TRIMPOT
Trimpot Variable Resistor - 3296
Description Trimmer/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is...
Description Trimmer/Trimpots is a high accuracy variable resistor and pcb mountable with 3 termin...
In Stock
₹ 15.00
Quick View
{"id":12108734355,"title":"Trimpot Variable Resistor - 3296","handle":"trimpot-variable-resistor-3296","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Trimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5097,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Trimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5097,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTrimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\u003cbr\u003eThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0 v and Vcc as the rotary cermet is rotated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures \u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Specifications:\\nTrack Resistance: 100Kohm\\nResistance Tolerance: ± 5%\\nTemperature Coefficient: ± 50ppm\/°C\\nPotentiometer Mounting: Through Hole\\nAdjustment Type: Top\\nContact Resistance Variation +: 1%\\nFull Power Rating Temperature: 85°C\\nLead Diameter: 0.5mm\\nOperating Temperature Range: -55°C to +125°C\\nResistance: 1Kohm\\nResistor Element Material: Variable Rotary Trimmer\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSpecifications:\u003cbr\u003eTrack Resistance: 100 K ohm\u003cbr\u003eResistance Tolerance: ± 5%\u003cbr\u003eTemperature Coefficient: ± 50 ppm\/°C\u003cbr\u003ePotentiometer Mounting: Through Hole\u003cbr\u003eAdjustment Type: Top\u003cbr\u003eContact Resistance Variation +: 1%\u003cbr\u003eFull Power Rating Temperature: 85°C\u003cbr\u003eLead Diameter: 0.5mm\u003cbr\u003eOperating Temperature Range: -55°C to +125°C\u003cbr\u003eResistance: 1 K ohm ,2k ohm ,5k ohm , 10k ohm , 20k ohm, 50k ohm , 100k ohm , 500k ohm, 1 meG ohm\u003cbr\u003eResistor Element Material: Variable Rotary Trimmer\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-21T13:17:24+05:30","created_at":"2017-08-21T13:28:12+05:30","vendor":"TOMSON ELECTRONICS","type":"TRIMPOT","tags":["PASSIVES","Potentiometer","Potentiometers \u0026 Trimmers","TOMSON ELECTRONICS","Trimpot"],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49825158547,"title":"1 kΩ","option1":"1 kΩ","option2":null,"option3":null,"sku":"PP-TM-28","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 1 kΩ","public_title":"1 kΩ","options":["1 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49825158611,"title":"2 kΩ","option1":"2 kΩ","option2":null,"option3":null,"sku":"PP-TM-29","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 2 kΩ","public_title":"2 kΩ","options":["2 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49825158675,"title":"5 kΩ","option1":"5 kΩ","option2":null,"option3":null,"sku":"PP-TM-30","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 5 kΩ","public_title":"5 kΩ","options":["5 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49825158739,"title":"10 kΩ","option1":"10 kΩ","option2":null,"option3":null,"sku":"PP-TM-31","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 10 kΩ","public_title":"10 kΩ","options":["10 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49825158803,"title":"20 kΩ","option1":"20 kΩ","option2":null,"option3":null,"sku":"PP-TM-32","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 20 kΩ","public_title":"20 kΩ","options":["20 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49825158867,"title":"50 kΩ","option1":"50 kΩ","option2":null,"option3":null,"sku":"PP-TM-33","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 50 kΩ","public_title":"50 kΩ","options":["50 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49825158931,"title":"100 kΩ","option1":"100 kΩ","option2":null,"option3":null,"sku":"PP-TM-34","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 100 kΩ","public_title":"100 kΩ","options":["100 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49825158995,"title":"500 kΩ","option1":"500 kΩ","option2":null,"option3":null,"sku":"PP-TM-35","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 500 kΩ","public_title":"500 kΩ","options":["500 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49825159059,"title":"1 MEGΩ","option1":"1 MEGΩ","option2":null,"option3":null,"sku":"PP-TM-36","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3296 - 1 MEGΩ","public_title":"1 MEGΩ","options":["1 MEGΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/TRIMPOT_3296_2_a8ef9f85-7af8-43db-bb77-82e3777bf7c9.png?v=1503302365"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/TRIMPOT_3296_2_a8ef9f85-7af8-43db-bb77-82e3777bf7c9.png?v=1503302365","options":["Values"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Trimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5097,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Trimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5097,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTrimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\u003cbr\u003eThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0 v and Vcc as the rotary cermet is rotated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures \u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Specifications:\\nTrack Resistance: 100Kohm\\nResistance Tolerance: ± 5%\\nTemperature Coefficient: ± 50ppm\/°C\\nPotentiometer Mounting: Through Hole\\nAdjustment Type: Top\\nContact Resistance Variation +: 1%\\nFull Power Rating Temperature: 85°C\\nLead Diameter: 0.5mm\\nOperating Temperature Range: -55°C to +125°C\\nResistance: 1Kohm\\nResistor Element Material: Variable Rotary Trimmer\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSpecifications:\u003cbr\u003eTrack Resistance: 100 K ohm\u003cbr\u003eResistance Tolerance: ± 5%\u003cbr\u003eTemperature Coefficient: ± 50 ppm\/°C\u003cbr\u003ePotentiometer Mounting: Through Hole\u003cbr\u003eAdjustment Type: Top\u003cbr\u003eContact Resistance Variation +: 1%\u003cbr\u003eFull Power Rating Temperature: 85°C\u003cbr\u003eLead Diameter: 0.5mm\u003cbr\u003eOperating Temperature Range: -55°C to +125°C\u003cbr\u003eResistance: 1 K ohm ,2k ohm ,5k ohm , 10k ohm , 20k ohm, 50k ohm , 100k ohm , 500k ohm, 1 meG ohm\u003cbr\u003eResistor Element Material: Variable Rotary Trimmer\u003c\/span\u003e\u003c\/p\u003e"}
You may also like:
TRIMPOT
Trimpot Variable Resistor - 3006
Description Trimmer/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is...
Description Trimmer/Trimpots is a high accuracy variable resistor and pcb mountable with 3 termin...
In Stock
₹ 15.00
Quick View
{"id":12108652499,"title":"Trimpot Variable Resistor - 3006","handle":"trimpot-variable-resistor-3006","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Trimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5097,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Trimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5097,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTrimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\u003cbr\u003eThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0 v and Vcc as the rotary cermet is rotated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures \u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Specifications:\\nTrack Resistance: 100Kohm\\nResistance Tolerance: ± 5%\\nTemperature Coefficient: ± 50ppm\/°C\\nPotentiometer Mounting: Through Hole\\nAdjustment Type: Top\\nContact Resistance Variation +: 1%\\nFull Power Rating Temperature: 85°C\\nLead Diameter: 0.5mm\\nOperating Temperature Range: -55°C to +125°C\\nResistance: 1Kohm\\nResistor Element Material: Variable Rotary Trimmer\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSpecifications:\u003cbr\u003eTrack Resistance: 100 K ohm\u003cbr\u003eResistance Tolerance: ± 5%\u003cbr\u003eTemperature Coefficient: ± 50 ppm\/°C\u003cbr\u003ePotentiometer Mounting: Through Hole\u003cbr\u003eAdjustment Type: Top\u003cbr\u003eContact Resistance Variation +: 1%\u003cbr\u003eFull Power Rating Temperature: 85°C\u003cbr\u003eLead Diameter: 0.5mm\u003cbr\u003eOperating Temperature Range: -55°C to +125°C\u003cbr\u003eResistance: 1 K ohm ,2k ohm ,5k ohm , 10k ohm , 20k ohm, 50k ohm , 100k ohm , 500k ohm, 1 meG ohm\u003cbr\u003eResistor Element Material: Variable Rotary Trimmer\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-21T13:14:46+05:30","created_at":"2017-08-21T13:16:56+05:30","vendor":"TOMSON ELECTRONICS","type":"TRIMPOT","tags":["PASSIVES","Potentiometer","Potentiometers \u0026 Trimmers","TOMSON ELECTRONICS","Trimpot"],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49823919763,"title":"1 kΩ","option1":"1 kΩ","option2":null,"option3":null,"sku":"PP-TM-19","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 1 kΩ","public_title":"1 kΩ","options":["1 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49824542099,"title":"2 kΩ","option1":"2 kΩ","option2":null,"option3":null,"sku":"PP-TM-20","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 2 kΩ","public_title":"2 kΩ","options":["2 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49824542163,"title":"5kΩ","option1":"5kΩ","option2":null,"option3":null,"sku":"PP-TM-21","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 5kΩ","public_title":"5kΩ","options":["5kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49824542227,"title":"10 kΩ","option1":"10 kΩ","option2":null,"option3":null,"sku":"PP-TM-22","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 10 kΩ","public_title":"10 kΩ","options":["10 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49824542291,"title":"20 kΩ","option1":"20 kΩ","option2":null,"option3":null,"sku":"PP-TM-23","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 20 kΩ","public_title":"20 kΩ","options":["20 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49824542355,"title":"50 kΩ","option1":"50 kΩ","option2":null,"option3":null,"sku":"PP-TM-24","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 50 kΩ","public_title":"50 kΩ","options":["50 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49824542419,"title":"100 kΩ","option1":"100 kΩ","option2":null,"option3":null,"sku":"PP-TM-25","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 100 kΩ","public_title":"100 kΩ","options":["100 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49824542483,"title":"500 kΩ","option1":"500 kΩ","option2":null,"option3":null,"sku":"PP-TM-26","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 500 kΩ","public_title":"500 kΩ","options":["500 kΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""},{"id":49824542547,"title":"1 MEGΩ","option1":"1 MEGΩ","option2":null,"option3":null,"sku":"PP-TM-27","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Trimpot Variable Resistor - 3006 - 1 MEGΩ","public_title":"1 MEGΩ","options":["1 MEGΩ"],"price":1500,"weight":30,"compare_at_price":null,"inventory_quantity":500,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/TRIMPOT_3006.jpg?v=1503301649"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/TRIMPOT_3006.jpg?v=1503301649","options":["Values"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Trimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5097,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Trimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\\nThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and cetner pin outputs a variable volatge between 0v and Vcc as the rotary cermet is rotated.\"}' data-sheets-userformat='{\"2\":5097,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTrimmer\/Trimpots is a high accuracy variable resistor and pcb mountable with 3 terminal pins. The voltage between the terminal varies as the trimpot is rotated.\u003cbr\u003eThe Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0 v and Vcc as the rotary cermet is rotated.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures \u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Specifications:\\nTrack Resistance: 100Kohm\\nResistance Tolerance: ± 5%\\nTemperature Coefficient: ± 50ppm\/°C\\nPotentiometer Mounting: Through Hole\\nAdjustment Type: Top\\nContact Resistance Variation +: 1%\\nFull Power Rating Temperature: 85°C\\nLead Diameter: 0.5mm\\nOperating Temperature Range: -55°C to +125°C\\nResistance: 1Kohm\\nResistor Element Material: Variable Rotary Trimmer\"}' data-sheets-userformat='{\"2\":5035,\"3\":[null,0],\"4\":[null,2,16777215],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSpecifications:\u003cbr\u003eTrack Resistance: 100 K ohm\u003cbr\u003eResistance Tolerance: ± 5%\u003cbr\u003eTemperature Coefficient: ± 50 ppm\/°C\u003cbr\u003ePotentiometer Mounting: Through Hole\u003cbr\u003eAdjustment Type: Top\u003cbr\u003eContact Resistance Variation +: 1%\u003cbr\u003eFull Power Rating Temperature: 85°C\u003cbr\u003eLead Diameter: 0.5mm\u003cbr\u003eOperating Temperature Range: -55°C to +125°C\u003cbr\u003eResistance: 1 K ohm ,2k ohm ,5k ohm , 10k ohm , 20k ohm, 50k ohm , 100k ohm , 500k ohm, 1 meG ohm\u003cbr\u003eResistor Element Material: Variable Rotary Trimmer\u003c\/span\u003e\u003c\/p\u003e"}
₹ 240.00
₹ 79.00
Quick View
{"id":12094604563,"title":"Bread Board G-12","handle":"bread-board","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\"}' data-sheets-userformat='{\"2\":5033,\"3\":{\"1\":0},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\"}' data-sheets-userformat='{\"2\":5033,\"3\":{\"1\":0},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eBreadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\"}' data-sheets-userformat='{\"2\":5033,\"3\":{\"1\":0},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\"}' data-sheets-userformat='{\"2\":5033,\"3\":{\"1\":0},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eQuick circuit testing and mock-up\u003cbr\u003e840 Contact Points\u003cbr\u003eSuitable for most IC's, Standard 0.1\" Spacing\u003cbr\u003ePositive and Negative Power Rails on Top and Bottom\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-10-18T10:58:50+05:30","created_at":"2017-08-19T12:31:40+05:30","vendor":"TOMSON ELECTRONICS","type":"ROBOT ACCESSORIES","tags":["bread board","DEVELOPMENT\u0026 PROTOTYPING","Prototyping","TOMSON ELECTRONICS"],"price":7900,"price_min":7900,"price_max":7900,"available":true,"price_varies":false,"compare_at_price":24000,"compare_at_price_min":24000,"compare_at_price_max":24000,"compare_at_price_varies":false,"variants":[{"id":49700052947,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-BB-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Bread Board G-12","public_title":null,"options":["Default Title"],"price":7900,"weight":0,"compare_at_price":24000,"inventory_quantity":139,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BREAD_BOARD.png?v=1503408073"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BREAD_BOARD.png?v=1503408073","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\"}' data-sheets-userformat='{\"2\":5033,\"3\":{\"1\":0},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\"}' data-sheets-userformat='{\"2\":5033,\"3\":{\"1\":0},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eBreadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\"}' data-sheets-userformat='{\"2\":5033,\"3\":{\"1\":0},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Breadboard for quick and easy circuit testing and experimentation. Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. All pins are identifiable.\"}' data-sheets-userformat='{\"2\":5033,\"3\":{\"1\":0},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eQuick circuit testing and mock-up\u003cbr\u003e840 Contact Points\u003cbr\u003eSuitable for most IC's, Standard 0.1\" Spacing\u003cbr\u003ePositive and Negative Power Rails on Top and Bottom\u003c\/span\u003e\u003c\/p\u003e"}
₹ 160.00
Quick View
{"id":12580849043,"title":"Arduino Sensor Shield V5 - Expansion Board","handle":"arduino-sensor-shield-v5-expansion-board","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe latest Arduino Sensor Shield v 5.0 is now available in Tomson Electronics, Kochi, Ernakulam, Kerala, India. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology.newly added many kind of interface,for example,IIC interface、32 channels servo motor interface、bluetooth communication module interface、SD Card communication module interface and so on,more convenient.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou can easily connect with usual analog sensors by using this expansion board, such as ray sensor.if you support by this expansion board and corresponding circuit module,you only need to combine arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by program in arduino.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor beginners using Arduino, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program burned to the Arduino Uno controller from Tomson electronics reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The latest Arduino Controller Sensor Shield V5.0 is producted by ALSRobot. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology.newly added many kind of interface,for example,IIC interface、32 channels servo motor interface、bluetooth communication module interface、SD Card communication module interface and so on,more convenient.\\nSensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometersEach functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\\nYou can easily connect with usual analog sensors by using this expansion board, such as ray sensor.if you support by this expansion board and corresponding circuit module,you only need to combine arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by program in arduino.\\nFor Arduino beginners, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program downloaded to the Arduino Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eFeatures \u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The latest Arduino Controller Sensor Shield V5.0 is producted by ALSRobot. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology.newly added many kind of interface,for example,IIC interface、32 channels servo motor interface、bluetooth communication module interface、SD Card communication module interface and so on,more convenient.\\nSensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometersEach functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\\nYou can easily connect with usual analog sensors by using this expansion board, such as ray sensor.if you support by this expansion board and corresponding circuit module,you only need to combine arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by program in arduino.