MP 1584 DC-DC 3A Step Down Module

₹ 84.56
Save ₹ 14

DESCRIPTION

MP1584 DC-DC 3A Step Down Module converts input voltage between 4.5V and 28V into a smaller voltage between 0.8V and 18V, capable of driving a 3A load with excellent line and load regulation. This makes the fully compatible with setups from 2-6s. Simply turn the small screw to adjust the voltage.

These are perfect where space is a factor, or you don't want to add a whole PDB just to get 5v. Input must be >1.5V higher than output! The chip will get to high-temperature protection mode when it works at a high-power conversion, without any cooling, it is able to output 3A current at 5V. But at a higher output voltage, the current output capacity is lower than 3A, approx 2A.

FEATURES

Wide 4.5V to 28V Operating Input Range
Up to 92% Efficiency
Programmable Switching Frequency from 100kHz to 1.5MHz
High-Efficiency Pulse Skipping Mode for Ceramic Capacitor Stable
Internally Set Current Limit without a Current Sensing Resistor
Cycle-by-Cycle Over Current Protection
Input Under Voltage Lockout
Input Voltage: 4.5V-28VDC
Output Voltage: 0.8V-18VDC
Continuous Output Current: Max. 3A
Peak Output Current: 4A
Max. Efficiency: 92%
Output Ripple: 30mV
Switching Frequency: 100kHz to 1.5MHz
Operating Temperature: -40℃ to +85℃
Dimensions: 22mm*17mm*4mm

DEVELOPMENT SOURCES

Datasheet

ALSO SEARCHED AS:

MP 1584 DC-DC 3A Step-Down Module