MOC 3041 ON
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Hyper Delivery
    in Kochi
  • 99% Customers
    Feedbacks
  • 24x7
    Customer Service
  • Payment
    Secure System
  • Only Best
    Products

MOC 3041 ON

Available: In Stock
₹ 18.29
Image
  • Order within
Secure

MOC 3041 ON

⁍The MOC3041 is a Zero-Crossing TRIAC driven Optocoupler. Meaning it has a Infra-red Light Emitting Diode (LED) inside it coupled with a TRIAC. When the LED is triggered the TRIAC is also turned on.An opto-isolator like MOC3041 is normally used to control another external switching device like a TRIAC, MOSFET or SCR which in turn will control an AC or DC load. The TRIAC present inside the MOC3041 can provide upto 1A peak current which is high enough to trigger an external switch. The TRIAC by itself should not be used to switch loads without an external switch.

 MOC 3041 ON FEATURES

  • ⁍Opto-isolator with Zero-Crossing Triac Driver
  • ⁍Input LED Diode Forward Voltage: 1.3V
  • ⁍LED Forward Trigger Current: 15mA
  • ⁍TRIAC output terminal voltage: 400V (max)
  • ⁍TRIAC peak output current: 1A
  • ⁍Available as 6-pin PDIP with and without M-suffix

Applications

  • ⁍AC Light dimmers
  • ⁍Contactor / Relay Control
  • ⁍AC motor speed control
  • ⁍Noise coupling circuits
  • ⁍Controlling AC loads using MCU/MPU
  • ⁍AC/DC Power control
  • ⁍Solenoid / Valve control 

Developer : MOC3041_Datasheet


MOC 3041 ON

⁍The MOC3041 is a Zero-Crossing TRIAC driven Optocoupler. Meaning it has a Infra-red Light Emitting Diode (LED) inside it coupled with a TRIAC. When the LED is triggered the TRIAC is also turned on.An opto-isolator like MOC3041 is normally used to control another external switching device like a TRIAC, MOSFET or SCR which in turn will control an AC or DC load. The TRIAC present inside the MOC3041 can provide upto 1A peak current which is high enough to trigger an external switch. The TRIAC by itself should not be used to switch loads without an external switch.

 MOC 3041 ON FEATURES

  • ⁍Opto-isolator with Zero-Crossing Triac Driver
  • ⁍Input LED Diode Forward Voltage: 1.3V
  • ⁍LED Forward Trigger Current: 15mA
  • ⁍TRIAC output terminal voltage: 400V (max)
  • ⁍TRIAC peak output current: 1A
  • ⁍Available as 6-pin PDIP with and without M-suffix

Applications

  • ⁍AC Light dimmers
  • ⁍Contactor / Relay Control
  • ⁍AC motor speed control
  • ⁍Noise coupling circuits
  • ⁍Controlling AC loads using MCU/MPU
  • ⁍AC/DC Power control
  • ⁍Solenoid / Valve control 

Developer : MOC3041_Datasheet


We will arrange for shipment of the products to you. Shipping schedules are estimates only and cannot be guaranteed. We are not liable for any delays in the shipments. Title and risk of loss and damages pass on to you upon the products delivery to you. In case reverse shipment cannot be arranged by us due to unavailability of our logistics partners, then in that case you may be requested to send such products through any available courier services.