\\nFor Arduino beginners, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program downloaded to the Arduino Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003ePIN13 LED Pilot\u003cbr\u003eDigital IO Ports D0-D13\u003cbr\u003eAnalog IO Ports A0-A5\u003cbr\u003eReset Button\u003cbr\u003ePower In\u003cbr\u003ePower LED\u003cbr\u003eSD Card Interface\u003cbr\u003eUltrasonic Interface\u003cbr\u003eRS232 Interface(TTL)\u003cbr\u003eBluetooth Interface\u003cbr\u003eAPC220 Interface\u003cbr\u003eIIC Interface\u003cbr\u003e12864 LCD Parallel Interface\u003cbr\u003e12864 LCD Serial Interface\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-10-18T10:47:10+05:30","created_at":"2017-10-18T11:02:20+05:30","vendor":"TOMSON ELECTRONICS","type":"ARDUINO","tags":["Arduino","ARDUINO_SENSOR_SHIELD","Development Tools","DEVELOPMENT\u0026 PROTOTYPING"],"price":16000,"price_min":16000,"price_max":16000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":53002386515,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-21","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Sensor Shield V5 - Expansion Board","public_title":null,"options":["Default Title"],"price":16000,"weight":0,"compare_at_price":null,"inventory_quantity":12,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ARDUINO_SENSOR_SHIELD.png?v=1508304750"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ARDUINO_SENSOR_SHIELD.png?v=1508304750","options":["Title"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe latest Arduino Sensor Shield v 5.0 is now available in Tomson Electronics, Kochi, Ernakulam, Kerala, India. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology.newly added many kind of interface,for example,IIC interface、32 channels servo motor interface、bluetooth communication module interface、SD Card communication module interface and so on,more convenient.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eSensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometers Each functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eYou can easily connect with usual analog sensors by using this expansion board, such as ray sensor.if you support by this expansion board and corresponding circuit module,you only need to combine arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by program in arduino.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eFor beginners using Arduino, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program burned to the Arduino Uno controller from Tomson electronics reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The latest Arduino Controller Sensor Shield V5.0 is producted by ALSRobot. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology.newly added many kind of interface,for example,IIC interface、32 channels servo motor interface、bluetooth communication module interface、SD Card communication module interface and so on,more convenient.\\nSensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometersEach functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\\nYou can easily connect with usual analog sensors by using this expansion board, such as ray sensor.if you support by this expansion board and corresponding circuit module,you only need to combine arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by program in arduino.\\nFor Arduino beginners, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program downloaded to the Arduino Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eFeatures \u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The latest Arduino Controller Sensor Shield V5.0 is producted by ALSRobot. This Sensor Shield expansion board to retains the advantages of version V4.0 on the basis of stack design, PCB Immersion Gold processing technology.newly added many kind of interface,for example,IIC interface、32 channels servo motor interface、bluetooth communication module interface、SD Card communication module interface and so on,more convenient.\\nSensor Shield allows you to connect to various modules like sensors, servos, relays, buttons, potentiometersEach functional module has buckled port with VCC, GND and Output, which has corresponding port on the Sensor Shield, connected with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.\\nYou can easily connect with usual analog sensors by using this expansion board, such as ray sensor.if you support by this expansion board and corresponding circuit module,you only need to combine arduino and sensors module by using special cables, because concrete circuit details achieve by corresponding sensors module, so you only need to consider that how to read data coming from the sensor by program in arduino.\\nFor Arduino beginners, you do not have a headache for the cumbersome and complex circuit connection, the sensor extends the true sense of the board to simplify the circuit which can easily connect the commonly used sensor, a sensor requires only a common 3P sensor cable (regardless of digital cable and analog cable), after the completion of the circuit connection, the preparation of the corresponding Arduino program downloaded to the Arduino Duemilanove controller reads the sensor data, or receive wireless module to return data after computing the final easy to complete your own interactive works.\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003ePIN13 LED Pilot\u003cbr\u003eDigital IO Ports D0-D13\u003cbr\u003eAnalog IO Ports A0-A5\u003cbr\u003eReset Button\u003cbr\u003ePower In\u003cbr\u003ePower LED\u003cbr\u003eSD Card Interface\u003cbr\u003eUltrasonic Interface\u003cbr\u003eRS232 Interface(TTL)\u003cbr\u003eBluetooth Interface\u003cbr\u003eAPC220 Interface\u003cbr\u003eIIC Interface\u003cbr\u003e12864 LCD Parallel Interface\u003cbr\u003e12864 LCD Serial Interface\u003c\/span\u003e\u003c\/p\u003e"}
₹ 3,499.00
₹ 2,950.00
Quick View
{"id":12142561939,"title":"Raspberry Pi 3 - Model B","handle":"raspberry-pi-3-model-b-1-gb-ram","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:-\\n\\nThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.\\n\\nWhile maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\\n\\nAdditionally it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerful connected designs.\\n\\nSpecifications:-\\n\\nBroadcom BCM2387 chipset \\n1.2GHz Quad-Core ARM Cortex-A53\\n802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\\n1GB RAM\\n64 Bit CPU\\n4 x USB ports\\n4 pole Stereo output and Composite video port\\nFull size HDMI\\n10\/100 BaseT Ethernet socketbr\\nCSI camera port for connecting the Raspberry Pi camera\\nDSI display port for connecting the Raspberry Pi touch screen display\\nMicro SD port for loading your operating system and storing data\\nMicro USB power source\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:-\\n\\nThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.\\n\\nWhile maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\\n\\nAdditionally it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerful connected designs.\\n\\nSpecifications:-\\n\\nBroadcom BCM2387 chipset \\n1.2GHz Quad-Core ARM Cortex-A53\\n802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\\n1GB RAM\\n64 Bit CPU\\n4 x USB ports\\n4 pole Stereo output and Composite video port\\nFull size HDMI\\n10\/100 BaseT Ethernet socketbr\\nCSI camera port for connecting the Raspberry Pi camera\\nDSI display port for connecting the Raspberry Pi touch screen display\\nMicro SD port for loading your operating system and storing data\\nMicro USB power source\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B. While maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\u003cbr\u003eAdditionally, it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerfully connected designs.\u003cbr\u003e\u003cbr\u003eSpecifications:-\u003cbr\u003e\u003cbr\u003eBroadcom BCM2387 chipset \u003cbr\u003e1.2GHz Quad-Core ARM Cortex-A53\u003cbr\u003e802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\u003cbr\u003e1GB RAM\u003cbr\u003e64 Bit CPU\u003cbr\u003e4 x USB ports\u003cbr\u003e4 pole Stereo output and Composite video port\u003cbr\u003eFull size HDMI\u003cbr\u003e10\/100 BaseT Ethernet socket br\u003cbr\u003eCSI camera port for connecting the Raspberry Pi camera\u003cbr\u003eDSI display port for connecting the Raspberry Pi touch screen display\u003cbr\u003eMicro SD port for loading your operating system and storing data\u003cbr\u003eMicro USB power source\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:-\\n\\nThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.\\n\\nWhile maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\\n\\nAdditionally it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerful connected designs.\\n\\nSpecifications:-\\n\\nBroadcom BCM2387 chipset \\n1.2GHz Quad-Core ARM Cortex-A53\\n802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\\n1GB RAM\\n64 Bit CPU\\n4 x USB ports\\n4 pole Stereo output and Composite video port\\nFull size HDMI\\n10\/100 BaseT Ethernet socketbr\\nCSI camera port for connecting the Raspberry Pi camera\\nDSI display port for connecting the Raspberry Pi touch screen display\\nMicro SD port for loading your operating system and storing data\\nMicro USB power source\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:-\\n\\nThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.\\n\\nWhile maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\\n\\nAdditionally it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerful connected designs.\\n\\nSpecifications:-\\n\\nBroadcom BCM2387 chipset \\n1.2GHz Quad-Core ARM Cortex-A53\\n802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\\n1GB RAM\\n64 Bit CPU\\n4 x USB ports\\n4 pole Stereo output and Composite video port\\nFull size HDMI\\n10\/100 BaseT Ethernet socketbr\\nCSI camera port for connecting the Raspberry Pi camera\\nDSI display port for connecting the Raspberry Pi touch screen display\\nMicro SD port for loading your operating system and storing data\\nMicro USB power source\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eNow 10x Faster - Broadcom BCM2387 ARM Cortex-A53 Quad Core Processor powered Single Board Computer running at 1.2GHz!\u003cbr\u003e1GB RAM so you can now run bigger and more powerful applications\u003cbr\u003eFully HAT compatible\u003cbr\u003e40pin extended GPIO to enhance your “real world” projects.\u003cbr\u003eConnect a Raspberry Pi camera and touch screen display (each sold separately)\u003cbr\u003eStream and watch Hi-definition video output at 1080\u003cbr\u003eMicro SD slot for storing information and loading your operating systems.\u003cbr\u003e10\/100 BaseT Ethernet socket to quickly connect the Raspberry Pi to the Internet.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-25T10:36:32+05:30","created_at":"2017-08-25T10:46:20+05:30","vendor":"Raspberry Pi","type":"RASPBERRY PI","tags":["1_GB_RAM","Development Tools","DEVELOPMENT\u0026 PROTOTYPING","Pi_3_ Model_B","Raspberry Pi"],"price":295000,"price_min":295000,"price_max":295000,"available":true,"price_varies":false,"compare_at_price":349900,"compare_at_price_min":349900,"compare_at_price_max":349900,"compare_at_price_varies":false,"variants":[{"id":50163283155,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-RPI-02","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Raspberry Pi 3 - Model B","public_title":null,"options":["Default Title"],"price":295000,"weight":300,"compare_at_price":349900,"inventory_quantity":19,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Raspberry_pi3.png?v=1504070002","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Raspberry_pi3_packing.png?v=1504070002"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Raspberry_pi3.png?v=1504070002","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:-\\n\\nThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.\\n\\nWhile maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\\n\\nAdditionally it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerful connected designs.\\n\\nSpecifications:-\\n\\nBroadcom BCM2387 chipset \\n1.2GHz Quad-Core ARM Cortex-A53\\n802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\\n1GB RAM\\n64 Bit CPU\\n4 x USB ports\\n4 pole Stereo output and Composite video port\\nFull size HDMI\\n10\/100 BaseT Ethernet socketbr\\nCSI camera port for connecting the Raspberry Pi camera\\nDSI display port for connecting the Raspberry Pi touch screen display\\nMicro SD port for loading your operating system and storing data\\nMicro USB power source\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:-\\n\\nThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.\\n\\nWhile maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\\n\\nAdditionally it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerful connected designs.\\n\\nSpecifications:-\\n\\nBroadcom BCM2387 chipset \\n1.2GHz Quad-Core ARM Cortex-A53\\n802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\\n1GB RAM\\n64 Bit CPU\\n4 x USB ports\\n4 pole Stereo output and Composite video port\\nFull size HDMI\\n10\/100 BaseT Ethernet socketbr\\nCSI camera port for connecting the Raspberry Pi camera\\nDSI display port for connecting the Raspberry Pi touch screen display\\nMicro SD port for loading your operating system and storing data\\nMicro USB power source\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B. While maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\u003cbr\u003eAdditionally, it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerfully connected designs.\u003cbr\u003e\u003cbr\u003eSpecifications:-\u003cbr\u003e\u003cbr\u003eBroadcom BCM2387 chipset \u003cbr\u003e1.2GHz Quad-Core ARM Cortex-A53\u003cbr\u003e802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\u003cbr\u003e1GB RAM\u003cbr\u003e64 Bit CPU\u003cbr\u003e4 x USB ports\u003cbr\u003e4 pole Stereo output and Composite video port\u003cbr\u003eFull size HDMI\u003cbr\u003e10\/100 BaseT Ethernet socket br\u003cbr\u003eCSI camera port for connecting the Raspberry Pi camera\u003cbr\u003eDSI display port for connecting the Raspberry Pi touch screen display\u003cbr\u003eMicro SD port for loading your operating system and storing data\u003cbr\u003eMicro USB power source\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:-\\n\\nThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.\\n\\nWhile maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\\n\\nAdditionally it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerful connected designs.\\n\\nSpecifications:-\\n\\nBroadcom BCM2387 chipset \\n1.2GHz Quad-Core ARM Cortex-A53\\n802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\\n1GB RAM\\n64 Bit CPU\\n4 x USB ports\\n4 pole Stereo output and Composite video port\\nFull size HDMI\\n10\/100 BaseT Ethernet socketbr\\nCSI camera port for connecting the Raspberry Pi camera\\nDSI display port for connecting the Raspberry Pi touch screen display\\nMicro SD port for loading your operating system and storing data\\nMicro USB power source\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description:-\\n\\nThe Raspberry Pi 3 Model B is the third generation Raspberry Pi. This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B.\\n\\nWhile maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.\\n\\nAdditionally it adds wireless LAN \u0026amp; Bluetooth connectivity making it the ideal solution for powerful connected designs.\\n\\nSpecifications:-\\n\\nBroadcom BCM2387 chipset \\n1.2GHz Quad-Core ARM Cortex-A53\\n802.11 bgn Wireless LAN and Bluetooth 4.1 (Bluetooth Classic and LE)\\n1GB RAM\\n64 Bit CPU\\n4 x USB ports\\n4 pole Stereo output and Composite video port\\nFull size HDMI\\n10\/100 BaseT Ethernet socketbr\\nCSI camera port for connecting the Raspberry Pi camera\\nDSI display port for connecting the Raspberry Pi touch screen display\\nMicro SD port for loading your operating system and storing data\\nMicro USB power source\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eNow 10x Faster - Broadcom BCM2387 ARM Cortex-A53 Quad Core Processor powered Single Board Computer running at 1.2GHz!\u003cbr\u003e1GB RAM so you can now run bigger and more powerful applications\u003cbr\u003eFully HAT compatible\u003cbr\u003e40pin extended GPIO to enhance your “real world” projects.\u003cbr\u003eConnect a Raspberry Pi camera and touch screen display (each sold separately)\u003cbr\u003eStream and watch Hi-definition video output at 1080\u003cbr\u003eMicro SD slot for storing information and loading your operating systems.\u003cbr\u003e10\/100 BaseT Ethernet socket to quickly connect the Raspberry Pi to the Internet.\u003c\/span\u003e\u003c\/p\u003e"}
₹ 190.00
Quick View
{"id":12514234195,"title":"Attiny 85 Arduino Micro Usb","handle":"attiny-85-arduino-micro-usb","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eThe Micro Digi-spark,an Attiny 85 based micro controller development board\u003cbr\u003eProgramming port being a micro USB interface\u003cbr\u003eSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\u003cbr\u003eA whole host of shields to extend functionality\u003cbr\u003eWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\u003cbr\u003ePerfect for Arduino of extreme size.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eCompatible: Arduino IDE 1.0+(OSX\/Win\/Linux)\u003cbr\u003ePower : 5Vor7-15V(12V or less recommended, automatic selection)\u003cbr\u003eRegulator : 5V\/100mA\u003cbr\u003eI\/O Pins : 6(2 for USB when program actively communicates over USB, or 6 even when programming via USB)\u003cbr\u003eFlash Memory : 8K(about 6K after bootloader)\u003cbr\u003eInterface : I2C,SPI.\u003cbr\u003ePWM On 3 pins (more possible with Software PWM)\u003cbr\u003eADC On 4 pins.\u003cbr\u003eLED Power LED and Test\/Status LED\u003cbr\u003eOperating voltage - 3.3 V .\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-10-03T17:38:16+05:30","created_at":"2017-10-02T16:26:14+05:30","vendor":"TOMSON ELECTRONICS","type":"ARDUINO","tags":["Arduino","Development Tools","DEVELOPMENT\u0026 PROTOTYPING","TOMSON ELECTRONICS"],"price":19000,"price_min":19000,"price_max":19000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":52541404627,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-19","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Attiny 85 Arduino Micro Usb","public_title":null,"options":["Default Title"],"price":19000,"weight":0,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ATtiny_85_Arduino_USB_micro.png?v=1507032480"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ATtiny_85_Arduino_USB_micro.png?v=1507032480","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eThe Micro Digi-spark,an Attiny 85 based micro controller development board\u003cbr\u003eProgramming port being a micro USB interface\u003cbr\u003eSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\u003cbr\u003eA whole host of shields to extend functionality\u003cbr\u003eWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\u003cbr\u003ePerfect for Arduino of extreme size.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Micro Digispark,an Attiny85 based microcontroller development board\\nProgramming port being a micro USB interface\\nSimilar to the Arduino line, only cheaper, smaller, a bit less powerful\\nA whole host of shields to extend functionality\\nWith the ability to use the familiar Arduino IDE,Digispark pioneering a great way to jump into electronics\\nPerfect for Arduino of extreme size\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eCompatible: Arduino IDE 1.0+(OSX\/Win\/Linux)\u003cbr\u003ePower : 5Vor7-15V(12V or less recommended, automatic selection)\u003cbr\u003eRegulator : 5V\/100mA\u003cbr\u003eI\/O Pins : 6(2 for USB when program actively communicates over USB, or 6 even when programming via USB)\u003cbr\u003eFlash Memory : 8K(about 6K after bootloader)\u003cbr\u003eInterface : I2C,SPI.\u003cbr\u003ePWM On 3 pins (more possible with Software PWM)\u003cbr\u003eADC On 4 pins.\u003cbr\u003eLED Power LED and Test\/Status LED\u003cbr\u003eOperating voltage - 3.3 V .\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
