Fluke 107 Palm sized CAT III Digital Multimeter
Rated 3.5/5 based on 11 customer reviews

Fluke 107 Palm sized CAT III Digital Multimeter

Image
  • Order within
Available: In Stock
₹ 5,546.00

The Fluke 107 is a compact, easy-to-use digital multimeter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a shirt pocket or work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 107 delivers reliable measurements time after time.

Fluke 107 Complete test functions

  • AC and DC voltage measurement
  • AC and DC current measurement
  • Resistance measurement
  • Capacitance measurement
  • Diode measurement
  • Frequency and duty cycle test and other functions to meet basic electrical maintenance, electrical measurement, and electronic measurement applications

Ergonomic and Rugged

  • Comfortable grip, only weighs 200g and easy to carry
  • Rugged enclosure and 1-meter drop test

Fluke 107 Additional Features

  • Full-parameter automatic range test, which is convenient and quick to test; at the same time, it reduces the number of rotations of the wave plate and prolongs the life of the instrument.
  • 6000-word large screen LCD backlight display
  • Battery powered, automatic power save mode
  • Data retention feature makes it easier to read measurement results
  • Comes with SmartStrap™ intelligent magnetic multi-purpose lanyard

Key safety features

  • Compliant with IEC61010-1 CATIII 600V overvoltage protection safety standard

Fluke 107 Comes with Fluke TL75 Hard Point™ Test Lead Set

  • One pair (red, black) of comfort grip probes
  • 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
  • Recommended for general purpose measurements
  • CAT II 1000 V, 10 A rating
  • CAT IV 600 V, CAT III 1000 V only with protective cap

Warranty, service plan

  • The Fluke 107 Palm-sized, CAT III Digital Multimeter has a one-year warranty.

The Fluke 107 is a compact, easy-to-use digital multimeter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a shirt pocket or work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 107 delivers reliable measurements time after time.

Fluke 107 Complete test functions

  • AC and DC voltage measurement
  • AC and DC current measurement
  • Resistance measurement
  • Capacitance measurement
  • Diode measurement
  • Frequency and duty cycle test and other functions to meet basic electrical maintenance, electrical measurement, and electronic measurement applications

Ergonomic and Rugged

  • Comfortable grip, only weighs 200g and easy to carry
  • Rugged enclosure and 1-meter drop test

Fluke 107 Additional Features

  • Full-parameter automatic range test, which is convenient and quick to test; at the same time, it reduces the number of rotations of the wave plate and prolongs the life of the instrument.
  • 6000-word large screen LCD backlight display
  • Battery powered, automatic power save mode
  • Data retention feature makes it easier to read measurement results
  • Comes with SmartStrap™ intelligent magnetic multi-purpose lanyard

Key safety features

  • Compliant with IEC61010-1 CATIII 600V overvoltage protection safety standard

Fluke 107 Comes with Fluke TL75 Hard Point™ Test Lead Set

  • One pair (red, black) of comfort grip probes
  • 48 inches (1.22 meter) PVC insulated test leads with right-angle shrouded banana plugs
  • Recommended for general purpose measurements
  • CAT II 1000 V, 10 A rating
  • CAT IV 600 V, CAT III 1000 V only with protective cap

Warranty, service plan

  • The Fluke 107 Palm-sized, CAT III Digital Multimeter has a one-year warranty.

Accuracy is available for one year after calibration, operating from 18 °C to 28 °C and relative humidity from 0% to 75%. The format of the accuracy specification is: ± ([% of reading] + [least significant digit])


