{"title":"FLIGHT CONTROL BOARD","description":"\u003ch1 id=\"what-is-fc\"\u003eWhat is a Quadcopter Fight Controller\u003c\/h1\u003e\n\u003cp\u003eA flight controller (a.k.a FC) is the brain of the aircraft. It’s basically a circuit board with sensors that detect orientation changes of your drone. It also receives user commands and controls the motors in order to keep the quadcopter in the air.\u003c\/p\u003e\n\u003cp\u003eNearly all flight controllers have basic sensors such as Gyro (Gyroscopes) and Acc (Accelerometer). Some FC might include more advanced sensors such as Barometer (barometric pressure sensors) and magnetometer (compass).\u003c\/p\u003e\n\u003cp\u003eThe flight controller is also a hub for many other peripherals, such as GPS, LED, Sonar sensor etc.\u003c\/p\u003e\n\u003cp\u003eRacing drone flight controllers are rapidly evolving: smaller, using better processors and hardware and getting more and more features integrated.\u003c\/p\u003e","products":[{"product_id":"k-k-2-1-kopter-flight-control-board","title":"K K 2.1.5 Kopter Flight Control Board","description":"\u003cp\u003eThe original KK gyro system has been updated to the incredibly sensitive 6050 MPU system making this the most stable KK board ever and adds the addition of an auto-level function. At the heart of the KK2.1 is the ATMEL Mega 644PA 8-bit AVR RISC-based microcontroller with 64k of memory.\u003c\/p\u003e\n\u003cp\u003eAn additional header has been added for voltage detection, so now there is no need for on-board soldering. A handy piezo buzzer is also included with the board for audio warning when activating and deactivating the board, which can be supplemented with an LED for visual signaling.\u003c\/p\u003e\n\u003cp\u003eA host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout\/propeller direction, calibrate your ESCs and radio and you're ready to go! All of which is done with easy to follow on screen prompts!\u003c\/p\u003e\n\u003cp\u003eIf you're new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMost stable KK Board ever.\u003c\/li\u003e\n\u003cli\u003e6050 MPU system based.\u003c\/li\u003e\n\u003cli\u003eEasy graphical interfacing with receiver.\u003c\/li\u003e\n\u003cli\u003eIn Built firmware.\u003c\/li\u003e\n\u003cli\u003eEasy to use for beginners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eALSO SEARCHED AS:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cem\u003e\u003cstrong\u003eK K 2.1.5 Kopter Flight Control Board\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"TOMSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":46486128019,"sku":"DRN-02493","price":4069.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/FC-KK2.1.5.jpg?v=1630396947"},{"product_id":"apm-2-8-flight-controller","title":"APM 2.8 Flight Controller","description":"\u003ch3\u003e\u003cstrong\u003eDESCRIPTION \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eAPM 2.8 Multicopter Flight Controller 2.5 2.6 Upgraded Built-in Compass for FPV RC Drone Aircraft is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller, however, this has the option to use the built-in compass, or external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.\u003c\/p\u003e\n\u003cp\u003eThe APM 2.8 Multicopter Flight Controller is a complete open source autopilot system and the bestselling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints.\u003c\/p\u003e\nThis revision of the board has an optional onboard compass, which is designed for vehicles (especially multi-copters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference. (On fixed wing aircraft it’s often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference, so this is not as critical, but APM 2.8 gives more flexibility in that positioning and is a good choice for them, too). This is designed to be used with our \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/www.tomsonelectronics.com\/products\/ublox-neo-7m-gps-with-compass-for-apm\" target=\"_blank\" title=\"GPS\" rel=\"noopener noreferrer\" style=\"color: #000000; text-decoration: underline;\"\u003eGPS\/Compass\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e combo so that the GPS\/Compass unit can be mounted further from noise sources than APM itself.\n\u003cp\u003eAPM 2.8 Multicopter Flight Controller requires a GPS unit for full autonomy. You can add additional extras to your APM 2.8 board via the options above.\u003c\/p\u003e\n\u003cp\u003eNote: This is a clone product with the same functionality as the original.\u003c\/p\u003e\n\u003ch3\u003eFEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePin: straight.\u003c\/li\u003e\n\u003cli\u003ePower supply: LP2985-3.3.\u003c\/li\u003e\n\u003cli\u003eMax voltage: 16V.\u003c\/li\u003e\n\u003cli\u003eDimensions: 85 x 45 x 15 mm(LxWxH)\u003c\/li\u003e\n\u003cli\u003eWeight: 82gm\u003c\/li\u003e\n\u003cli\u003eAdd a 47uF tantalum capacitor.