₹ 212.40
Quick View
{"id":12514206803,"title":"Cnc shield v3","handle":"cnc-shield-v3","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) PWM Spindle and direction pins 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) PWM Spindle and direction pins 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eLatest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) PWM Spindle and direction pins 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Uses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-10-03T17:44:58+05:30","created_at":"2017-10-02T15:50:29+05:30","vendor":"TOMSON ELECTRONICS","type":"ARDUINO","tags":["Arduino","CNC_shield_v3","Development Tools","DEVELOPMENT\u0026 PROTOTYPING","TOMSON ELECTRONICS"],"price":21240,"price_min":21240,"price_max":21240,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":52541200083,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-17","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Cnc shield v3","public_title":null,"options":["Default Title"],"price":21240,"weight":250,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/CNC_Shield.png?v=1507032770"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/CNC_Shield.png?v=1507032770","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) PWM Spindle and direction pins 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Latest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) PWM Spindle and direction pins 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eLatest Arduino CNC Shield Version 3.10 GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) PWM Spindle and direction pins 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Uses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others)\u003c\/span\u003e\u003c\/p\u003e"}
₹ 30.00
₹ 25.00
Quick View
{"id":11467179475,"title":"1 Ohm - 1\/4 Watt Carbon Film Resistor (Pack Of 25)","handle":"1-ohm-1-4-watt-carbon-film-resistor","description":"\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThese are ¼th Watt, +\/- 5% tolerance CFR resistors. Commonly used in Electronic Circuits. These 1 Ohm resistors make excellent pull-ups, pull-downs, and current limiters. These resistors are manufactured using mechanised high vacuum carbonising plants thus it ensures a stable resistive film.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor BULK INQUIRIES 1000+ more contact us on info@tomson.in\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eROHS COMPLIANT\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-06-27T17:00:00+05:30","created_at":"2017-06-27T15:35:49+05:30","vendor":"WATTS Resistors","type":"RESISTORS","tags":["1E","Carbon Film Resistor","PASSIVES","Resistors","WATTS"],"price":2500,"price_min":2500,"price_max":2500,"available":true,"price_varies":false,"compare_at_price":3000,"compare_at_price_min":3000,"compare_at_price_max":3000,"compare_at_price_varies":false,"variants":[{"id":45250797139,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"A1-CFR-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"1 Ohm - 1\/4 Watt Carbon Film Resistor (Pack Of 25)","public_title":null,"options":["Default Title"],"price":2500,"weight":50,"compare_at_price":3000,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/resistor_0_0764ce3e-0b23-4d74-939d-b33771784df8.png?v=1503037227"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/resistor_0_0764ce3e-0b23-4d74-939d-b33771784df8.png?v=1503037227","options":["Title"],"content":"\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThese are ¼th Watt, +\/- 5% tolerance CFR resistors. Commonly used in Electronic Circuits. These 1 Ohm resistors make excellent pull-ups, pull-downs, and current limiters. These resistors are manufactured using mechanised high vacuum carbonising plants thus it ensures a stable resistive film.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor BULK INQUIRIES 1000+ more contact us on info@tomson.in\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eROHS COMPLIANT\u003c\/span\u003e\u003c\/p\u003e"}
₹ 12.00
Quick View
{"id":12108241363,"title":"Rotary Potentiometer - 10k Ohm","handle":"rotary-potentiometer-10k-ohm-1","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user! .This pot has a ¼\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\u003c\/span\u003e","published_at":"2017-08-21T12:19:19+05:30","created_at":"2017-08-21T12:25:25+05:30","vendor":"TOMSON ELECTRONICS","type":"POTENTIOMETERS \u0026 TRIMMERS","tags":["PASSIVES","Potentiometer","Potentiometers \u0026 Trimmers","TOMSON ELECTRONICS"],"price":1200,"price_min":1200,"price_max":1200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49818584275,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PP - PT - 09","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Rotary Potentiometer - 10k Ohm","public_title":null,"options":["Default Title"],"price":1200,"weight":100,"compare_at_price":null,"inventory_quantity":497,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT_6fd67276-dcac-4829-8815-816e277d0cf7.png?v=1503298557"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT_6fd67276-dcac-4829-8815-816e277d0cf7.png?v=1503298557","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user! .This pot has a ¼\" mounting diameter and has a 10K rotary taper. Check the datasheet for dimensional drawings.\u003c\/span\u003e"}
₹ 12.00
Quick View
{"id":12108187923,"title":"Rotary Potentiometer - 100K ohm","handle":"rotary-potentiometer-100k-ohm-1","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user! . This pot has a ¼\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\u003c\/span\u003e","published_at":"2017-08-21T12:07:36+05:30","created_at":"2017-08-21T12:18:06+05:30","vendor":"TOMSON ELECTRONICS","type":"POTENTIOMETERS \u0026 TRIMMERS","tags":["PASSIVES","Potentiometer","Potentiometers \u0026 Trimmers","TOMSON ELECTRONICS"],"price":1200,"price_min":1200,"price_max":1200,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49818015379,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PP - PT - 08","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Rotary Potentiometer - 100K ohm","public_title":null,"options":["Default Title"],"price":1200,"weight":100,"compare_at_price":null,"inventory_quantity":499,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT_d7355cb2-4ee0-440c-b96a-e8ba1525facc.png?v=1503298103"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/POT_d7355cb2-4ee0-440c-b96a-e8ba1525facc.png?v=1503298103","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user!This pot has a ¼\\\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eAn adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from 0 to VCC depending on the rotation of the pot. Hook the center pin to an ADC on a microcontroller and get a variable input from the user! . This pot has a ¼\" mounting diameter and has a 100K linear rotary. Check the datasheet for dimensional drawings.\u003c\/span\u003e"}
₹ 10.00
Quick View
{"id":12004368787,"title":"Ceramic Disc Capacitor 50 V 10 kpf ( Pack of 10 )","handle":"ceramic-disc-capacitor-high-voltage-10-kpf","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Ceramic Capacitors exhibit low parasitics and excellent EMI filtering capabilities. In a multilayer configuration, they display high capacitance values and various voltage ratings over a wide temperature range. Multiple styles are available such as MLCC chips, leaded capacitors, stacked capacitors and capacitors that utilize unique geometries\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Ceramic Capacitors exhibit low parasitics and excellent EMI filtering capabilities. In a multilayer configuration, they display high capacitance values and various voltage ratings over a wide temperature range. Multiple styles are available such as MLCC chips, leaded capacitors, stacked capacitors and capacitors that utilize unique geometries\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eCeramic Capacitors exhibit low parasitics and excellent EMI filtering capabilities. In a multi-layer configuration, they display high capacitance values and various voltage ratings over a wide temperature range. Multiple styles are available such as MLCC chips, leaded capacitors, stacked capacitors and capacitors that utilize unique geometries.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-09T15:32:00+05:30","created_at":"2017-08-09T15:59:35+05:30","vendor":"KELTRON","type":"CAPACITORS","tags":["Capacitors","Ceramic Disc","PASSIVES"],"price":1000,"price_min":1000,"price_max":1000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48710768979,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PA-CDC-02","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Ceramic Disc Capacitor 50 V 10 kpf ( Pack of 10 )","public_title":null,"options":["Default Title"],"price":1000,"weight":15,"compare_at_price":null,"inventory_quantity":999,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Untitled-1_3cc963e4-4842-4723-8812-4eb35201a927.png?v=1502274613"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Untitled-1_3cc963e4-4842-4723-8812-4eb35201a927.png?v=1502274613","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Ceramic Capacitors exhibit low parasitics and excellent EMI filtering capabilities. In a multilayer configuration, they display high capacitance values and various voltage ratings over a wide temperature range. Multiple styles are available such as MLCC chips, leaded capacitors, stacked capacitors and capacitors that utilize unique geometries\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Ceramic Capacitors exhibit low parasitics and excellent EMI filtering capabilities. In a multilayer configuration, they display high capacitance values and various voltage ratings over a wide temperature range. Multiple styles are available such as MLCC chips, leaded capacitors, stacked capacitors and capacitors that utilize unique geometries\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eCeramic Capacitors exhibit low parasitics and excellent EMI filtering capabilities. In a multi-layer configuration, they display high capacitance values and various voltage ratings over a wide temperature range. Multiple styles are available such as MLCC chips, leaded capacitors, stacked capacitors and capacitors that utilize unique geometries.\u003c\/span\u003e\u003c\/p\u003e"}
₹ 15.00
₹ 10.00
Quick View
{"id":12004163667,"title":"10 uf\/63 v Radial Electrolytic Capacitor","handle":"10uf-63v-radial-electrolytic-capacitor","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime\\n\\n\"}' data-sheets-userformat='{\"2\":15231,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":0,\"11\":4,\"12\":0,\"14\":[null,2,0],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime\\n\\n\"}' data-sheets-userformat='{\"2\":15231,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":0,\"11\":4,\"12\":0,\"14\":[null,2,0],\"15\":\"Questrial\",\"16\":10}'\u003eAn electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-09T15:12:19+05:30","created_at":"2017-08-09T15:15:52+05:30","vendor":"KELTRON","type":"CAPACITORS","tags":["10uF_63V","Capacitors","Electrolytic","KELTRON","PASSIVES"],"price":1000,"price_min":1000,"price_max":1000,"available":true,"price_varies":false,"compare_at_price":1500,"compare_at_price_min":1500,"compare_at_price_max":1500,"compare_at_price_varies":false,"variants":[{"id":48703272851,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"PA-CELE-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"10 uf\/63 v Radial Electrolytic Capacitor","public_title":null,"options":["Default Title"],"price":1000,"weight":0,"compare_at_price":1500,"inventory_quantity":998,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/10-63.png?v=1502271995"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/10-63.png?v=1502271995","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime\\n\\n\"}' data-sheets-userformat='{\"2\":15231,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":0,\"11\":4,\"12\":0,\"14\":[null,2,0],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"An electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime\\n\\n\"}' data-sheets-userformat='{\"2\":15231,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":0,\"11\":4,\"12\":0,\"14\":[null,2,0],\"15\":\"Questrial\",\"16\":10}'\u003eAn electrolytic capacitor is a type of capacitor that uses an electrolyte to achieve a larger capacitance than other capacitor types. An electrolyte is a liquid or gel containing a high concentration of ions. Almost all electrolytic capacitors are polarized, which means that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. The benefit of large capacitance in electrolytic capacitors comes with several drawbacks as well. Among these drawbacks are large leakage currents, value tolerances, equivalent series resistance and a limited lifetime\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e"}
₹ 320.00
₹ 250.00
Quick View
{"id":12003410515,"title":"Arduino Nano V3.0","handle":"arduino-nano-v3-0-compatible-mini-usb-development-boa","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\n\u003cg class=\"gr_ gr_13 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace\" id=\"13\" data-gr-id=\"13\"\u003etd\u003c\/g\u003e {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO but in a different package. It works with a Mini-B USB cable. Now availabe at Tomson Electronics, Kochi, Kerala, India with Arduino Bootloader pre installed in the devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDriver Software\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/CH34x_Install_Windows_v3_4.EXE?4640933587500734268\"\u003eCH34x Driver for Windows\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e\u003cbr\u003eOperating Voltage(logic level):5V\u003cbr\u003e8 analog inputs ports:A0 ~ A7\u003cbr\u003e14 Digital input \/ output ports:TX,RX,D2 ~ D13\u003cbr\u003e6 PWM ports:D3, D5, D6, D9, D10, D11\u003cbr\u003e1 pairs of TTL level serial transceiver ports RX \/ TX\u003cbr\u003eSupports WIN7\/VISTA\/MAC\/LINUX(32 bit \/64 bit system)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-09T11:55:47+05:30","created_at":"2017-08-09T11:59:01+05:30","vendor":"Arduino","type":"ARDUINO","tags":["Arduino","Arduino_Nano_V3.0","ROBOTICS","TOMSON ELECTRONICS"],"price":25000,"price_min":25000,"price_max":25000,"available":true,"price_varies":false,"compare_at_price":32000,"compare_at_price_min":32000,"compare_at_price_max":32000,"compare_at_price_varies":false,"variants":[{"id":48670056787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-08","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Nano V3.0","public_title":null,"options":["Default Title"],"price":25000,"weight":200,"compare_at_price":32000,"inventory_quantity":33,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/nano.png?v=1502361509"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/nano.png?v=1502361509","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\n\u003cg class=\"gr_ gr_13 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace\" id=\"13\" data-gr-id=\"13\"\u003etd\u003c\/g\u003e {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO but in a different package. It works with a Mini-B USB cable. Now availabe at Tomson Electronics, Kochi, Kerala, India with Arduino Bootloader pre installed in the devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDriver Software\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/CH34x_Install_Windows_v3_4.EXE?4640933587500734268\"\u003eCH34x Driver for Windows\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e\u003cbr\u003eOperating Voltage(logic level):5V\u003cbr\u003e8 analog inputs ports:A0 ~ A7\u003cbr\u003e14 Digital input \/ output ports:TX,RX,D2 ~ D13\u003cbr\u003e6 PWM ports:D3, D5, D6, D9, D10, D11\u003cbr\u003e1 pairs of TTL level serial transceiver ports RX \/ TX\u003cbr\u003eSupports WIN7\/VISTA\/MAC\/LINUX(32 bit \/64 bit system)\u003c\/span\u003e\u003c\/p\u003e"}
₹ 1,299.00
₹ 861.00
Quick View
{"id":12142924563,"title":"Arduino Mega 2560","handle":"arduino-mega-2560-clone","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe Arduino Mega is a micro-controller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\u003cbr\u003eThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eATmega2560 micro-controller\u003cbr\u003eInput voltage - 7-12 V\u003cbr\u003e54 Digital I\/O Pins (14 PWM outputs)\u003cbr\u003e16 Analog Inputs\u003cbr\u003e256k Flash Memory\u003cbr\u003e16Mhz Clock Speed\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-25T12:44:40+05:30","created_at":"2017-08-25T12:50:50+05:30","vendor":"TOMSON ELECTRONICS","type":"ARDUINO","tags":["Arduino","Arduino_Mega_2560","Mega_2560","ROBOTICS"],"price":86100,"price_min":86100,"price_max":86100,"available":true,"price_varies":false,"compare_at_price":129900,"compare_at_price_min":129900,"compare_at_price_max":129900,"compare_at_price_varies":false,"variants":[{"id":50170985939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-13","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Mega 2560","public_title":null,"options":["Default Title"],"price":86100,"weight":0,"compare_at_price":129900,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/mega_clone_new.png?v=1504068114"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/mega_clone_new.png?v=1504068114","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe Arduino Mega is a micro-controller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\u003cbr\u003eThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eATmega2560 micro-controller\u003cbr\u003eInput voltage - 7-12 V\u003cbr\u003e54 Digital I\/O Pins (14 PWM outputs)\u003cbr\u003e16 Analog Inputs\u003cbr\u003e256k Flash Memory\u003cbr\u003e16Mhz Clock Speed\u003c\/span\u003e\u003c\/p\u003e"}
₹ 599.00
₹ 460.00
Quick View
{"id":12142514131,"title":"Arduino Uno","handle":"arduino-uno-clone","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDriver Software\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/CH34x_Install_Windows_v3_4.EXE?4640933587500734268\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eCH34x Driver for Windows\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eOperating Voltage 5V\u003cbr\u003eInput Voltage (recommended) 7-12V\u003cbr\u003eInput Voltage (limits) 6-20V\u003cbr\u003eDigital I\/O Pins 14 (of which 6 provide PWM output)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-08-25T10:28:35+05:30","created_at":"2017-08-25T10:36:24+05:30","vendor":"Arduino","type":"ARDUINO","tags":["Arduino","Arduino Uno","ROBOTICS","TOMSON ELECTRONICS","Uno"],"price":46000,"price_min":46000,"price_max":46000,"available":true,"price_varies":false,"compare_at_price":59900,"compare_at_price_min":59900,"compare_at_price_max":59900,"compare_at_price_varies":false,"variants":[{"id":50162425619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-12","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Uno","public_title":null,"options":["Default Title"],"price":46000,"weight":50,"compare_at_price":59900,"inventory_quantity":117,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/uno_new.png?v=1512464022"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/uno_new.png?v=1512464022","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDriver Software\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/CH34x_Install_Windows_v3_4.EXE?4640933587500734268\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eCH34x Driver for Windows\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eOperating Voltage 5V\u003cbr\u003eInput Voltage (recommended) 7-12V\u003cbr\u003eInput Voltage (limits) 6-20V\u003cbr\u003eDigital I\/O Pins 14 (of which 6 provide PWM output)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
