MPU 9250 9 DOF 3 Axis Accelerometer, Gyro, & Magnetometer

MPU 9250 9 DOF 3 Axis Accelerometer, Gyro, & Magnetometer

  • ₹ 391.76
  • Save ₹ 37

Only 9 left!

DESCRIPTION
This module features the Invensense MPU-9250, which is a multi-chip module (MCM) consisting of two dies integrated into a single QFN package. One die houses the 3-Axis gyroscope and the 3-Axis Accelerometer. The other die houses the AK8963 3-Axis magnetometer from Asahi Kasei Microdevices Corporation. Hence, the MPU-9250 is a 9-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer, and a Digital Motion Processor (DMP). The MPU-9250 also features an embedded temperature sensor. 

 

FEATURES

  • On-board pull-up resistors on SDA, SCL, and nCS
  • On-board pull-down resistors on FSYNC and AD0
  • 3-Axis Accelerometer
    • Range: up to ± 16 g
    • Sensitivity: up to 16,384 LSB/g
  • 3-Axis Gyroscope
    • Range: up to ± 2000 deg/sec
    • Sensitivity: up to 131 LSB/deg/sec
  • 3-Axis Magnetometer
    • Range: ± 4800 µT
    • Sensitivity: 0.6 µT/LSB
  • Supply Voltage: 4.4 to 6.5 V or 3.3V if you solder the solder jumper near the on-board voltage regulator
  • Interface: I2C
  • I2C Address: 0x68 by default, 0x69 if AD0 is pulled high
  • Board Dimensions: 25.5mm (1.004") long x 15.4mm (0.606") wide, 3mm (0.118") inside diameter of mounting holes
  • Weight: 2.72g (0.096oz)

 

RESOURCES
MPU 9250 Datasheet
MPU 9250 Register Map
AK 8963 Datasheet
MPU 9250 Model Schematic
Arduino MPU 9250 Library

A
LSO SEARCHED AS:
MPU 9250, 3 AXIS ACCELERO GYRO MAGNETOMETER

 


We Also Recommend