\u003c\/li\u003e\n\u003cli\u003ePort: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).\u003c\/li\u003e\n\u003cli\u003eArduino Compatible!\u003c\/li\u003e\n\u003cli\u003eIncludes 3-axis gyro, accelerometer, along with a high-performance barometer\u003c\/li\u003e\n\u003cli\u003eOnboard 4 MegaByte Dataflash chip for automatic data logging.\u003c\/li\u003e\n\u003cli\u003eOptional off-board GPS, a uBlox LEA-6H module with Compass.\u003c\/li\u003e\n\u003cli\u003eOne of the first open source autopilot systems to use Invensense’s 6 DoF Accelerometer\/Gyro MPU-6000.\u003c\/li\u003e\n\u003cli\u003eBarometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.\u003c\/li\u003e\n\u003cli\u003eAtmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.\u003c\/li\u003e\n\u003cli\u003ePoint-and-click waypoint entry, using Google Maps.\u003c\/li\u003e\n\u003cli\u003eSelect mission commands from drop-down menus.\u003c\/li\u003e\n\u003cli\u003eDownload mission logs files and analyzes them.\u003c\/li\u003e\n\u003cli\u003eConfigure APM settings for your airframe.\u003c\/li\u003e\n\u003cli\u003eInterface with a PC flight simulator to create a full hardware-in-the-loop UAV simulator.\u003c\/li\u003e\n\u003cli\u003eSee the output from APM’s serial terminal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eDEVELOPMENT SOURCES\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003ca href=\"http:\/\/ardupilot.org\/planner\/\" target=\"_blank\" title=\"mission planner\" rel=\"noopener noreferrer\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eMission Planner Wiki\u003c\/span\u003e \u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eALSO SEARCHED AS:\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cem\u003e\u003cstrong\u003eAPM 2.8 Flight Controller\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cgdiv\u003e\u003c\/gdiv\u003e","brand":"-","offers":[{"title":"Default Title","offer_id":8788953858139,"sku":"DRN-02491","price":6499.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/APM.png?v=1555048161"},{"product_id":"pixhawk-px4-autopilot-pix-2-4-8-32-bit-flight-controller","title":"Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller","description":"\u003ch3\u003e\u003cstrong\u003eDESCRIPTION\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe benefits of the Pixhawk system include integrated multithreading, a Unix\/Linux-like programming environment, completely new autopilot functions such as sophisticated scripting of missions and flight behaviour, and a custom PX4 driver layer ensuring tight timing across all processes. These advanced capabilities ensure that there are no limitations to your autonomous vehicle. Pixhawk allows existing APM and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users to participate in the exciting world of autonomous vehicles.\u003cbr\u003e \u003cbr\u003eThe flagship Pixhawk module will be accompanied by new peripheral options, including a digital airspeed sensor, support for an external multi-colour LED indicator and an external magnetometer. All peripherals are automatically detected and configured.\u003cbr\u003e \u003cbr\u003eThis package includes all essential parts required to make your multirotor, plane or rover working and controllable through autopilot. Other accessories like telemetry, external LED, and I2C splitter can be bought later on.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINCLUDES:\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e \u003cbr\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePixhawk autopilot\u003c\/li\u003e\n\u003cli\u003eBuzzer\u003c\/li\u003e\n\u003cli\u003eSafety switch button\u003c\/li\u003e\n\u003cli\u003ePPM Encoder\u003c\/li\u003e\n\u003cli\u003eSD card and adapter\u003c\/li\u003e\n\u003cli\u003eI2C splitter module with cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdvanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS\u003c\/li\u003e\n\u003cli\u003e14 PWM\/servo outputs (8 with failsafe and manual override, 6 auxiliaries, high-power compatible)\u003c\/li\u003e\n\u003cli\u003eAbundant connectivity options for additional peripherals (UART, I2C, CAN)\u003c\/li\u003e\n\u003cli\u003eIntegrated backup system for in-flight recovery and manual override with a dedicated processor and stand-alone power supply\u003c\/li\u003e\n\u003cli\u003eThe backup system integrates mixing, providing consistent autopilot and manual override mixing modes\u003c\/li\u003e\n\u003cli\u003eRedundant power supply inputs and automatic failover\u003c\/li\u003e\n\u003cli\u003eExternal safety button for easy motor activation\u003c\/li\u003e\n\u003cli\u003eMulticolor LED indicator\u003c\/li\u003e\n\u003cli\u003eHigh-power, multi-tone piezo audio indicator\u003c\/li\u003e\n\u003cli\u003emicroSD card for long-time high-rate logging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eMicroprocessor:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e32-bit