₹ 149.00
₹ 83.00
Quick View
{"id":12142729299,"title":"NRF 24 L 01","handle":"nrf-24-l-01","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eMaximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\u003cbr\u003eParticularly suitable for industrial control applications.\u003cbr\u003e125 Channels, Multi-point communication and frequency hopping to meet the communication needs\u003cbr\u003eBuilt-in hardware CRC error detection, Multipoint communication address control.\u003cbr\u003eLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\u003cbr\u003eBuilt-in 2.4Ghz antenna\u003cbr\u003eAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\u003cbr\u003eBuilt-in voltage regulator\u003cbr\u003eStandard DIP Pitch Interface for embedded applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTechnical Parameters\u003cbr\u003eInput Voltage: 1.9 ~ 3.6V\u003cbr\u003eSize: 34mm X 17mm X 1mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-08-25T11:33:56+05:30","created_at":"2017-08-25T11:43:01+05:30","vendor":"TOMSON ELECTRONICS","type":"RF","tags":["IOT \u0026 WIRELESS COMMUNICATION","NRF_24_L_01","RF","ROBOTICS","TOMSON ELECTRONICS"],"price":8300,"price_min":8300,"price_max":8300,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":50167574035,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RT-WIFI-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"NRF 24 L 01","public_title":null,"options":["Default Title"],"price":8300,"weight":100,"compare_at_price":14900,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/NRF_module.png?v=1503647289"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/NRF_module.png?v=1503647289","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eMaximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\u003cbr\u003eParticularly suitable for industrial control applications.\u003cbr\u003e125 Channels, Multi-point communication and frequency hopping to meet the communication needs\u003cbr\u003eBuilt-in hardware CRC error detection, Multipoint communication address control.\u003cbr\u003eLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\u003cbr\u003eBuilt-in 2.4Ghz antenna\u003cbr\u003eAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\u003cbr\u003eBuilt-in voltage regulator\u003cbr\u003eStandard DIP Pitch Interface for embedded applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTechnical Parameters\u003cbr\u003eInput Voltage: 1.9 ~ 3.6V\u003cbr\u003eSize: 34mm X 17mm X 1mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
₹ 15.00
Quick View
{"id":82356174867,"title":"Johnson Gear Motor L Clamp","handle":"johnson-gear-motor-l-clamp","description":"","published_at":"2017-12-08T12:12:41+05:30","created_at":"2017-12-06T13:54:32+05:30","vendor":"TOMSON ELECTRONICS","type":"ROBOT ACCESSORIES","tags":["Johnson motor","L_CLAMP","robot accessories","ROBOTICS","TOMSON ELECTRONICS"],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":711419592723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SS-DS-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Johnson Gear Motor L Clamp","public_title":null,"options":["Default Title"],"price":1500,"weight":0,"compare_at_price":null,"inventory_quantity":192,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/L_clamp.png?v=1512548681","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/L_clamp_for_johnson_motor.png?v=1512548686"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/L_clamp.png?v=1512548681","options":["Title"],"content":""}
Best Sellers
RF
NRF 24 L 01
₹ 149.00
₹ 83.00
Quick View
{"id":12142729299,"title":"NRF 24 L 01","handle":"nrf-24-l-01","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eMaximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\u003cbr\u003eParticularly suitable for industrial control applications.\u003cbr\u003e125 Channels, Multi-point communication and frequency hopping to meet the communication needs\u003cbr\u003eBuilt-in hardware CRC error detection, Multipoint communication address control.\u003cbr\u003eLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\u003cbr\u003eBuilt-in 2.4Ghz antenna\u003cbr\u003eAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\u003cbr\u003eBuilt-in voltage regulator\u003cbr\u003eStandard DIP Pitch Interface for embedded applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTechnical Parameters\u003cbr\u003eInput Voltage: 1.9 ~ 3.6V\u003cbr\u003eSize: 34mm X 17mm X 1mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-08-25T11:33:56+05:30","created_at":"2017-08-25T11:43:01+05:30","vendor":"TOMSON ELECTRONICS","type":"RF","tags":["IOT \u0026 WIRELESS COMMUNICATION","NRF_24_L_01","RF","ROBOTICS","TOMSON ELECTRONICS"],"price":8300,"price_min":8300,"price_max":8300,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":50167574035,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RT-WIFI-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"NRF 24 L 01","public_title":null,"options":["Default Title"],"price":8300,"weight":100,"compare_at_price":14900,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/NRF_module.png?v=1503647289"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/NRF_module.png?v=1503647289","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eMaximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\u003cbr\u003eParticularly suitable for industrial control applications.\u003cbr\u003e125 Channels, Multi-point communication and frequency hopping to meet the communication needs\u003cbr\u003eBuilt-in hardware CRC error detection, Multipoint communication address control.\u003cbr\u003eLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\u003cbr\u003eBuilt-in 2.4Ghz antenna\u003cbr\u003eAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\u003cbr\u003eBuilt-in voltage regulator\u003cbr\u003eStandard DIP Pitch Interface for embedded applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTechnical Parameters\u003cbr\u003eInput Voltage: 1.9 ~ 3.6V\u003cbr\u003eSize: 34mm X 17mm X 1mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
WiFi
WiFi Module - ESP 8266 12E
₹ 349.00
₹ 234.00
Quick View
{"id":12012990867,"title":"WiFi Module - ESP 8266 12E","handle":"wifi-module-esp8266-adapter","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" The ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\\nThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" The ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\\nThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any micro-controller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\u003cbr\u003eThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during run time. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" The ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\\nThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" The ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\\nThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003e802.11 b\/g\/n\u003cbr\u003eWi-Fi Direct (P2P), soft-AP\u003cbr\u003eIntegrated TCP\/IP protocol stack\u003cbr\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network\u003cbr\u003eIntegrated PLLs, regulators, DCXO and power management units\u003cbr\u003e+19.5dBm output power in 802.11b mode\u003cbr\u003ePower down leakage current of \u0026lt;10uA\u003cbr\u003e1MB Flash Memory\u003cbr\u003eIntegrated low power 32-bit CPU could be used as application processor\u003cbr\u003eSDIO 1.1 \/ 2.0, SPI, UART\u003cbr\u003eSTBC, 1×1 MIMO, 2×1 MIMO\u003cbr\u003eA-MPDU \u0026amp; A-MSDU aggregation \u0026amp; 0.4ms guard interval\u003cbr\u003eWake up and transmit packets in \u0026lt; 2ms\u003cbr\u003eStandby power consumption of \u0026lt; 1.0mW (DTIM3)\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","published_at":"2017-08-10T12:01:21+05:30","created_at":"2017-08-10T12:22:04+05:30","vendor":"TOMSON ELECTRONICS","type":"WiFi","tags":["IOT \u0026 WIRELESS COMMUNICATION","ROBOTICS","TOMSON ELECTRONICS","WIFI"],"price":23400,"price_min":23400,"price_max":23400,"available":true,"price_varies":false,"compare_at_price":34900,"compare_at_price_min":34900,"compare_at_price_max":34900,"compare_at_price_varies":false,"variants":[{"id":48804098707,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RT-WIFI-02","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"WiFi Module - ESP 8266 12E","public_title":null,"options":["Default Title"],"price":23400,"weight":100,"compare_at_price":34900,"inventory_quantity":57,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ESP_8266-12E.png?v=1502348197"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ESP_8266-12E.png?v=1502348197","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" The ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\\nThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" The ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\\nThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any micro-controller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\u003cbr\u003eThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during run time. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" The ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\\nThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\" The ESP8266 WiFi Module is a self contained SOC with integrated TCP\/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost effective board with a huge, and ever growing, community.\\nThis module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existance interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions, and requires no external RF part\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003e802.11 b\/g\/n\u003cbr\u003eWi-Fi Direct (P2P), soft-AP\u003cbr\u003eIntegrated TCP\/IP protocol stack\u003cbr\u003eIntegrated TR switch, balun, LNA, power amplifier and matching network\u003cbr\u003eIntegrated PLLs, regulators, DCXO and power management units\u003cbr\u003e+19.5dBm output power in 802.11b mode\u003cbr\u003ePower down leakage current of \u0026lt;10uA\u003cbr\u003e1MB Flash Memory\u003cbr\u003eIntegrated low power 32-bit CPU could be used as application processor\u003cbr\u003eSDIO 1.1 \/ 2.0, SPI, UART\u003cbr\u003eSTBC, 1×1 MIMO, 2×1 MIMO\u003cbr\u003eA-MPDU \u0026amp; A-MSDU aggregation \u0026amp; 0.4ms guard interval\u003cbr\u003eWake up and transmit packets in \u0026lt; 2ms\u003cbr\u003eStandby power consumption of \u0026lt; 1.0mW (DTIM3)\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e"}
ZIG BEE
ZigBee Adapter Board With Usb Interface
₹ 450.00
₹ 390.00
Quick View
{"id":12012809235,"title":"ZigBee Adapter Board With Usb Interface","handle":"rs232-bluetooth-zigbee-wifi-shield","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description Pin Description: 1 Power: When there is no Arduino, you can use the adapter power supply (5V) 2 RS232: connected to PC serial port or USB to serial port;..\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"This is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach USB cable, and you will have direct access to the serial and programming pins on the XBee unit. The board is powered by the USB cable.XBee modules and USB cable are sold separately. \"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThis is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach USB cable, and you will have direct access to the serial and programming pins on the XBee unit. The board is powered by the USB cable. XBee modules and USB cable are sold separately. \u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description Pin Description: 1 Power: When there is no Arduino, you can use the adapter power supply (5V) 2 RS232: connected to PC serial port or USB to serial port;..\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Features: \\n\\n• USB Connectivity \\n\\n• USB Powered. \\n\\n• Small footprint. \\n\\n• All XBee pins broken out. \\n\\n• Reset button \\n\\n• Onboard 3.3V regulated supply. \\n\\n• Small footprint. \"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e• USB Connectivity \u003cbr\u003e\u003cbr\u003e• USB Powered. \u003cbr\u003e\u003cbr\u003e• Small footprint. \u003cbr\u003e\u003cbr\u003e• All XBee pins broken out. \u003cbr\u003e\u003cbr\u003e• Reset button \u003cbr\u003e\u003cbr\u003e• Onboard 3.3V regulated supply. \u003cbr\u003e\u003cbr\u003e• Small footprint. \u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-10T11:45:05+05:30","created_at":"2017-08-10T11:50:59+05:30","vendor":"TOMSON ELECTRONICS","type":"ZIG BEE","tags":["IOT \u0026 WIRELESS COMMUNICATION","ROBOTICS","Zig Bee"],"price":39000,"price_min":39000,"price_max":39000,"available":true,"price_varies":false,"compare_at_price":45000,"compare_at_price_min":45000,"compare_at_price_max":45000,"compare_at_price_varies":false,"variants":[{"id":48801844307,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RB-XBEE-02","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ZigBee Adapter Board With Usb Interface","public_title":null,"options":["Default Title"],"price":39000,"weight":200,"compare_at_price":45000,"inventory_quantity":38,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Zigbee_base_USB.png?v=1502951508"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Zigbee_base_USB.png?v=1502951508","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description Pin Description: 1 Power: When there is no Arduino, you can use the adapter power supply (5V) 2 RS232: connected to PC serial port or USB to serial port;..\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"This is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach USB cable, and you will have direct access to the serial and programming pins on the XBee unit. The board is powered by the USB cable.XBee modules and USB cable are sold separately. \"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThis is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach USB cable, and you will have direct access to the serial and programming pins on the XBee unit. The board is powered by the USB cable. XBee modules and USB cable are sold separately. \u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description Pin Description: 1 Power: When there is no Arduino, you can use the adapter power supply (5V) 2 RS232: connected to PC serial port or USB to serial port;..\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Features: \\n\\n• USB Connectivity \\n\\n• USB Powered. \\n\\n• Small footprint. \\n\\n• All XBee pins broken out. \\n\\n• Reset button \\n\\n• Onboard 3.3V regulated supply. \\n\\n• Small footprint. \"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e• USB Connectivity \u003cbr\u003e\u003cbr\u003e• USB Powered. \u003cbr\u003e\u003cbr\u003e• Small footprint. \u003cbr\u003e\u003cbr\u003e• All XBee pins broken out. \u003cbr\u003e\u003cbr\u003e• Reset button \u003cbr\u003e\u003cbr\u003e• Onboard 3.3V regulated supply. \u003cbr\u003e\u003cbr\u003e• Small footprint. \u003c\/span\u003e\u003c\/p\u003e"}
ZIG BEE
XBee Module S2 C 802.15.4 2mW With Wire Antenna
₹ 1,299.00
₹ 1,190.00
Quick View
{"id":12012698771,"title":"XBee Module S2 C 802.15.4 2mW With Wire Antenna","handle":"xbee-module-s2c-802-15-4-2mw-with-wire-antenna","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eXBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multi-point\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSimple, out-of-the-box RF communications, no configuration needed\u003cbr\u003ePoint-to-multipoint network topology\u003cbr\u003e2.4 GHz for worldwide deployment\u003cbr\u003eCommon XBee footprint for a variety of RF modules\u003cbr\u003eIndustry leading sleep current of sub 1uA\u003cbr\u003eFirmware upgrades via UART, SPI or over the air\u003cbr\u003eMigratable to DigiMesh and ZigBee PRO protocols and vice-versa\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","published_at":"2017-08-10T11:23:52+05:30","created_at":"2017-08-10T11:35:12+05:30","vendor":"TOMSON ELECTRONICS","type":"ZIG BEE","tags":["IOT \u0026 WIRELESS COMMUNICATION","ROBOTICS","Zig Bee"],"price":119000,"price_min":119000,"price_max":119000,"available":true,"price_varies":false,"compare_at_price":129900,"compare_at_price_min":129900,"compare_at_price_max":129900,"compare_at_price_varies":false,"variants":[{"id":48800721427,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RB-XBEE-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"XBee Module S2 C 802.15.4 2mW With Wire Antenna","public_title":null,"options":["Default Title"],"price":119000,"weight":100,"compare_at_price":129900,"inventory_quantity":9,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ZIGBEE_BACK.png?v=1502345119","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ZIGBEE.png?v=1502345121"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ZIGBEE_BACK.png?v=1502345119","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eXBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multi-point\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"XBee 802.15.4 RF modules are ideal for applications requiring low latency and predictable communication timing. Providing quick, robust communication in point-to-point, peer-to-peer, and multipoint\/star configurations, XBee 802.15.4 products enable robust end-point connectivity with ease. Whether deployed as a pure cable replacement for simple serial XBEE® S2C 802.15.4 RF MODULES communication, or as part of a more complex hub-and-spoke network of sensors, XBee 802.15.4 RF modules maximize performance and ease of development.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eSimple, out-of-the-box RF communications, no configuration needed\u003cbr\u003ePoint-to-multipoint network topology\u003cbr\u003e2.4 GHz for worldwide deployment\u003cbr\u003eCommon XBee footprint for a variety of RF modules\u003cbr\u003eIndustry leading sleep current of sub 1uA\u003cbr\u003eFirmware upgrades via UART, SPI or over the air\u003cbr\u003eMigratable to DigiMesh and ZigBee PRO protocols and vice-versa\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e"}
GSM/GPRS
SIM 800 GSM / GPRS
Quick View
