BMP 180 Pressure Sensor Module Arduino
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Hyper Delivery
    in Kochi
  • 99% Customers
    Feedbacks
  • 24x7
    Customer Service
  • Payment
    Secure System
  • Only Best
    Products

BMP 180 Pressure Sensor Module Arduino

Available: In Stock
₹ 112.10 ₹ 299.00
Image
  • Order within
Secure

DESCRIPTION

BMP180 Sensor is an extremely precise low cost sensor from Bosch for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins. It is completely identical to the BMP085 in terms of firmware/software. BMP 180 Pressure Sensor Module Arduino available at Tomson Electronics, Kochi, Kerala, India is the best quality product

This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on piezo-resistive technology for high accuracy, ruggedness and long term stability.

DEVELOPMENT SOURCES 

Click Here to download the BMP Library and example code for Arduino

FEATURES

  • 1.8V to 3.6V Supply Voltage
  • Low power consumption - 0.5uA at 1Hz
  • I2C interface
  • Max I2C Speed: 3.5Mhz
  • Very low noise - up to 0.02hPa (17cm)
  • Full calibrated
  • Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
  • Size: 13mm x 10mm

APPLICATIONS

  • Temperature, pressure and altitude measurements using BMP180

ALSO SERCHED AS:

BMP 180 Pressure Sensor Module Arduino

DESCRIPTION

BMP180 Sensor is an extremely precise low cost sensor from Bosch for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter! The sensor is soldered onto a PCB with a 3.3V regulator, I2C level shifter and pull-up resistors on the I2C pins. It is completely identical to the BMP085 in terms of firmware/software. BMP 180 Pressure Sensor Module Arduino available at Tomson Electronics, Kochi, Kerala, India is the best quality product

This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on piezo-resistive technology for high accuracy, ruggedness and long term stability.

DEVELOPMENT SOURCES 

Click Here to download the BMP Library and example code for Arduino

FEATURES

  • 1.8V to 3.6V Supply Voltage
  • Low power consumption - 0.5uA at 1Hz
  • I2C interface
  • Max I2C Speed: 3.5Mhz
  • Very low noise - up to 0.02hPa (17cm)
  • Full calibrated
  • Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
  • Size: 13mm x 10mm

APPLICATIONS

  • Temperature, pressure and altitude measurements using BMP180

ALSO SERCHED AS:

BMP 180 Pressure Sensor Module Arduino

We will arrange for shipment of the products to you. Shipping schedules are estimates only and cannot be guaranteed. We are not liable for any delays in the shipments. Title and risk of loss and damages pass on to you upon the products delivery to you. In case reverse shipment cannot be arranged by us due to unavailability of our logistics partners, then in that case you may be requested to send such products through any available courier services.