CD 4514
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Hyper Delivery
    in Kochi
  • 99% Customers
    Feedbacks
  • 24x7
    Customer Service
  • Payment
    Secure System
  • Only Best
    Products

CD 4514

Available: In Stock
₹ 35.23
Image
  • Order within
Secure

CD 4514

The CD54HC4514, CD74HC4514, and CD74HC4515 are high-speed silicon gate devices consisting of a 4-bit strobed latch and a 4- to 16-line decoder. The selected output is enabled by a low on the enable input (E). A high on E inhibits selection of any output. Demultiplexing is accomplished by using the E input as the data input and the select inputs (A0- A3) as addresses. This E input also serves as a chip select when these devices are cascaded.

When Latch Enable (LE) is high the output follows changes in the inputs (see truth table). When LE is low the output is isolated from changes in the input and remains at the level (high for the 4514, low for the 4515) it had before the latches were enabled. These devices, enhanced versions of the equivalent CMOS types, can drive 10 LSTTL loads.

 

CD 4514 features

  •  Multifunction Capability
  •  Binary to 1-of-16 Decoder
  •  1-to-16 Line Demultiplexer
  •  Fanout (Over Temperature Range)
  •  Standard Outputs . . . 10 LSTTL Loads
  •  Bus Driver Outputs . . . 15 LSTTL Loads
  •  Wide Operating Temperature Range . . . -55C to 125C
  •  Balanced Propagation Delay and Transition Times
  •  Significant Power Reduction Compared to LSTTL Logic ICs
  •  HC Types
  •  2V to 6V Operation
  •  High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V

Developer:  CD 4514_datasheet

CD 4514

The CD54HC4514, CD74HC4514, and CD74HC4515 are high-speed silicon gate devices consisting of a 4-bit strobed latch and a 4- to 16-line decoder. The selected output is enabled by a low on the enable input (E). A high on E inhibits selection of any output. Demultiplexing is accomplished by using the E input as the data input and the select inputs (A0- A3) as addresses. This E input also serves as a chip select when these devices are cascaded.

When Latch Enable (LE) is high the output follows changes in the inputs (see truth table). When LE is low the output is isolated from changes in the input and remains at the level (high for the 4514, low for the 4515) it had before the latches were enabled. These devices, enhanced versions of the equivalent CMOS types, can drive 10 LSTTL loads.

 

CD 4514 features

  •  Multifunction Capability
  •  Binary to 1-of-16 Decoder
  •  1-to-16 Line Demultiplexer
  •  Fanout (Over Temperature Range)
  •  Standard Outputs . . . 10 LSTTL Loads
  •  Bus Driver Outputs . . . 15 LSTTL Loads
  •  Wide Operating Temperature Range . . . -55C to 125C
  •  Balanced Propagation Delay and Transition Times
  •  Significant Power Reduction Compared to LSTTL Logic ICs
  •  HC Types
  •  2V to 6V Operation
  •  High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V

Developer:  CD 4514_datasheet

We will arrange for shipment of the products to you. Shipping schedules are estimates only and cannot be guaranteed. We are not liable for any delays in the shipments. Title and risk of loss and damages pass on to you upon the products delivery to you. In case reverse shipment cannot be arranged by us due to unavailability of our logistics partners, then in that case you may be requested to send such products through any available courier services.