{"id":81431363603,"title":"SIM 800 GSM \/ GPRS","handle":"sim800-gsm-gprs","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Main Difference Between RS232 to RS485 Converters units are that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \\n\\nThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \\n\\n\"}' data-sheets-userformat='{\"2\":829,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0}'\u003eDescription \u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Main Difference Between RS232 to RS485 Converters units are that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \\n\\nThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \\n\\n\"}' data-sheets-userformat='{\"2\":829,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0}'\u003eThe Main Difference Between RS232 to RS485 Converters units is that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \u003cbr\u003e\u003cbr\u003eThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Main Difference Between RS232 to RS485 Converters units are that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \\n\\nThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \\n\\n\"}' data-sheets-userformat='{\"2\":829,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Main Difference Between RS232 to RS485 Converters units are that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \\n\\nThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \\n\\n\"}' data-sheets-userformat='{\"2\":829,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0}'\u003e1)Serial Features: Interface is compatible with EIA \/ TIA RS - 232C , RS - 485 standard \u003cbr\u003e2) Electrical Interface: RS -232C end D89 pass port, RS - 485 terminal D89 needle -shaped connector, with the terminal ( three wires) \u003cbr\u003e3) Work: asynchronous half-duplex \u003cbr\u003e4) Transmission media: wire, twisted pair or shielded cable \u003cbr\u003e5) Transfer rate: 300 - 115200BPS \u003cbr\u003e6) Transmission distance : 5m ( RS -232 terminal), 1200m (RS - 485 side ) \u003cbr\u003e7) Communication protocols: Transparent \u003cbr\u003e8) Working environment: -10 - 85 degrees Celsius;relative humidity: 5% - 95% \u003cbr\u003e9) Signal \u003cbr\u003e- RS-232 : the TXD , RXD , RTS, the CTS, DTR, DSR, DCD, GND; \u003cbr\u003e- RS-485 : Date+, Date-, GND\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-12-05T13:26:55+05:30","created_at":"2017-12-05T13:31:40+05:30","vendor":"TOMSON ELECTRONICS","type":"GSM\/GPRS","tags":["GSM\/GPRS","IOT \u0026 WIRELESS COMMUNICATION","ROBOTICS","SIM800"],"price":95000,"price_min":95000,"price_max":95000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":699413659667,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RB-GS-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"SIM 800 GSM \/ GPRS","public_title":null,"options":["Default Title"],"price":95000,"weight":450,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/sim_800.png?v=1512460910","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/sim_800_2.png?v=1512460916"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/sim_800.png?v=1512460910","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Main Difference Between RS232 to RS485 Converters units are that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \\n\\nThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \\n\\n\"}' data-sheets-userformat='{\"2\":829,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0}'\u003eDescription \u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Main Difference Between RS232 to RS485 Converters units are that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \\n\\nThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \\n\\n\"}' data-sheets-userformat='{\"2\":829,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0}'\u003eThe Main Difference Between RS232 to RS485 Converters units is that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \u003cbr\u003e\u003cbr\u003eThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Main Difference Between RS232 to RS485 Converters units are that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \\n\\nThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \\n\\n\"}' data-sheets-userformat='{\"2\":829,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Main Difference Between RS232 to RS485 Converters units are that some of them can have a DB9 connector whereas others have a terminal screw header or RJ11 connector, some are isolated some are not, some has more than one RS485 port, some has LED lights for indicating RX\/TX data flow, some are port-powered and some needs an external power supply, some are industrial strength, some are consumer products. \\n\\nThe RS232 to RS485 itself, regardless of what model you choose, is simply a device which can convert standard RS232 data signals into RS485 signals and vice versa. Most RS232 to RS485 converters can convert data in both directions, from RS232 to RS485 and from RS485 to RS232, this is also called a bi-directional converter. \\n\\n\"}' data-sheets-userformat='{\"2\":829,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0}'\u003e1)Serial Features: Interface is compatible with EIA \/ TIA RS - 232C , RS - 485 standard \u003cbr\u003e2) Electrical Interface: RS -232C end D89 pass port, RS - 485 terminal D89 needle -shaped connector, with the terminal ( three wires) \u003cbr\u003e3) Work: asynchronous half-duplex \u003cbr\u003e4) Transmission media: wire, twisted pair or shielded cable \u003cbr\u003e5) Transfer rate: 300 - 115200BPS \u003cbr\u003e6) Transmission distance : 5m ( RS -232 terminal), 1200m (RS - 485 side ) \u003cbr\u003e7) Communication protocols: Transparent \u003cbr\u003e8) Working environment: -10 - 85 degrees Celsius;relative humidity: 5% - 95% \u003cbr\u003e9) Signal \u003cbr\u003e- RS-232 : the TXD , RXD , RTS, the CTS, DTR, DSR, DCD, GND; \u003cbr\u003e- RS-485 : Date+, Date-, GND\u003c\/span\u003e\u003c\/p\u003e"}
RF
13.56 Khz Rfid Key fob Key chain
Quick View
{"id":12514153491,"title":"13.56 Khz Rfid Key fob Key chain","handle":"rees52-13-56khz-rfid-sensor-proximity-ic-key-tag-keyfob-keychain-card","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords\\nOperating Frequency: 13.56 MHz;\\nCommunication speed: 106K Boud;\\nRead and write distance: 2.5 ~ 10cm;\\nRead and write time: 1 ~ 2ms;\\nOperating Temperature: -20c ~ 85c ;\\nEndurance:\u0026gt; 100,000 times;\\nThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\\nsmall and exquisite appearance, durable, not easy to fade.\\nthe product is waterproof, shockproof, anti corrosion.\\nCan be hunged on a key ring, easy to carry\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords\\nOperating Frequency: 13.56 MHz;\\nCommunication speed: 106K Boud;\\nRead and write distance: 2.5 ~ 10cm;\\nRead and write time: 1 ~ 2ms;\\nOperating Temperature: -20c ~ 85c ;\\nEndurance:\u0026gt; 100,000 times;\\nThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\\nsmall and exquisite appearance, durable, not easy to fade.\\nthe product is waterproof, shockproof, anti corrosion.\\nCan be hunged on a key ring, easy to carry\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eStorage capacity: 8 K bit, 16 partitions, each partition with 2 group passwords\u003cbr\u003eOperating Frequency: 13.56 MHz;\u003cbr\u003eCommunication speed: 106K Boud;\u003cbr\u003eRead and write distance: 2.5 ~ 10cm;\u003cbr\u003eRead and write time: 1 ~ 2ms;\u003cbr\u003eOperating Temperature: -20c ~ 85c ;\u003cbr\u003eEndurance:\u0026gt; 100,000 times;\u003cbr\u003eThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\u003cbr\u003esmall and exquisite appearance, durable, not easy to fade.\u003cbr\u003ethe product is waterproof, shockproof, anti corrosion.\u003cbr\u003eCan be hanged on a key ring, easy to carry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords\\nOperating Frequency: 13.56 MHz;\\nCommunication speed: 106K Boud;\\nRead and write distance: 2.5 ~ 10cm;\\nRead and write time: 1 ~ 2ms;\\nOperating Temperature: -20c ~ 85c ;\\nEndurance:\u0026gt; 100,000 times;\\nThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\\nsmall and exquisite appearance, durable, not easy to fade.\\nthe product is waterproof, shockproof, anti corrosion.\\nCan be hunged on a key ring, easy to carry\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eApplications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords\\nOperating Frequency: 13.56 MHz;\\nCommunication speed: 106K Boud;\\nRead and write distance: 2.5 ~ 10cm;\\nRead and write time: 1 ~ 2ms;\\nOperating Temperature: -20c ~ 85c ;\\nEndurance:\u0026gt; 100,000 times;\\nThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\\nsmall and exquisite appearance, durable, not easy to fade.\\nthe product is waterproof, shockproof, anti corrosion.\\nCan be hunged on a key ring, easy to carry\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003e\u003cbr\u003eAccess control\u003cbr\u003ePublic transportation\u003cbr\u003eparking\u003cbr\u003eIdentity authentication\u003cbr\u003eAttendance management\u003cbr\u003eTicket\u003cbr\u003eCard payment\u003cbr\u003eProduct identification\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-10-03T18:21:35+05:30","created_at":"2017-10-02T15:05:45+05:30","vendor":"TOMSON ELECTRONICS","type":"RF","tags":["13.56 Khz Rfid Key fob Key chain","IOT \u0026 WIRELESS COMMUNICATION","RF","TOMSON ELECTRONICS"],"price":2950,"price_min":2950,"price_max":2950,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":52539378707,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-15","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"13.56 Khz Rfid Key fob Key chain","public_title":null,"options":["Default Title"],"price":2950,"weight":50,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/KEYFOB_13.png?v=1507035081"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/KEYFOB_13.png?v=1507035081","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords\\nOperating Frequency: 13.56 MHz;\\nCommunication speed: 106K Boud;\\nRead and write distance: 2.5 ~ 10cm;\\nRead and write time: 1 ~ 2ms;\\nOperating Temperature: -20c ~ 85c ;\\nEndurance:\u0026gt; 100,000 times;\\nThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\\nsmall and exquisite appearance, durable, not easy to fade.\\nthe product is waterproof, shockproof, anti corrosion.\\nCan be hunged on a key ring, easy to carry\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords\\nOperating Frequency: 13.56 MHz;\\nCommunication speed: 106K Boud;\\nRead and write distance: 2.5 ~ 10cm;\\nRead and write time: 1 ~ 2ms;\\nOperating Temperature: -20c ~ 85c ;\\nEndurance:\u0026gt; 100,000 times;\\nThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\\nsmall and exquisite appearance, durable, not easy to fade.\\nthe product is waterproof, shockproof, anti corrosion.\\nCan be hunged on a key ring, easy to carry\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eStorage capacity: 8 K bit, 16 partitions, each partition with 2 group passwords\u003cbr\u003eOperating Frequency: 13.56 MHz;\u003cbr\u003eCommunication speed: 106K Boud;\u003cbr\u003eRead and write distance: 2.5 ~ 10cm;\u003cbr\u003eRead and write time: 1 ~ 2ms;\u003cbr\u003eOperating Temperature: -20c ~ 85c ;\u003cbr\u003eEndurance:\u0026gt; 100,000 times;\u003cbr\u003eThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\u003cbr\u003esmall and exquisite appearance, durable, not easy to fade.\u003cbr\u003ethe product is waterproof, shockproof, anti corrosion.\u003cbr\u003eCan be hanged on a key ring, easy to carry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords\\nOperating Frequency: 13.56 MHz;\\nCommunication speed: 106K Boud;\\nRead and write distance: 2.5 ~ 10cm;\\nRead and write time: 1 ~ 2ms;\\nOperating Temperature: -20c ~ 85c ;\\nEndurance:\u0026gt; 100,000 times;\\nThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\\nsmall and exquisite appearance, durable, not easy to fade.\\nthe product is waterproof, shockproof, anti corrosion.\\nCan be hunged on a key ring, easy to carry\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003eApplications\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Storage capacity: 8Kbit, 16 partitions, each partition with 2 grounp passwords\\nOperating Frequency: 13.56 MHz;\\nCommunication speed: 106K Boud;\\nRead and write distance: 2.5 ~ 10cm;\\nRead and write time: 1 ~ 2ms;\\nOperating Temperature: -20c ~ 85c ;\\nEndurance:\u0026gt; 100,000 times;\\nThe shell is made by excellent anti-corrosion and high temperature resistant material.RF chip is sealed in,filling the epoxy resin,and use ultrasonic to weld.\\nsmall and exquisite appearance, durable, not easy to fade.\\nthe product is waterproof, shockproof, anti corrosion.\\nCan be hunged on a key ring, easy to carry\"}' data-sheets-userformat='{\"2\":957,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0}'\u003e\u003cbr\u003eAccess control\u003cbr\u003ePublic transportation\u003cbr\u003eparking\u003cbr\u003eIdentity authentication\u003cbr\u003eAttendance management\u003cbr\u003eTicket\u003cbr\u003eCard payment\u003cbr\u003eProduct identification\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
BO MOTOR
60 Rpm Rectangle Single Shaft Plastic Gear Bo Motor
₹ 120.00
Quick View
{"id":12134880403,"title":"60 Rpm Rectangle Single Shaft Plastic Gear Bo Motor","handle":"60-rpm-rectangle-single-shaft-plastic-gear-bo-motor","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eA DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically com-mutated electric motor powered from direct current (DC).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Gear materials: plastic.\\nMotor types: permanent-magnet.\\nBrush-type: Brush.\\nUncommitted motors: Homopolar motors.\\nMagnet types: ferrite magnets.\\nTorque multiplication: Generate a large force at a low speed.\\nCost effectiveness of the injection-molding process.\\nElimination of machining operations.\\nLow density: lightweight, low inertia.\\nUniformity of parts.\\nCapability to absorb shock and vibration as a result of elastic compliance.\\nAbility to operate with minimum or no lubrication, due to inherent lubricity.\\nRelatively low coefficient of friction.\\nCorrosion-resistance; elimination of plating, or protective coatings.\\nQuietness of operation.\\nTolerances often less critical than for metal gears, due in part to their greater resilience.\\nConsistency with trend to greater use of plastic housings and other components.\\nApplications of 300 RPM Rectangle Single Shaft Plastic Gea\"}' data-sheets-userformat='{\"2\":15357,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":0,\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,0],\"15\":\"Questrial\",\"16\":10}'\u003eGear materials: plastic.\u003cbr\u003eMotor types: permanent-magnet.\u003cbr\u003eBrush-type: Brush.\u003cbr\u003eUncommitted motors: Homopolar motors.\u003cbr\u003eMagnet types: ferrite magnets.\u003cbr\u003eTorque multiplication: Generate a large force at a low speed.\u003cbr\u003eCost effectiveness of the injection-molding process.\u003cbr\u003eElimination of machining operations.\u003cbr\u003eLow density: lightweight, low inertia.\u003cbr\u003eUniformity of parts.\u003cbr\u003eCapability to absorb shock and vibration as a result of elastic compliance.\u003cbr\u003eAbility to operate with minimum or no lubrication, due to inherent lubricity.\u003cbr\u003eRelatively low coefficient of friction.\u003cbr\u003eCorrosion-resistance; elimination of plating, or protective coatings.\u003cbr\u003eQuietness of operation.\u003cbr\u003eTolerances often less critical than for metal gears, due in part to their greater resilience.\u003cbr\u003eConsistency with trend to greater use of plastic housings and other components.\u003cbr\u003eApplications of 150 RPM Rectangle Single Shaft Plastic Gear.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-24T11:36:21+05:30","created_at":"2017-08-24T11:39:25+05:30","vendor":"TOMSON ELECTRONICS","type":"BO MOTOR","tags":["Bo Motor","BO MOTOR_60RPM","ELECTROMECHANICAL","Motors","TOMSON ELECTRONICS"],"price":12000,"price_min":12000,"price_max":12000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":50095196883,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RB-RA-32","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"60 Rpm Rectangle Single Shaft Plastic Gear Bo Motor","public_title":null,"options":["Default Title"],"price":12000,"weight":400,"compare_at_price":null,"inventory_quantity":26,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BO_MOTOR_1_c6173895-ee3f-4475-9a64-a2ac128e54e2.png?v=1503554977","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BO_MOTOR_2_d23710b8-2983-4426-9a93-ae8b8e02bb9a.png?v=1503554978"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BO_MOTOR_1_c6173895-ee3f-4475-9a64-a2ac128e54e2.png?v=1503554977","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eA DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically com-mutated electric motor powered from direct current (DC).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Gear materials: plastic.\\nMotor types: permanent-magnet.\\nBrush-type: Brush.\\nUncommitted motors: Homopolar motors.\\nMagnet types: ferrite magnets.\\nTorque multiplication: Generate a large force at a low speed.\\nCost effectiveness of the injection-molding process.\\nElimination of machining operations.\\nLow density: lightweight, low inertia.\\nUniformity of parts.\\nCapability to absorb shock and vibration as a result of elastic compliance.\\nAbility to operate with minimum or no lubrication, due to inherent lubricity.\\nRelatively low coefficient of friction.\\nCorrosion-resistance; elimination of plating, or protective coatings.\\nQuietness of operation.\\nTolerances often less critical than for metal gears, due in part to their greater resilience.\\nConsistency with trend to greater use of plastic housings and other components.\\nApplications of 300 RPM Rectangle Single Shaft Plastic Gea\"}' data-sheets-userformat='{\"2\":15357,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":0,\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,0],\"15\":\"Questrial\",\"16\":10}'\u003eGear materials: plastic.\u003cbr\u003eMotor types: permanent-magnet.\u003cbr\u003eBrush-type: Brush.\u003cbr\u003eUncommitted motors: Homopolar motors.\u003cbr\u003eMagnet types: ferrite magnets.\u003cbr\u003eTorque multiplication: Generate a large force at a low speed.\u003cbr\u003eCost effectiveness of the injection-molding process.\u003cbr\u003eElimination of machining operations.\u003cbr\u003eLow density: lightweight, low inertia.\u003cbr\u003eUniformity of parts.\u003cbr\u003eCapability to absorb shock and vibration as a result of elastic compliance.\u003cbr\u003eAbility to operate with minimum or no lubrication, due to inherent lubricity.\u003cbr\u003eRelatively low coefficient of friction.\u003cbr\u003eCorrosion-resistance; elimination of plating, or protective coatings.\u003cbr\u003eQuietness of operation.\u003cbr\u003eTolerances often less critical than for metal gears, due in part to their greater resilience.\u003cbr\u003eConsistency with trend to greater use of plastic housings and other components.\u003cbr\u003eApplications of 150 RPM Rectangle Single Shaft Plastic Gear.\u003c\/span\u003e\u003c\/p\u003e"}
BO MOTOR
150 Rpm Rectangle Single Shaft Plastic Gear Bo Motor
Quick View