Precision specifications
AC voltage
(40 Hz to 500 Hz)1
Range Resolution Accuracy
6.000 V
60.00 V
600.0 V
0.001 V
0.01 V
0.1 V
1.0 % + 3
DC voltage 6.000 V
60.00 V
600.0 V
0.001 V
0.01 V
0.1 V
0.5 % + 3
Exchange millivolts 600.0 mV 0.1 mV 3.0 % + 3
Diode test2 2.000 V 0.001 V 10 %
Resistance
(ohm)
400.0 Ω
4.000 kΩ
40.00 kΩ
400.0 kΩ
4.000 MΩ
40.00 MΩ
0.1 Ω
0.001 kΩ
0.01 kΩ
0.1 kΩ
0.001 MΩ
0.01 MΩ
0.5 % + 3
0.5 % + 2
0.5 % + 2
0.5 % + 2
0.5 % + 2
1.5% + 3
Capacitor3 50.00 nF
500.0 nF
5.000 μF
50.00 μF
500.0 μF
1000 μF
0.01 nF
0.1 nF
0.001 μF
0.01 μF
0.1 μF
1 μF
2 % + 5
2 % + 5
5 % + 5
5 % + 5
5 % + 5
5 % + 5
Frequency4 Hz
(10 Hz – 100 kHz)
50.00 Hz
500.0 Hz
5.000 kHz
50.00 kHz
100.0 kHz
0.01 Hz
0.1 Hz
0.001 kHz
0.01 kHz
0.1 kHz
0.1 % + 3
Duty cycle4 1 % to 99 % 0.10 % 1 % typical case5
AC current
(40 Hz - 200 Hz)
4.000 A
10.00 A
0.001 A
0.01 A
1.5 % + 3
DC 4.000 A
10.00 A
0.001 A
0.01 A
1.5 % + 3
  1. All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified.
  2. Typically, the open circuit test voltage is 2.0 V and the short circuit current is < 0.6 mA.
  3. The parameters do not include errors due to test lead capacitance and capacitor substrate (up to 1.5 nF in the 50 nF range).
  4. All AC current, frequency, and duty cycle are specified from 1% to 100% of the range. Input values below 1% of range are not specified.
  5. Typically, the frequency is 50 Hz or 60 Hz and the duty cycle is 10% to 90%.
Features Overload protection Input impedance (nominal value) Common mode rejection ratio Normal mode rejection ratio
AC voltage 600 V 1 >10 MΩ <100 pF 2 >60 dB at 50 Hz or 60 Hz at DC current
Exchange millivolts 600 mV >1M, <100 pF >80 dB at 50 Hz or 60 Hz
DC voltage 600 V 1 >10 MΩ <100 pF >100 dB at 50 Hz or 60 Hz at DC current >60 dB at 50 Hz or 60 Hz
  1. Up to 6 x 105 V Hz
  2. For medium voltage (alternating current), the input impedance is approximately 1 MΩ.
General technical indicators
The highest voltage applied to any terminal and ground 600 V
Display (LCD) 6000 counts, updated three times per second
Type of battery Two AAA batteries (NEDA 24A, IEC LR03)
Battery life At least 200 hours
Temperature
Operating temperature 0 °C to 40 °C
Storage temperature -30 °C to 60 °C
Relative humidity
Working humidity No condensation below 10 °C
≤ 90 % at 10 °C to 30 °C; ≤ 75 % at 30 °C to 40 °C
Working humidity, 40 MΩ range ≤ 80 % at 10 °C to 30 °C; ≤ 70 % at 30 °C to 40 °C
Altitude
Working elevation 2000 m
Storage altitude 12,000 m
Temperature coefficient 0.1 X (specified accuracy) / °C (<18 °C or >28 °C)
Current input fuse protection 11A, 1000V fast-melting type, must use Fluke designated parts
Volume (height x width x length) 142 mm x 69 mm x 28 mm
Weight 200 g
Protection level IEC 60529: IP 40
Safety IEC 61010-1: 600 V CAT III, pollution degree 2
Electromagnetic environment IEC 61326-1: Portable
Electromagnetic compatibility Applicable only in Korea. Class A equipment (industrial broadcasting and communication equipment)1
1 This product meets the requirements of industrial (Class A) electromagnetic wave equipment, which should be noted by the seller or user. The device is suitable for use in a work environment, not a home environment.

Manuals (2)

Register products

Shipping Policies

1.     To Ensure that your order reaches you in the fastest time and in good condition, we only ship our goods through SHIPROCKET, DTDC and SPEEDPOST.

2.     We currently do not have an option for the customer to choose a delivery partner, Our logistics team will use the best possible shipping method to execute the order.

3.     Our Team strives to ship all items in your order together but this might not be possible at all times due to the properties or availability of the products either case we inform the customer before proceeding with the shipment.

Damage in Transit:

1.     If you find that the packing of package delivered is tampered or damaged and that it might have caused damage to the product inside before accepting the shipment, you must click a picture and refuse to accept the delivery and inform our Customer Care +91 8606650999 along with your order number. We will make our best efforts to ensure replacement delivery at the earliest.

Order Tracking:

1.     You may track the order through the fulfilment emails send from our email: help@tomsonelectronics.com or through the SMS sent from SHIPROCKET to your registered mobile number at the time of placing order.

Shipping Time & Delivery:

1.     Orders Placed up to 4:00PM will be packed and prepared to be shipped on the same day.

2.     We make our best efforts to prepare the orders for shipping on the same day or within 24 hours from the time the order was received.

3.     Due to the pandemic the government has imposed a restriction on the functioning of delivery partners hence a slight delay can be expected in transferring the packages to the concerned delivery partners.

4.     Our logistics partners guarantee a delivery of packages within 1-6 Working days to anywhere in India there can be delays as each shipping partner has their own method and transit hubs to each location hence the exact delivery time is not predictable therefore we request all our customers plan your orders allowing sufficient time for the delivery.

Making changes in order:

1.     For making changes in order, you can contact us via email or call within 2 hours from the time of placing order for making changes in following fields

1.     Product

2.     Quantity

3.     Address