MG90S Metal Gear Micro Servo
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Hyper Delivery
    in Kochi
  • 99% Customers
    Feedbacks
  • 24x7
    Customer Service
  • Payment
    Secure System
  • Only Best
    Products

MG90S Metal Gear Micro Servo

Available: In Stock
₹ 188.80 ₹ 249.00
Image
  • Order within
Secure
DESCRIPTION

Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino, our 16-channel Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware.

Please note, this servo will 'hold' the position even when no signal is sent!


FEATURES

Item Name: MG90S  servo

Weight: about 13.4g

Dimension: 22.8 x 12.2 x 28.5mm

Stall Torque: 1.8kg/cm(4.8V ),2.2kg/cm(6V)

Operating Speed: 0.1sec/60degree(4.8v),0.08sec/60degree(6v)

Operating Voltage: 4.8-6.0V 

Motor Type: coreless motor

Connector Wire Length : 175mm


ALSO SEARCHED AS:
MG90S, Micro servo MG90, Metal geared Micro servo

DESCRIPTION

Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. Of course, its not nearly as strong as a standard servo. Works great with the Motor Shield for Arduino, our 16-channel Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware.

Please note, this servo will 'hold' the position even when no signal is sent!


FEATURES

Item Name: MG90S  servo

Weight: about 13.4g

Dimension: 22.8 x 12.2 x 28.5mm

Stall Torque: 1.8kg/cm(4.8V ),2.2kg/cm(6V)

Operating Speed: 0.1sec/60degree(4.8v),0.08sec/60degree(6v)

Operating Voltage: 4.8-6.0V 

Motor Type: coreless motor

Connector Wire Length : 175mm


ALSO SEARCHED AS:
MG90S, Micro servo MG90, Metal geared Micro servo

We will arrange for shipment of the products to you. Shipping schedules are estimates only and cannot be guaranteed. We are not liable for any delays in the shipments. Title and risk of loss and damages pass on to you upon the products delivery to you. In case reverse shipment cannot be arranged by us due to unavailability of our logistics partners, then in that case you may be requested to send such products through any available courier services.