{"id":12134847571,"title":"150 Rpm Rectangle Single Shaft Plastic Gear Bo Motor","handle":"150-rpm-rectangle-single-shaft-plastic-gear-bo-motor","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eA DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically com-mutated electric motor powered from direct current (DC).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Gear materials: plastic.\\nMotor types: permanent-magnet.\\nBrush-type: Brush.\\nUncommitted motors: Homopolar motors.\\nMagnet types: ferrite magnets.\\nTorque multiplication: Generate a large force at a low speed.\\nCost effectiveness of the injection-molding process.\\nElimination of machining operations.\\nLow density: lightweight, low inertia.\\nUniformity of parts.\\nCapability to absorb shock and vibration as a result of elastic compliance.\\nAbility to operate with minimum or no lubrication, due to inherent lubricity.\\nRelatively low coefficient of friction.\\nCorrosion-resistance; elimination of plating, or protective coatings.\\nQuietness of operation.\\nTolerances often less critical than for metal gears, due in part to their greater resilience.\\nConsistency with trend to greater use of plastic housings and other components.\\nApplications of 300 RPM Rectangle Single Shaft Plastic Gea\"}' data-sheets-userformat='{\"2\":15357,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":0,\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,0],\"15\":\"Questrial\",\"16\":10}'\u003eGear materials: plastic.\u003cbr\u003eMotor types: permanent-magnet.\u003cbr\u003eBrush-type: Brush.\u003cbr\u003eUncommitted motors: Homopolar motors.\u003cbr\u003eMagnet types: ferrite magnets.\u003cbr\u003eTorque multiplication: Generate a large force at a low speed.\u003cbr\u003eCost effectiveness of the injection-molding process.\u003cbr\u003eElimination of machining operations.\u003cbr\u003eLow density: lightweight, low inertia.\u003cbr\u003eUniformity of parts.\u003cbr\u003eCapability to absorb shock and vibration as a result of elastic compliance.\u003cbr\u003eAbility to operate with minimum or no lubrication, due to inherent lubricity.\u003cbr\u003eRelatively low coefficient of friction.\u003cbr\u003eCorrosion-resistance; elimination of plating, or protective coatings.\u003cbr\u003eQuietness of operation.\u003cbr\u003eTolerances often less critical than for metal gears, due in part to their greater resilience.\u003cbr\u003eConsistency with trend to greater use of plastic housings and other components.\u003cbr\u003eApplications of 150 RPM Rectangle Single Shaft Plastic Gear.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-24T11:33:16+05:30","created_at":"2017-08-24T11:35:41+05:30","vendor":"TOMSON ELECTRONICS","type":"BO MOTOR","tags":["150_RPM","Bo Motor","BO MOTOR_150RPM","ELECTROMECHANICAL","Motors","TOMSON ELECTRONICS"],"price":12000,"price_min":12000,"price_max":12000,"available":false,"price_varies":false,"compare_at_price":15000,"compare_at_price_min":15000,"compare_at_price_max":15000,"compare_at_price_varies":false,"variants":[{"id":50094886227,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RB-RA-31","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"150 Rpm Rectangle Single Shaft Plastic Gear Bo Motor","public_title":null,"options":["Default Title"],"price":12000,"weight":30,"compare_at_price":15000,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BO_MOTOR_1_ff43b07a-7486-4f1e-a090-16e5c2e51b3c.png?v=1503554744","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BO_MOTOR_2_004bf125-e6d3-49bb-a3af-9f5381a71037.png?v=1503554746"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BO_MOTOR_1_ff43b07a-7486-4f1e-a090-16e5c2e51b3c.png?v=1503554744","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"A DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically commutated electric motor powered from direct current (DC)\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eA DC Geared DC motor is a simple DC motor with gear box attached to the shaft of the motor which is mechanically com-mutated electric motor powered from direct current (DC).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Gear materials: plastic.\\nMotor types: permanent-magnet.\\nBrush-type: Brush.\\nUncommitted motors: Homopolar motors.\\nMagnet types: ferrite magnets.\\nTorque multiplication: Generate a large force at a low speed.\\nCost effectiveness of the injection-molding process.\\nElimination of machining operations.\\nLow density: lightweight, low inertia.\\nUniformity of parts.\\nCapability to absorb shock and vibration as a result of elastic compliance.\\nAbility to operate with minimum or no lubrication, due to inherent lubricity.\\nRelatively low coefficient of friction.\\nCorrosion-resistance; elimination of plating, or protective coatings.\\nQuietness of operation.\\nTolerances often less critical than for metal gears, due in part to their greater resilience.\\nConsistency with trend to greater use of plastic housings and other components.\\nApplications of 300 RPM Rectangle Single Shaft Plastic Gea\"}' data-sheets-userformat='{\"2\":15357,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":0,\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,0],\"15\":\"Questrial\",\"16\":10}'\u003eGear materials: plastic.\u003cbr\u003eMotor types: permanent-magnet.\u003cbr\u003eBrush-type: Brush.\u003cbr\u003eUncommitted motors: Homopolar motors.\u003cbr\u003eMagnet types: ferrite magnets.\u003cbr\u003eTorque multiplication: Generate a large force at a low speed.\u003cbr\u003eCost effectiveness of the injection-molding process.\u003cbr\u003eElimination of machining operations.\u003cbr\u003eLow density: lightweight, low inertia.\u003cbr\u003eUniformity of parts.\u003cbr\u003eCapability to absorb shock and vibration as a result of elastic compliance.\u003cbr\u003eAbility to operate with minimum or no lubrication, due to inherent lubricity.\u003cbr\u003eRelatively low coefficient of friction.\u003cbr\u003eCorrosion-resistance; elimination of plating, or protective coatings.\u003cbr\u003eQuietness of operation.\u003cbr\u003eTolerances often less critical than for metal gears, due in part to their greater resilience.\u003cbr\u003eConsistency with trend to greater use of plastic housings and other components.\u003cbr\u003eApplications of 150 RPM Rectangle Single Shaft Plastic Gear.\u003c\/span\u003e\u003c\/p\u003e"}
RELAYS
TAKUMI - TK-9116-12VDC - Heavy Duty Power Relay - 12V, 30A
₹ 48.00
Quick View
{"id":12077542227,"title":"TAKUMI - TK-9116-12VDC - Heavy Duty Power Relay - 12V, 30A","handle":"takumi-tk-9116-12vdc-heavy-duty-power-relay-12v-30a","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Overview:\\nTakumi - TK9115-1C-12VDC general purpose high power 30 Amp relay is designed with firm structure and has strong anti-shock and anti-vibration durability function. This can be used in Audio applications, telelcommunications, computer peripherals, and security equipment.\\n\\nTechnical Specifications:\\nRating: Up to 30 A at 24 VDC\/240 VAC\\nWeight : 30 gms approx.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Overview:\\nTakumi - TK9115-1C-12VDC general purpose high power 30 Amp relay is designed with firm structure and has strong anti-shock and anti-vibration durability function. This can be used in Audio applications, telelcommunications, computer peripherals, and security equipment.\\n\\nTechnical Specifications:\\nRating: Up to 30 A at 24 VDC\/240 VAC\\nWeight : 30 gms approx.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eTakumi - TK9115-1C-12VDC general purpose high power 30 Amp relay is designed with firm structure and has strong anti-shock and anti-vibration durability function. This can be used in Audio applications, telecommunications, computer peripherals, and security equipment.\u003cbr\u003e\u003cbr\u003eTechnical Specifications:\u003cbr\u003eRating: Up to 30 A at 24 VDC\/240 VAC\u003cbr\u003eWeight : 30 gm approx.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Overview:\\nTakumi - TK9115-1C-12VDC general purpose high power 30 Amp relay is designed with firm structure and has strong anti-shock and anti-vibration durability function. This can be used in Audio applications, telelcommunications, computer peripherals, and security equipment.\\n\\nTechnical Specifications:\\nRating: Up to 30 A at 24 VDC\/240 VAC\\nWeight : 30 gms approx.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003c\/h5\u003e\nSensitive coil \u003cbr\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\\n\\nSensitive coil\\nSingle contact PC mountable\\nFully-sealed construction offering environment resistance\\nContinuous Current Rating upto 30A\\nHigh Capacity\\nDust Protected \/ Sealed\\nApplications:\\n\\nAir Conditioning Systems\\nAudio Applications\\nVentilation\\nHeater\\nDomestic Appliances\\nSecurity Systems\\\"\"}' data-sheets-userformat='{\"2\":4797,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"12\":0,\"15\":\"Questrial\"}'\u003eSingle contact PC mountable\u003cbr\u003eFully-sealed construction offering environment resistance\u003cbr\u003eContinuous Current Rating upto 30A\u003cbr\u003eHigh Capacity\u003cbr\u003eDust Protected \/ Sealed\u003c\/span\u003e \u003cbr\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\\n\\nSensitive coil\\nSingle contact PC mountable\\nFully-sealed construction offering environment resistance\\nContinuous Current Rating upto 30A\\nHigh Capacity\\nDust Protected \/ Sealed\\nApplications:\\n\\nAir Conditioning Systems\\nAudio Applications\\nVentilation\\nHeater\\nDomestic Appliances\\nSecurity Systems\\\"\"}' data-sheets-userformat='{\"2\":4797,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eApplications:\u003cbr\u003e\u003cbr\u003eAir Conditioning Systems\u003cbr\u003eAudio Applications\u003cbr\u003eVentilation\u003cbr\u003eHeater\u003cbr\u003eDomestic Appliances\u003cbr\u003eSecurity Systems.\u003c\/span\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e","published_at":"2017-08-17T15:44:14+05:30","created_at":"2017-08-17T15:53:30+05:30","vendor":"Takumi","type":"RELAYS","tags":["ELECTROMECHANICAL","Relay","Single Contact"],"price":4800,"price_min":4800,"price_max":4800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49466101587,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EM-RLSC-03","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"TAKUMI - TK-9116-12VDC - Heavy Duty Power Relay - 12V, 30A","public_title":null,"options":["Default Title"],"price":4800,"weight":50,"compare_at_price":null,"inventory_quantity":99,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/9116_30a.png?v=1502965420","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/9116_pin_out.png?v=1502965432"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/9116_30a.png?v=1502965420","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Overview:\\nTakumi - TK9115-1C-12VDC general purpose high power 30 Amp relay is designed with firm structure and has strong anti-shock and anti-vibration durability function. This can be used in Audio applications, telelcommunications, computer peripherals, and security equipment.\\n\\nTechnical Specifications:\\nRating: Up to 30 A at 24 VDC\/240 VAC\\nWeight : 30 gms approx.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Overview:\\nTakumi - TK9115-1C-12VDC general purpose high power 30 Amp relay is designed with firm structure and has strong anti-shock and anti-vibration durability function. This can be used in Audio applications, telelcommunications, computer peripherals, and security equipment.\\n\\nTechnical Specifications:\\nRating: Up to 30 A at 24 VDC\/240 VAC\\nWeight : 30 gms approx.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eTakumi - TK9115-1C-12VDC general purpose high power 30 Amp relay is designed with firm structure and has strong anti-shock and anti-vibration durability function. This can be used in Audio applications, telecommunications, computer peripherals, and security equipment.\u003cbr\u003e\u003cbr\u003eTechnical Specifications:\u003cbr\u003eRating: Up to 30 A at 24 VDC\/240 VAC\u003cbr\u003eWeight : 30 gm approx.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Overview:\\nTakumi - TK9115-1C-12VDC general purpose high power 30 Amp relay is designed with firm structure and has strong anti-shock and anti-vibration durability function. This can be used in Audio applications, telelcommunications, computer peripherals, and security equipment.\\n\\nTechnical Specifications:\\nRating: Up to 30 A at 24 VDC\/240 VAC\\nWeight : 30 gms approx.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003c\/h5\u003e\nSensitive coil \u003cbr\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\\n\\nSensitive coil\\nSingle contact PC mountable\\nFully-sealed construction offering environment resistance\\nContinuous Current Rating upto 30A\\nHigh Capacity\\nDust Protected \/ Sealed\\nApplications:\\n\\nAir Conditioning Systems\\nAudio Applications\\nVentilation\\nHeater\\nDomestic Appliances\\nSecurity Systems\\\"\"}' data-sheets-userformat='{\"2\":4797,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"12\":0,\"15\":\"Questrial\"}'\u003eSingle contact PC mountable\u003cbr\u003eFully-sealed construction offering environment resistance\u003cbr\u003eContinuous Current Rating upto 30A\u003cbr\u003eHigh Capacity\u003cbr\u003eDust Protected \/ Sealed\u003c\/span\u003e \u003cbr\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"\\n\\nSensitive coil\\nSingle contact PC mountable\\nFully-sealed construction offering environment resistance\\nContinuous Current Rating upto 30A\\nHigh Capacity\\nDust Protected \/ Sealed\\nApplications:\\n\\nAir Conditioning Systems\\nAudio Applications\\nVentilation\\nHeater\\nDomestic Appliances\\nSecurity Systems\\\"\"}' data-sheets-userformat='{\"2\":4797,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eApplications:\u003cbr\u003e\u003cbr\u003eAir Conditioning Systems\u003cbr\u003eAudio Applications\u003cbr\u003eVentilation\u003cbr\u003eHeater\u003cbr\u003eDomestic Appliances\u003cbr\u003eSecurity Systems.\u003c\/span\u003e\n\u003ch5\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e"}
SWITCHES
SE284 Rocker Switch 6A DPDT On Off On
Quick View
{"id":12027767443,"title":"SE284 Rocker Switch 6A DPDT On Off On","handle":"se284-rocker-switch-6a-dpdt-on-off-on","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"SE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\\n\\nApplication in general industrial equipment and home appliances like uninterrupted power supplies.\\nInvertors\\nPrinters\\nStabilizers\\nAir Conditioners\\nAutomobiles\\nWeighing Scale Equipment\\nIndustrial Lights\\n \\n\\nSE284 Rocker Switch 6A DPDT On Off On main features are:\\n\\nOption of Illumination in the button\\nLong Life, High number of operations\"}' data-sheets-userformat='{\"2\":4777,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"SE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\\n\\nApplication in general industrial equipment and home appliances like uninterrupted power supplies.\\nInvertors\\nPrinters\\nStabilizers\\nAir Conditioners\\nAutomobiles\\nWeighing Scale Equipment\\nIndustrial Lights\\n \\n\\nSE284 Rocker Switch 6A DPDT On Off On main features are:\\n\\nOption of Illumination in the button\\nLong Life, High number of operations\"}' data-sheets-userformat='{\"2\":4777,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}'\u003eSE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\u003cbr\u003eApplication in general industrial equipment and home appliances like uninterrupted power supplies.\u003cbr\u003eInvertors\u003cbr\u003ePrinters\u003cbr\u003eStabilizers\u003cbr\u003eAir Conditioners\u003cbr\u003eAutomobiles\u003cbr\u003eWeighing Scale Equipment\u003cbr\u003eIndustrial Lights\u003cbr\u003eSE284 Rocker Switch 6A DPDT On Off On main features are:\u003cbr\u003eOption of Illumination in the button\u003cbr\u003eLong Life, High number of operations\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"SE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\\n\\nApplication in general industrial equipment and home appliances like uninterrupted power supplies.\\nInvertors\\nPrinters\\nStabilizers\\nAir Conditioners\\nAutomobiles\\nWeighing Scale Equipment\\nIndustrial Lights\\n \\n\\nSE284 Rocker Switch 6A DPDT On Off On main features are:\\n\\nOption of Illumination in the button\\nLong Life, High number of operations\"}' data-sheets-userformat='{\"2\":4777,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"SE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\\n\\nApplication in general industrial equipment and home appliances like uninterrupted power supplies.\\nInvertors\\nPrinters\\nStabilizers\\nAir Conditioners\\nAutomobiles\\nWeighing Scale Equipment\\nIndustrial Lights\\n \\n\\nSE284 Rocker Switch 6A DPDT On Off On main features are:\\n\\nOption of Illumination in the button\\nLong Life, High number of operations\"}' data-sheets-userformat='{\"2\":4777,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}'\u003eTechnical Specifications:\u003cbr\u003eH.V Breakdown test 1 KV AC for 1 Minute\u003cbr\u003e Contact Rating \u003cbr\u003e6A 250 V AC\u003cbr\u003e Contact Resistance \u0026lt; 10 m Ohms\u003cbr\u003e Insulation Resistance \u0026gt; 100m ohm\u003cbr\u003e Mechanical Life (No. Of Operations) 50,000 Operations\u003cbr\u003e Electrical Life (No. Of Operations) 10,000 Operations\u003cbr\u003e Ambient Temperature -25 °C to + 80 °C\u003cbr\u003e Mounting Arrangement Snap in mounting\u003cbr\u003e Housing Colors Available Black\u003cbr\u003e Button Colors Available Black \u003cbr\u003e Housing Material Polyamide 66 UL 94 V3\u003cbr\u003e Rocker Button Material Polyamide 66 UL 94 V3 \/Polycarbonate\u003cbr\u003e Terminals Material Brass Silver Plated\u003cbr\u003e Contacts Silver\/ Silver Alloy\u003cbr\u003e Terminal Type 6.3 X 0.8 mm\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-11T14:25:33+05:30","created_at":"2017-08-11T14:29:40+05:30","vendor":"SOYNIA","type":"SWITCHES","tags":["ELECTROMECHANICAL","rocker switch","Switches"],"price":2800,"price_min":2800,"price_max":2800,"available":false,"price_varies":false,"compare_at_price":3500,"compare_at_price_min":3500,"compare_at_price_max":3500,"compare_at_price_varies":false,"variants":[{"id":48923514451,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EM-RSH-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"SE284 Rocker Switch 6A DPDT On Off On","public_title":null,"options":["Default Title"],"price":2800,"weight":50,"compare_at_price":3500,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/se284-rocker-switch-6A-dpdt-on-off-on.jpg?v=1502441983","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/se284-rocker-switch-6A-dpdt-on-off-on-dwg.jpg?v=1502441985"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/se284-rocker-switch-6A-dpdt-on-off-on.jpg?v=1502441983","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"SE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\\n\\nApplication in general industrial equipment and home appliances like uninterrupted power supplies.\\nInvertors\\nPrinters\\nStabilizers\\nAir Conditioners\\nAutomobiles\\nWeighing Scale Equipment\\nIndustrial Lights\\n \\n\\nSE284 Rocker Switch 6A DPDT On Off On main features are:\\n\\nOption of Illumination in the button\\nLong Life, High number of operations\"}' data-sheets-userformat='{\"2\":4777,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"SE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\\n\\nApplication in general industrial equipment and home appliances like uninterrupted power supplies.