Ublox NEO 7M GPS With Compass for APM
Rated 3.5/5 based on 11 customer reviews

Ublox NEO 7M GPS With Compass for APM

Image
  • Order within
Available: In Stock
₹ 1,652.00 ₹ 1,890.00

DESCRIPTION

This is a Ublox Neo 7M GPS module that includes a HMC5883L digital compass. The new Ublox NEO 7 series is a high sensitivity, low power GPS module that has 56 channels and outputs precise position updates at 10Hz. This GPS module also comes with a moulded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter. This Ublox GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Ublox Neo 6 series modules.

Ublox Neo 7M GPS module that includes an HMC5883L digital compass.  The new Ublox NEO 7 series is a high sensitivity, low power GPS module that has 56 channels and outputs precise position updates at 10Hz.  This GPS module also comes with a moulded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter.

This Ublox Neo 7M GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Ublox Neo 6 series modules.   This Ublox Neo 7 module also includes a rechargeable backup battery to allow for HOT starts and also includes an i2c EEPROM to store the configuration settings.  Out of the box this GPS module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This GPS module includes two cables, a 6pin connector for the GPS module and a 4 pin connector for the i2c compass.Other than disabling the internal compass, connecting the UBlox is the same for APM2.0/APM2.5 as for APM2.6.

FEATURES

  • Size : 60×11.5mm(Diameter x height)
  • Cable length : 20cm
  • Weight: 26g
  • Tracking sensitivity: 161dBm
  • Capture sensitivity: 148dBm
  • cold start time: 38s average
  • Warm start time: 35s average
  • Boot time: 1s average
  • Capture time: 0.1s Average
  • Temperature Range: 40 to +80
  • Wide power supply voltage Range: +3.5V~+5.5V
  • Main chip: U-BLOX NEO-7M
  • C/A code,1.023MHz
  • Receiver Frequency : L1 [1575.42MHz]
  • Locate performance
  • 2D: 3m(Average)
  • 2D:2m(average),with WAAS
  • drifting<0.02m/s
  • accuracy: 1us
  • coordinate system: WGS-84
  • max attitude height: 18000
  • Max speed : 515m/s
  • Acceleration : <4g
  • These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
  • Super Bright LED
  • Backplane with Standard Mk style mounting holes 45mm X 45mm
  • 38400 bps (Default) Changed to 115200bps!
  • Output GGA, GSA and RMC frames
  • 1Hz (Default) Changed to 5Hz!
  • Permanent Configuration Retention
  • compass on board
  • 6 pin connector for EZ connect to MEGA BLACK
  • 4 pin connector for only GPS use
  • 4 pin connector for compass only use
  • Can use both 4 pin at once

DEVELOPMENT SOURCES

  PDF ICONDatasheet of Neo 7 series.

ALSO SEARCHED AS:

Ublox NEO 7M GPS With Compass for APM

 

DESCRIPTION

This is a Ublox Neo 7M GPS module that includes a HMC5883L digital compass. The new Ublox NEO 7 series is a high sensitivity, low power GPS module that has 56 channels and outputs precise position updates at 10Hz. This GPS module also comes with a moulded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter. This Ublox GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Ublox Neo 6 series modules.

Ublox Neo 7M GPS module that includes an HMC5883L digital compass.  The new Ublox NEO 7 series is a high sensitivity, low power GPS module that has 56 channels and outputs precise position updates at 10Hz.  This GPS module also comes with a moulded plastic case which keeps the module protected against the elements making it ideal for use on your aircraft or quadcopter.

This Ublox Neo 7M GPS module uses an active circuitry ceramic patch antenna to provide excellent GPS signal which outperforms the older Ublox Neo 6 series modules.   This Ublox Neo 7 module also includes a rechargeable backup battery to allow for HOT starts and also includes an i2c EEPROM to store the configuration settings.  Out of the box this GPS module is configured to run at 38400 Baud and is configured to run with APM/Pixhawk systems.  This GPS module includes two cables, a 6pin connector for the GPS module and a 4 pin connector for the i2c compass.Other than disabling the internal compass, connecting the UBlox is the same for APM2.0/APM2.5 as for APM2.6.

FEATURES

  • Size : 60×11.5mm(Diameter x height)
  • Cable length : 20cm
  • Weight: 26g
  • Tracking sensitivity: 161dBm
  • Capture sensitivity: 148dBm
  • cold start time: 38s average
  • Warm start time: 35s average
  • Boot time: 1s average
  • Capture time: 0.1s Average
  • Temperature Range: 40 to +80
  • Wide power supply voltage Range: +3.5V~+5.5V
  • Main chip: U-BLOX NEO-7M
  • C/A code,1.023MHz
  • Receiver Frequency : L1 [1575.42MHz]
  • Locate performance
  • 2D: 3m(Average)
  • 2D:2m(average),with WAAS
  • drifting<0.02m/s
  • accuracy: 1us
  • coordinate system: WGS-84
  • max attitude height: 18000
  • Max speed : 515m/s
  • Acceleration : <4g
  • These are Pre-configured, Flashed with the correct settings, and tested. To make them Plug and Play.
  • Super Bright LED
  • Backplane with Standard Mk style mounting holes 45mm X 45mm
  • 38400 bps (Default) Changed to 115200bps!
  • Output GGA, GSA and RMC frames
  • 1Hz (Default) Changed to 5Hz!
  • Permanent Configuration Retention
  • compass on board
  • 6 pin connector for EZ connect to MEGA BLACK
  • 4 pin connector for only GPS use
  • 4 pin connector for compass only use
  • Can use both 4 pin at once

DEVELOPMENT SOURCES

  PDF ICONDatasheet of Neo 7 series.

ALSO SEARCHED AS:

Ublox NEO 7M GPS With Compass for APM

 

Shipping Policies:

  1. To Ensure that your order reaches you in the fastest time and in good condition, we only ship our goods through SHIPROCKET, DTDC and SPEEDPOST
  2. We currently do not have an option for the customer to choose a delivery partner, Our logistics team will use the best possible shipping method to execute the order.
  3. Our Team strives to ship all items in your order together but this might not be possible at all times due to the properties or availability of the products either case we inform the customer before proceeding with the shipment.

Damage in Transit:

  1. If you find that the packing of package delivered is tampered or damaged and that it might have caused damage to the product inside before accepting the shipment, you must click a picture and refuse to accept the delivery and inform our Customer Care +91 8606650999 along with your order number. We will make our best efforts to ensure replacement delivery at the earliest.

Order Tracking:

You may track the order through the fulfilment emails send from our email: help@tomsonelectronics.com or through the SMS sent from SHIPROCKET to your registered mobile number at the time of placing order

Shipping Time & Delivery:

  1. Orders Placed up to 4:00PM will be packed and prepared to be shipped on the same day.
  2. We make our best efforts to prepare the orders for shipping on the same day or within 24 hours from the time the order was received.
  3. Due to the pandemic the government has imposed a restriction on the functioning of delivery partners hence a slight delay can be expected in transferring the packages to the concerned delivery partners.
  4. Our logistics partners guarantee a delivery of packages within 1-6 Working days to anywhere in India there can be delays as each shipping partner has their own method and transit hubs to each location hence the exact delivery time is not predictable therefore we request all our customers plan your orders allowing sufficient time for the delivery.

Making changes in order:

For making changes in order, you can contact us via email or call within 2 hours from the time of placing order for making changes in following fields

  1. Product
  2. Quantity
  3. Address