4 Digit I2C 7 Segment Display Module
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Hyper Delivery
    in Kochi
  • 99% Customers
    Feedbacks
  • 24x7
    Customer Service
  • Payment
    Secure System
  • Only Best
    Products

4 Digit I2C 7 Segment Display Module

Available: In Stock
₹ 70.80 ₹ 75.20
Image
  • Order within
Secure

Specification

This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Display Module. Also thanks to the I2C Bus you can control it using only 2 wires, leaving more pins available on your MicroController to connect other things.

The module is a 12-foot clock with four common anode tube (0.36 inch) display module for driver IC TM1637, only two signal lines can make the MCU control four 7-segment digital tubes.

There are several modules using this TM1637 chip to form a 4 digit numerical display module. TM1637 has also keyboard input capability but is not used in this module.

LED Display module to Arduino

GND    –    GND
Vcc       –     5V
DIO     –      D2
CLK     –     D3

Features :

  1. Ease to use.
  2. Ease of multiplexing.
  3. Can use as a 4 digit display unit.
  4. Can use as a clock display.
  5. DIY clock project.
  6. 4 digit display unit.
  7. Electrical/Electronic projects.
  8. The counter project using 7 segment display.
  9. 4 M2 screws positioning holes for easy installation

 

Specification

This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Display Module. Also thanks to the I2C Bus you can control it using only 2 wires, leaving more pins available on your MicroController to connect other things.

The module is a 12-foot clock with four common anode tube (0.36 inch) display module for driver IC TM1637, only two signal lines can make the MCU control four 7-segment digital tubes.

There are several modules using this TM1637 chip to form a 4 digit numerical display module. TM1637 has also keyboard input capability but is not used in this module.

LED Display module to Arduino

GND    –    GND
Vcc       –     5V
DIO     –      D2
CLK     –     D3

Features :

  1. Ease to use.
  2. Ease of multiplexing.
  3. Can use as a 4 digit display unit.
  4. Can use as a clock display.
  5. DIY clock project.
  6. 4 digit display unit.
  7. Electrical/Electronic projects.
  8. The counter project using 7 segment display.
  9. 4 M2 screws positioning holes for easy installation

 

We will arrange for shipment of the products to you. Shipping schedules are estimates only and cannot be guaranteed. We are not liable for any delays in the shipments. Title and risk of loss and damages pass on to you upon the products delivery to you. In case reverse shipment cannot be arranged by us due to unavailability of our logistics partners, then in that case you may be requested to send such products through any available courier services.