\\nInvertors\\nPrinters\\nStabilizers\\nAir Conditioners\\nAutomobiles\\nWeighing Scale Equipment\\nIndustrial Lights\\n \\n\\nSE284 Rocker Switch 6A DPDT On Off On main features are:\\n\\nOption of Illumination in the button\\nLong Life, High number of operations\"}' data-sheets-userformat='{\"2\":4777,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}'\u003eSE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\u003cbr\u003eApplication in general industrial equipment and home appliances like uninterrupted power supplies.\u003cbr\u003eInvertors\u003cbr\u003ePrinters\u003cbr\u003eStabilizers\u003cbr\u003eAir Conditioners\u003cbr\u003eAutomobiles\u003cbr\u003eWeighing Scale Equipment\u003cbr\u003eIndustrial Lights\u003cbr\u003eSE284 Rocker Switch 6A DPDT On Off On main features are:\u003cbr\u003eOption of Illumination in the button\u003cbr\u003eLong Life, High number of operations\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"SE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\\n\\nApplication in general industrial equipment and home appliances like uninterrupted power supplies.\\nInvertors\\nPrinters\\nStabilizers\\nAir Conditioners\\nAutomobiles\\nWeighing Scale Equipment\\nIndustrial Lights\\n \\n\\nSE284 Rocker Switch 6A DPDT On Off On main features are:\\n\\nOption of Illumination in the button\\nLong Life, High number of operations\"}' data-sheets-userformat='{\"2\":4777,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"SE284 Rocker Switch 6A DPDT On Off On is used mainly in applications like:\\n\\nApplication in general industrial equipment and home appliances like uninterrupted power supplies.\\nInvertors\\nPrinters\\nStabilizers\\nAir Conditioners\\nAutomobiles\\nWeighing Scale Equipment\\nIndustrial Lights\\n \\n\\nSE284 Rocker Switch 6A DPDT On Off On main features are:\\n\\nOption of Illumination in the button\\nLong Life, High number of operations\"}' data-sheets-userformat='{\"2\":4777,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":2,\"12\":0,\"15\":\"arial,sans,sans-serif\"}'\u003eTechnical Specifications:\u003cbr\u003eH.V Breakdown test 1 KV AC for 1 Minute\u003cbr\u003e Contact Rating \u003cbr\u003e6A 250 V AC\u003cbr\u003e Contact Resistance \u0026lt; 10 m Ohms\u003cbr\u003e Insulation Resistance \u0026gt; 100m ohm\u003cbr\u003e Mechanical Life (No. Of Operations) 50,000 Operations\u003cbr\u003e Electrical Life (No. Of Operations) 10,000 Operations\u003cbr\u003e Ambient Temperature -25 °C to + 80 °C\u003cbr\u003e Mounting Arrangement Snap in mounting\u003cbr\u003e Housing Colors Available Black\u003cbr\u003e Button Colors Available Black \u003cbr\u003e Housing Material Polyamide 66 UL 94 V3\u003cbr\u003e Rocker Button Material Polyamide 66 UL 94 V3 \/Polycarbonate\u003cbr\u003e Terminals Material Brass Silver Plated\u003cbr\u003e Contacts Silver\/ Silver Alloy\u003cbr\u003e Terminal Type 6.3 X 0.8 mm\u003c\/span\u003e\u003c\/p\u003e"}
MOTORS
MG-995 Metal Gear Servo Motor
Quick View
{"id":11708817555,"title":"MG-995 Metal Gear Servo Motor","handle":"mg-995-metal-gear-servo-motor","description":"\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eMG995 is a digital metal gear high torque servo for airplane, helicopter, RC-cars from 10 to 6-th scale truggy and monster and many RC model.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eMetal Gear, Accurate\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-07-14T10:46:55+05:30","created_at":"2017-07-14T10:50:19+05:30","vendor":"TOMSON ELECTRONICS","type":"MOTORS","tags":["ELECTROMECHANICAL","MG 995","Motors","Servo Motor","TOMSON ELECTRONICS"],"price":38000,"price_min":38000,"price_max":38000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":46477749651,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"D3-SERM-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"MG-995 Metal Gear Servo Motor","public_title":null,"options":["Default Title"],"price":38000,"weight":80,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/MG995.png?v=1503489001","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/MG_995-2.png?v=1503489001"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/MG995.png?v=1503489001","options":["Title"],"content":"\u003ch5\u003e\u003cspan\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eMG995 is a digital metal gear high torque servo for airplane, helicopter, RC-cars from 10 to 6-th scale truggy and monster and many RC model.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003e\u003cstrong\u003eFeatures \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eMetal Gear, Accurate\u003c\/span\u003e\u003c\/p\u003e"}
SWITCHES
ON-OFF-ON Momentary Switch 6205 - 16 A
₹ 53.00
Quick View
{"id":81392500755,"title":"ON-OFF-ON Momentary Switch 6205 - 16 A","handle":"on-off-on-momentary-switch-6205-16a","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eA momentary switch is a unit capable of turning any electronic device to either an on or off state when an end-user presses the switch. This type of switch can actually represent one of two types with the alternative being traditional on or off switch. They can be found in all manner of electronic devices and usually take the form of a button to help initiate the state change in a device. This is best suited for your science and technology projects.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-12-05T12:02:21+05:30","created_at":"2017-12-05T12:08:28+05:30","vendor":"TOMSON ELECTRONICS","type":"SWITCHES","tags":["ELECTROMECHANICAL","rocker switch","Switches","TOMSON ELECTRONICS"],"price":5300,"price_min":5300,"price_max":5300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":698739621907,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EM-RSH-02","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"ON-OFF-ON Momentary Switch 6205 - 16 A","public_title":null,"options":["Default Title"],"price":5300,"weight":0,"compare_at_price":null,"inventory_quantity":263,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ON-OFF-ON_Momentry_switch.png?v=1512455917","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ON-OFF-ON_Momentry_switch_2.png?v=1512455922"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/ON-OFF-ON_Momentry_switch.png?v=1512455917","options":["Title"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eA momentary switch is a unit capable of turning any electronic device to either an on or off state when an end-user presses the switch. This type of switch can actually represent one of two types with the alternative being traditional on or off switch. They can be found in all manner of electronic devices and usually take the form of a button to help initiate the state change in a device. This is best suited for your science and technology projects.\u003c\/span\u003e\u003c\/p\u003e"}
MICROCONTROLLERS
PIC 12 F 675
Quick View
{"id":12466302931,"title":"PIC 12 F 675","handle":"pic-12-f-675","description":"\u003ch5\u003eDATA SHEET\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/ww1.microchip.com\/downloads\/en\/DeviceDoc\/41190G.pdf\" title=\"PIC 12 F 675\"\u003ePIC 12 F 675\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-09-25T16:35:41+05:30","created_at":"2017-09-25T16:45:49+05:30","vendor":"TOMSON ELECTRONICS","type":"MICROCONTROLLERS","tags":["Microcontroller","PIC_12_F_675","Semiconductor IC","SEMICONDUCTORS","TOMSON ELECTRONICS"],"price":4000,"price_min":4000,"price_max":4000,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":52297471571,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SIC-MCAT-24","requires_shipping":true,"taxable":false,"featured_image":null,"available":false,"name":"PIC 12 F 675","public_title":null,"options":["Default Title"],"price":4000,"weight":25,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/12_f_675.png?v=1506338153"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/12_f_675.png?v=1506338153","options":["Title"],"content":"\u003ch5\u003eDATA SHEET\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/ww1.microchip.com\/downloads\/en\/DeviceDoc\/41190G.pdf\" title=\"PIC 12 F 675\"\u003ePIC 12 F 675\u003c\/a\u003e\u003c\/p\u003e"}
SEMICONDUCTOR DISCRETES
Diode BYV 26E
₹ 10.00
Quick View
{"id":12135423379,"title":"Diode BYV 26E","handle":"diode-byv-26e","description":"\u003ch5\u003eDATA SHEET\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/BYV26E_Datasheet.pdf?10201608492892285673\" target=\"_blank\" title=\"Diode BYV 26E\" rel=\"noopener noreferrer\"\u003eDiode BYV 26E\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-08-24T13:04:13+05:30","created_at":"2017-08-24T13:06:57+05:30","vendor":"TOMSON ELECTRONICS","type":"SEMICONDUCTOR DISCRETES","tags":["Diode_BYV_26E","diodes","Semiconductor Discretes","SEMICONDUCTORS","TOMSON ELECTRONICS"],"price":1000,"price_min":1000,"price_max":1000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":50101317331,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SD-DS-10","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Diode BYV 26E","public_title":null,"options":["Default Title"],"price":1000,"weight":10,"compare_at_price":null,"inventory_quantity":499,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BYV_26E.png?v=1503576167"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BYV_26E.png?v=1503576167","options":["Title"],"content":"\u003ch5\u003eDATA SHEET\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/BYV26E_Datasheet.pdf?10201608492892285673\" target=\"_blank\" title=\"Diode BYV 26E\" rel=\"noopener noreferrer\"\u003eDiode BYV 26E\u003c\/a\u003e\u003c\/p\u003e"}
SEMICONDUCTOR DISCRETES
Diode UF 4007
₹ 3.00
Quick View
{"id":12135331731,"title":"Diode UF 4007","handle":"diode-uf-4007","description":"\u003ch5\u003eDATA SHEET\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/uf4001_Datasheet.pdf?16747542891268396483\" target=\"_blank\" title=\"Diode UF 4007\" rel=\"noopener noreferrer\"\u003eDiode UF 4007\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-08-24T12:52:50+05:30","created_at":"2017-08-24T12:55:54+05:30","vendor":"TOMSON ELECTRONICS","type":"SEMICONDUCTOR DISCRETES","tags":["diodes","Semiconductor Discretes","SEMICONDUCTORS","TOMSON ELECTRONICS"],"price":300,"price_min":300,"price_max":300,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":50100324115,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SD-DS-07","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Diode UF 4007","public_title":null,"options":["Default Title"],"price":300,"weight":10,"compare_at_price":null,"inventory_quantity":486,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/4007_d9eec731-e107-4039-b86b-70b8283eb211.png?v=1503574449"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/4007_d9eec731-e107-4039-b86b-70b8283eb211.png?v=1503574449","options":["Title"],"content":"\u003ch5\u003eDATA SHEET\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/uf4001_Datasheet.pdf?16747542891268396483\" target=\"_blank\" title=\"Diode UF 4007\" rel=\"noopener noreferrer\"\u003eDiode UF 4007\u003c\/a\u003e\u003c\/p\u003e"}
SEMI CONDUCTOR IC
PIC 18 F 4550
₹ 298.00
Quick View
{"id":12120250451,"title":"PIC 18 F 4550","handle":"pic-18-f-4550","description":"\u003ch5\u003eDATA SHEET\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/18_F_4550_Datasheet.pdf?15728993407926329746\" title=\"PIC 18 F 4550\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePIC 18 F 4550\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-08-22T17:56:27+05:30","created_at":"2017-08-22T18:02:25+05:30","vendor":"TOMSON ELECTRONICS","type":"SEMI CONDUCTOR IC","tags":["Microcontroller","PIC_18_F_4550","Semiconductor IC","SEMICONDUCTORS","TOMSON ELECTRONICS"],"price":29800,"price_min":29800,"price_max":29800,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":49941004243,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SIC-MCAT-20","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"PIC 18 F 4550","public_title":null,"options":["Default Title"],"price":29800,"weight":30,"compare_at_price":null,"inventory_quantity":55,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/18_F_4550.png?v=1503491969"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/18_F_4550.png?v=1503491969","options":["Title"],"content":"\u003ch5\u003eDATA SHEET\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/18_F_4550_Datasheet.pdf?15728993407926329746\" title=\"PIC 18 F 4550\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePIC 18 F 4550\u003c\/a\u003e\u003c\/p\u003e"}
SEMI CONDUCTOR IC
Atmega 328
₹ 145.00
₹ 132.00
Quick View
{"id":12119542803,"title":"Atmega 328","handle":"atmega-328","description":"\u003ch5\u003eDatasheet\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/ATmega328_Datasheet.pdf?7662286042690764381\" title=\"ATMEGA 328\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eATMEGA328\u003c\/a\u003e\u003c\/p\u003e","published_at":"2017-08-22T15:07:41+05:30","created_at":"2017-08-22T15:23:16+05:30","vendor":"TOMSON ELECTRONICS","type":"SEMI CONDUCTOR IC","tags":["Atmega 328","Microcontroller","Semiconductor IC","SEMICONDUCTORS","TOMSON ELECTRONICS"],"price":13200,"price_min":13200,"price_max":13200,"available":true,"price_varies":false,"compare_at_price":14500,"compare_at_price_min":14500,"compare_at_price_max":14500,"compare_at_price_varies":false,"variants":[{"id":49929041683,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SIC-MCAT-01","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Atmega 328","public_title":null,"options":["Default Title"],"price":13200,"weight":30,"compare_at_price":14500,"inventory_quantity":206,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Atmega_328.png?v=1503409673","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Atmega_328_bd.png?v=1503409673"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/Atmega_328.png?v=1503409673","options":["Title"],"content":"\u003ch5\u003eDatasheet\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/ATmega328_Datasheet.pdf?7662286042690764381\" title=\"ATMEGA 328\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eATMEGA328\u003c\/a\u003e\u003c\/p\u003e"}
ADC
HX 711 Load Cell Amplifier Breakout Board
₹ 108.56
Quick View
{"id":12517869907,"title":"HX 711 Load Cell Amplifier Breakout Board","handle":"hx-711-load-cell-amplifier-breakout-board","description":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Load Cell Amplifier is a tiny breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your Arduino or Raspberry Pi you will be able to read the changes in the resistance of the load cell, and with some calibration, you’ll be able to get very accurate weight measurements for your robotics applications.\\n\\nThe HX711 uses a two-wire interface (Clock and Data) for communication. Any microcontroller’s GPIO pins should work, and numerous libraries have been written, making it easy to read data from the HX711. \\n\\nLoad cells use a four-wire Wheatstone bridge configuration to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN, and YLW. Each color corresponds to the conventional color coding of load cells:\\n\\nRed (Excitation+ or VCC)\\nBlack (Excitation- or GND)\\nWhite (Amplifier+, Signal+ or Output+)\\nGreen (A-, S- or O-)\\nYellow (Shield)\\nThe YLW pin acts as an optional input that is not hooked up to the strain gauge but is utilized to ground and shield against outside EMI (electromagnetic interference). Please keep in mind that some load cells might have slight variations in color coding.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe Load Cell Amplifier is a tiny breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your Arduino or Raspberry Pi you will be able to read the changes in the resistance of the load cell, and with some calibration, you’ll be able to get very accurate weight measurements for your robotics applications.\u003cbr\u003e\u003cbr\u003eThe HX711 uses a two-wire interface (Clock and Data) for communication. Any microcontroller’s GPIO pins should work, and numerous libraries have been written, making it easy to read data from the HX711. \u003cbr\u003e\u003cbr\u003eLoad cells use a four-wire Wheatstone bridge configuration to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN, and YLW. Each color corresponds to the conventional color coding of load cells:\u003cbr\u003e\u003cbr\u003eRed (Excitation+ or VCC)\u003cbr\u003eBlack (Excitation- or GND)\u003cbr\u003eWhite (Amplifier+, Signal+ or Output+)\u003cbr\u003eGreen (A-, S- or O-)\u003cbr\u003eYellow (Shield)\u003cbr\u003eThe YLW pin acts as an optional input that is not hooked up to the strain gauge but is utilized to ground and shield against outside EMI (electromagnetic interference). Please keep in mind that some load cells might have slight variations in color coding.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-10-03T17:49:15+05:30","created_at":"2017-10-03T13:39:41+05:30","vendor":"TOMSON ELECTRONICS","type":"ADC","tags":["ADC","Load_Cell","Semiconductor IC","SEMICONDUCTORS","TOMSON ELECTRONICS"],"price":10856,"price_min":10856,"price_max":10856,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":52568317523,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SIC-ADC-02","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"HX 711 Load Cell Amplifier Breakout Board","public_title":null,"options":["Default Title"],"price":10856,"weight":75,"compare_at_price":null,"inventory_quantity":20,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/HX_711_24bit_ADC_convertion_module.png?v=1507033147"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/HX_711_24bit_ADC_convertion_module.png?v=1507033147","options":["Title"],"content":"\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Load Cell Amplifier is a tiny breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your Arduino or Raspberry Pi you will be able to read the changes in the resistance of the load cell, and with some calibration, you’ll be able to get very accurate weight measurements for your robotics applications.\\n\\nThe HX711 uses a two-wire interface (Clock and Data) for communication. Any microcontroller’s GPIO pins should work, and numerous libraries have been written, making it easy to read data from the HX711. \\n\\nLoad cells use a four-wire Wheatstone bridge configuration to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN, and YLW. Each color corresponds to the conventional color coding of load cells:\\n\\nRed (Excitation+ or VCC)\\nBlack (Excitation- or GND)\\nWhite (Amplifier+, Signal+ or Output+)\\nGreen (A-, S- or O-)\\nYellow (Shield)\\nThe YLW pin acts as an optional input that is not hooked up to the strain gauge but is utilized to ground and shield against outside EMI (electromagnetic interference). Please keep in mind that some load cells might have slight variations in color coding.\"}' data-sheets-userformat='{\"2\":5033,\"3\":[null,0],\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eThe Load Cell Amplifier is a tiny breakout board for the HX711 IC that allows you to easily read load cells to measure weight. By connecting the amplifier to your Arduino or Raspberry Pi you will be able to read the changes in the resistance of the load cell, and with some calibration, you’ll be able to get very accurate weight measurements for your robotics applications.\u003cbr\u003e\u003cbr\u003eThe HX711 uses a two-wire interface (Clock and Data) for communication. Any microcontroller’s GPIO pins should work, and numerous libraries have been written, making it easy to read data from the HX711. \u003cbr\u003e\u003cbr\u003eLoad cells use a four-wire Wheatstone bridge configuration to connect to the HX711. These are commonly colored RED, BLK, WHT, GRN, and YLW. Each color corresponds to the conventional color coding of load cells:\u003cbr\u003e\u003cbr\u003eRed (Excitation+ or VCC)\u003cbr\u003eBlack (Excitation- or GND)\u003cbr\u003eWhite (Amplifier+, Signal+ or Output+)\u003cbr\u003eGreen (A-, S- or O-)\u003cbr\u003eYellow (Shield)\u003cbr\u003eThe YLW pin acts as an optional input that is not hooked up to the strain gauge but is utilized to ground and shield against outside EMI (electromagnetic interference). Please keep in mind that some load cells might have slight variations in color coding.\u003c\/span\u003e\u003c\/p\u003e"}
Trending Now
₹ 320.00
₹ 250.00
Quick View
{"id":12003410515,"title":"Arduino Nano V3.0","handle":"arduino-nano-v3-0-compatible-mini-usb-development-boa","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\n\u003cg class=\"gr_ gr_13 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace\" id=\"13\" data-gr-id=\"13\"\u003etd\u003c\/g\u003e {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO but in a different package. It works with a Mini-B USB cable. Now availabe at Tomson Electronics, Kochi, Kerala, India with Arduino Bootloader pre installed in the devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDriver Software\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/CH34x_Install_Windows_v3_4.EXE?4640933587500734268\"\u003eCH34x Driver for Windows\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e\u003cbr\u003eOperating Voltage(logic level):5V\u003cbr\u003e8 analog inputs ports:A0 ~ A7\u003cbr\u003e14 Digital input \/ output ports:TX,RX,D2 ~ D13\u003cbr\u003e6 PWM ports:D3, D5, D6, D9, D10, D11\u003cbr\u003e1 pairs of TTL level serial transceiver ports RX \/ TX\u003cbr\u003eSupports WIN7\/VISTA\/MAC\/LINUX(32 bit \/64 bit system)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-09T11:55:47+05:30","created_at":"2017-08-09T11:59:01+05:30","vendor":"Arduino","type":"ARDUINO","tags":["Arduino","Arduino_Nano_V3.0","ROBOTICS","TOMSON ELECTRONICS"],"price":25000,"price_min":25000,"price_max":25000,"available":true,"price_varies":false,"compare_at_price":32000,"compare_at_price_min":32000,"compare_at_price_max":32000,"compare_at_price_varies":false,"variants":[{"id":48670056787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-08","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Nano V3.0","public_title":null,"options":["Default Title"],"price":25000,"weight":200,"compare_at_price":32000,"inventory_quantity":33,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/nano.png?v=1502361509"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/nano.png?v=1502361509","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\n\u003cg class=\"gr_ gr_13 gr-alert gr_spell gr_inline_cards gr_run_anim ContextualSpelling ins-del multiReplace\" id=\"13\" data-gr-id=\"13\"\u003etd\u003c\/g\u003e {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO but in a different package. It works with a Mini-B USB cable. Now availabe at Tomson Electronics, Kochi, Kerala, India with Arduino Bootloader pre installed in the devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDriver Software\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/CH34x_Install_Windows_v3_4.EXE?4640933587500734268\"\u003eCH34x Driver for Windows\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328P (Arduino Nano 3.x). It has more or less the same functionality of the Arduino UNO, but in a different package. It works with a Mini-B USB cable. It comes with Arduino bootloader pre-installed.\\nFor more details, visit Official Arduino Site.\"}' data-sheets-userformat='{\"2\":15167,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e\u003cbr\u003eOperating Voltage(logic level):5V\u003cbr\u003e8 analog inputs ports:A0 ~ A7\u003cbr\u003e14 Digital input \/ output ports:TX,RX,D2 ~ D13\u003cbr\u003e6 PWM ports:D3, D5, D6, D9, D10, D11\u003cbr\u003e1 pairs of TTL level serial transceiver ports RX \/ TX\u003cbr\u003eSupports WIN7\/VISTA\/MAC\/LINUX(32 bit \/64 bit system)\u003c\/span\u003e\u003c\/p\u003e"}
₹ 1,299.00
₹ 861.00
Quick View
{"id":12142924563,"title":"Arduino Mega 2560","handle":"arduino-mega-2560-clone","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe Arduino Mega is a micro-controller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\u003cbr\u003eThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eATmega2560 micro-controller\u003cbr\u003eInput voltage - 7-12 V\u003cbr\u003e54 Digital I\/O Pins (14 PWM outputs)\u003cbr\u003e16 Analog Inputs\u003cbr\u003e256k Flash Memory\u003cbr\u003e16Mhz Clock Speed\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-25T12:44:40+05:30","created_at":"2017-08-25T12:50:50+05:30","vendor":"TOMSON ELECTRONICS","type":"ARDUINO","tags":["Arduino","Arduino_Mega_2560","Mega_2560","ROBOTICS"],"price":86100,"price_min":86100,"price_max":86100,"available":true,"price_varies":false,"compare_at_price":129900,"compare_at_price_min":129900,"compare_at_price_max":129900,"compare_at_price_varies":false,"variants":[{"id":50170985939,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-13","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Mega 2560","public_title":null,"options":["Default Title"],"price":86100,"weight":0,"compare_at_price":129900,"inventory_quantity":14,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/mega_clone_new.png?v=1504068114"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/mega_clone_new.png?v=1504068114","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe Arduino Mega is a micro-controller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\u003cbr\u003eThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The Arduino Mega is a microcontroller board based on the ATmega2560. It has 54 digital input\/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.\\nThe Mega 2560 R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Mega 2560 R3 works with all existing shields but can adapt to new shields which use these additional pins.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eATmega2560 micro-controller\u003cbr\u003eInput voltage - 7-12 V\u003cbr\u003e54 Digital I\/O Pins (14 PWM outputs)\u003cbr\u003e16 Analog Inputs\u003cbr\u003e256k Flash Memory\u003cbr\u003e16Mhz Clock Speed\u003c\/span\u003e\u003c\/p\u003e"}
₹ 599.00
₹ 460.00
Quick View
{"id":12142514131,"title":"Arduino Uno","handle":"arduino-uno-clone","description":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDriver Software\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/CH34x_Install_Windows_v3_4.EXE?4640933587500734268\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eCH34x Driver for Windows\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eOperating Voltage 5V\u003cbr\u003eInput Voltage (recommended) 7-12V\u003cbr\u003eInput Voltage (limits) 6-20V\u003cbr\u003eDigital I\/O Pins 14 (of which 6 provide PWM output)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-08-25T10:28:35+05:30","created_at":"2017-08-25T10:36:24+05:30","vendor":"Arduino","type":"ARDUINO","tags":["Arduino","Arduino Uno","ROBOTICS","TOMSON ELECTRONICS","Uno"],"price":46000,"price_min":46000,"price_max":46000,"available":true,"price_varies":false,"compare_at_price":59900,"compare_at_price_min":59900,"compare_at_price_max":59900,"compare_at_price_varies":false,"variants":[{"id":50162425619,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-12","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Uno","public_title":null,"options":["Default Title"],"price":46000,"weight":50,"compare_at_price":59900,"inventory_quantity":117,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/uno_new.png?v=1512464022"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/uno_new.png?v=1512464022","options":["Title"],"content":"\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003e\u003cbr\u003eThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDriver Software\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/CH34x_Install_Windows_v3_4.EXE?4640933587500734268\"\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eCH34x Driver for Windows\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Description\\n\\nThe Arduino Uno has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.The Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital input\/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eOperating Voltage 5V\u003cbr\u003eInput Voltage (recommended) 7-12V\u003cbr\u003eInput Voltage (limits) 6-20V\u003cbr\u003eDigital I\/O Pins 14 (of which 6 provide PWM output)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
₹ 149.00
₹ 83.00
Quick View
{"id":12142729299,"title":"NRF 24 L 01","handle":"nrf-24-l-01","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eMaximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\u003cbr\u003eParticularly suitable for industrial control applications.\u003cbr\u003e125 Channels, Multi-point communication and frequency hopping to meet the communication needs\u003cbr\u003eBuilt-in hardware CRC error detection, Multipoint communication address control.\u003cbr\u003eLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\u003cbr\u003eBuilt-in 2.4Ghz antenna\u003cbr\u003eAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\u003cbr\u003eBuilt-in voltage regulator\u003cbr\u003eStandard DIP Pitch Interface for embedded applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTechnical Parameters\u003cbr\u003eInput Voltage: 1.9 ~ 3.6V\u003cbr\u003eSize: 34mm X 17mm X 1mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2017-08-25T11:33:56+05:30","created_at":"2017-08-25T11:43:01+05:30","vendor":"TOMSON ELECTRONICS","type":"RF","tags":["IOT \u0026 WIRELESS COMMUNICATION","NRF_24_L_01","RF","ROBOTICS","TOMSON ELECTRONICS"],"price":8300,"price_min":8300,"price_max":8300,"available":true,"price_varies":false,"compare_at_price":14900,"compare_at_price_min":14900,"compare_at_price_max":14900,"compare_at_price_varies":false,"variants":[{"id":50167574035,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RT-WIFI-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"NRF 24 L 01","public_title":null,"options":["Default Title"],"price":8300,"weight":100,"compare_at_price":14900,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/NRF_module.png?v=1503647289"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/NRF_module.png?v=1503647289","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eMaximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\u003cbr\u003eParticularly suitable for industrial control applications.\u003cbr\u003e125 Channels, Multi-point communication and frequency hopping to meet the communication needs\u003cbr\u003eBuilt-in hardware CRC error detection, Multipoint communication address control.\u003cbr\u003eLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\u003cbr\u003eBuilt-in 2.4Ghz antenna\u003cbr\u003eAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\u003cbr\u003eBuilt-in voltage regulator\u003cbr\u003eStandard DIP Pitch Interface for embedded applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,\\nParticularly suitable for industrial control applications.\\n125 Channels, Multi-point communication and frequency hopping to meet the communication needs\\nBuilt-in hardware CRC error detection, Multipoint communication address control.\\nLow-power 1.9 ~ 3.6V, only 1uA on Power down mode\\nBuilt-in 2.4Ghz antenna\\nAvailable software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.\\nBuilt-in voltage regulator\\nStandard DIP Pitch Interface for embedded applications\"}' data-sheets-userformat='{\"2\":5053,\"3\":[null,0],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"15\":\"Questrial\"}'\u003eTechnical Parameters\u003cbr\u003eInput Voltage: 1.9 ~ 3.6V\u003cbr\u003eSize: 34mm X 17mm X 1mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e"}
₹ 15.00
Quick View
{"id":82356174867,"title":"Johnson Gear Motor L Clamp","handle":"johnson-gear-motor-l-clamp","description":"","published_at":"2017-12-08T12:12:41+05:30","created_at":"2017-12-06T13:54:32+05:30","vendor":"TOMSON ELECTRONICS","type":"ROBOT ACCESSORIES","tags":["Johnson motor","L_CLAMP","robot accessories","ROBOTICS","TOMSON ELECTRONICS"],"price":1500,"price_min":1500,"price_max":1500,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":711419592723,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"SS-DS-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Johnson Gear Motor L Clamp","public_title":null,"options":["Default Title"],"price":1500,"weight":0,"compare_at_price":null,"inventory_quantity":192,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/L_clamp.png?v=1512548681","\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/L_clamp_for_johnson_motor.png?v=1512548686"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/L_clamp.png?v=1512548681","options":["Title"],"content":""}
₹ 8.26
Quick View
{"id":82327109651,"title":"BO Motor Clamp","handle":"bo-motor-clamp","description":"","published_at":"2017-12-06T12:31:11+05:30","created_at":"2017-12-06T13:00:29+05:30","vendor":"TOMSON ELECTRONICS","type":"ROBOT ACCESSORIES","tags":["BO_Motor_Clamp","robot accessories","ROBOTICS","TOMSON ELECTRONICS"],"price":826,"price_min":826,"price_max":826,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":711189233683,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"RB-RA-44","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"BO Motor Clamp","public_title":null,"options":["Default Title"],"price":826,"weight":0,"compare_at_price":null,"inventory_quantity":292,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BO_motor_clamp.png?v=1512545434"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/BO_motor_clamp.png?v=1512545434","options":["Title"],"content":""}
₹ 680.00
Quick View
{"id":12003389331,"title":"Arduino Lilypad ATMEGA 32U4","handle":"arduino-lilypad","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).\\nLilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).\\nLilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).\u003cbr\u003eLilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-09T11:47:44+05:30","created_at":"2017-08-09T11:52:08+05:30","vendor":"Arduino","type":"ARDUINO","tags":["Arduino","Arduino_Lilypad","ROBOTICS","TOMSON ELECTRONICS"],"price":68000,"price_min":68000,"price_max":68000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":48669213843,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-06","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Lilypad ATMEGA 32U4","public_title":null,"options":["Default Title"],"price":68000,"weight":200,"compare_at_price":null,"inventory_quantity":10,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/lilypad.png?v=1512455476"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/lilypad.png?v=1512455476","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).\\nLilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"The LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).\\nLilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eThe LilyPad Arduino consists of an ATmega328 with the Arduino bootloader and a minimum number of external components to keep it as small (and as simple) as possible. This board will run from 2V to 5V and offers large pin-out holes that make it easy to sew and connect. Each of these pins, with the exception of (+) and (-), can control an attached input or output device (like a light, motor, or switch).\u003cbr\u003eLilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!\u003c\/span\u003e\u003c\/p\u003e"}
₹ 456.00
₹ 396.00
Quick View
{"id":12003360723,"title":"Arduino Lcd Shield With Keypad","handle":"arduino-lcd-shield-with-keypad","description":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and backlit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and backlit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and back lit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and backlit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and backlit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eSpecifications:\u003cbr\u003eOperating Voltage: 5 V\u003cbr\u003e6 Push buttons\u003cbr\u003eExpanded Analog Pin out\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-09T11:40:32+05:30","created_at":"2017-08-09T11:42:48+05:30","vendor":"Arduino","type":"ARDUINO","tags":["Arduino","Arduino Lcd Shield With Keypad","ROBOTICS","TOMSON ELECTRONICS"],"price":39600,"price_min":39600,"price_max":39600,"available":true,"price_varies":false,"compare_at_price":45600,"compare_at_price_min":45600,"compare_at_price_max":45600,"compare_at_price_varies":false,"variants":[{"id":48668271699,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"DP-DT-04","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"Arduino Lcd Shield With Keypad","public_title":null,"options":["Default Title"],"price":39600,"weight":100,"compare_at_price":45600,"inventory_quantity":27,"inventory_management":"shopify","inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/LCD_keypad_shield.png?v=1503407450"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/LCD_keypad_shield.png?v=1503407450","options":["Title"],"content":"\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and backlit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eDescription\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and backlit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003e16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and back lit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and backlit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eFeatures\u003c\/span\u003e\u003c\/h5\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cp\u003e\u003cspan data-sheets-value='{\"1\":2,\"2\":\"16x2 Lcd and Keypad Shield is a very popular shield for Arduino uno r3 board.It provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 16x2 character LCD . The keypad consists of 5 keys — select, up, right, down and left. To save the digital IO pins, the keypad interface uses only one ADC channel (Analog Pin 0). The key value is read through a 5 stage voltage divider. The LCD shield supports contrast adjustment and backlit on\/off functions. It also expands analog pins for easy analog sensor reading and display.\"}' data-sheets-userformat='{\"2\":15295,\"3\":[null,0],\"4\":[null,2,16777215],\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":[null,2,0]},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"10\":1,\"11\":4,\"12\":0,\"14\":[null,2,2435631],\"15\":\"Questrial\",\"16\":10}'\u003eSpecifications:\u003cbr\u003eOperating Voltage: 5 V\u003cbr\u003e6 Push buttons\u003cbr\u003eExpanded Analog Pin out\u003c\/span\u003e\u003c\/p\u003e"}