STM32F427 Cortex M4 core with FPU\u003c\/li\u003e\n\u003cli\u003e168 MHz\/256 KB RAM\/2 MB Flash\u003c\/li\u003e\n\u003cli\u003eThe 32-bit STM32F103 failsafe co-processor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSensors:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eST Micro L3GD20 3-axis 16-bit gyroscope\u003c\/li\u003e\n\u003cli\u003eST Micro LSM303D 3-axis 14-bit accelerometer \/ magnetometer\u003c\/li\u003e\n\u003cli\u003eInvensense MPU 6000 3-axis accelerometer\/gyroscope\u003c\/li\u003e\n\u003cli\u003eMEAS MS5611 barometer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInterfaces:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5x UART (serial ports), one high-power capable, 2x with HW flow control\u003c\/li\u003e\n\u003cli\u003e2x CAN\u003c\/li\u003e\n\u003cli\u003eSpektrum DSM \/ DSM2 \/ DSM-X® Satellite compatible input up to DX8 (DX9 and above not supported)\u003c\/li\u003e\n\u003cli\u003eFutaba S.BUS® compatible input and output\u003c\/li\u003e\n\u003cli\u003ePPM sum signal\u003c\/li\u003e\n\u003cli\u003eRSSI (PWM or voltage) input\u003c\/li\u003e\n\u003cli\u003eI2C®\u003c\/li\u003e\n\u003cli\u003eSPI\u003c\/li\u003e\n\u003cli\u003e3.3 and 6.6V ADC inputs\u003c\/li\u003e\n\u003cli\u003eExternal micro USB port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower System:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal diode controller with automatic failover\u003c\/li\u003e\n\u003cli\u003eServo rail high-power (7 V) and high-current ready\u003c\/li\u003e\n\u003cli\u003eAll peripheral outputs over-current protected, all inputs ESD protected\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDIMENSIONS:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 38g (1.31oz)\u003c\/li\u003e\n\u003cli\u003eWidth: 50mm (1.96\")\u003c\/li\u003e\n\u003cli\u003eThickness: 15.5mm (.613\")\u003c\/li\u003e\n\u003cli\u003eLength: 81.5mm (3.21\")\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cstrong\u003eALSO SEARCHED AS:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003ePixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller, PIXHAWK\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"TOMSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":8789403959387,"sku":"DRN-26143","price":10796.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/PXHAWK_2_1.png?v=1554446429"},{"product_id":"dys-f4-pro-v2-flight-controller-aio-osd-5v-9v-3-3v-bec-current-sensor","title":"DYS F4 Pro V2 Flight Controller AIO OSD \u0026 5V 9V 3.3V BEC \u0026 Current Sensor","description":"\u003ch2\u003e\u003cstrong\u003eDYS Omnibus F4 Pro V2 Flight Controller AIO OSD \u0026amp; BEC \u0026amp; Current Sensor\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSpecification:\u003c\/strong\u003e\u003cbr\u003eBrand Name: DYS\u003cbr\u003eModel: F4 Pro V2\u003cbr\u003eItem Name: F4 Pro V2 FC AIO OSD BEC and Current Sensor\u003cbr\u003eMCU: STM32F405\u003cbr\u003e Gyro: MPU6000\u003cbr\u003eInput Voltage: Support 3-6S Lipo\u003cbr\u003eBEC Output: 5V@ 3A\u003cbr\u003e                    : 3.3V @ 0.3A \u003cbr\u003e- Also have 9V @ 1.2A\u003cbr\u003eSize: 38 (L)X386(W) mm\u003cbr\u003eHole Distance: 30.5x30.5mm\u003cbr\u003eNet Weight: 10.5g (not including cable)\u003cstrong\u003e\u003cspan\u003e\u003cbr\u003e\u003cbr\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e- The refresh rate of PID and gyro up to 8K\u003c\/div\u003e\n\u003cdiv\u003e- PCB 3OZ copper enhance current stability and cooling fast\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e- Exposed pad for easy soldering\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e-\u003cspan\u003e \u003c\/span\u003eSupport BF setting software to flash and debug OSD\u003cbr\u003e\u003cspan\u003e- Integrated current sensor to monitor the real-time power consumption \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e- Use remote control to view flight control parameter through OSD\u003c\/div\u003e\n\u003cdiv\u003e- Support SAMRT AUDIO, adjust the VTX by OSD\u003c\/div\u003e\n\u003cdiv\u003e- Comes with heat resistance damping ball to upgrade the stability and operation\u003c\/div\u003e\n\u003cdiv\u003e- 3-6s lipo input, integrated PDB, max withstand current 160A\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e\u003cspan\u003e\u003cstrong\u003eNew upgradable fucntion:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003cdiv\u003e1. It can use S5,S6 motor control signal pad after updating firmware\u003c\/div\u003e\n\u003cdiv\u003e2. Has the reverse high voltage protection circuit to the PCB board.\u003c\/div\u003e\n\u003cdiv\u003e3. Added 9V\/1.2A power output \u0026amp; 5V\/3A one-way output\u003c\/div\u003e\n\u003cdiv\u003e4. With 8pin socket to compatible with 4 in 1 ESC\u003c\/div\u003e\n\u003cdiv\u003e5. Added Protection Circuit for USB Port\u003c\/div\u003e\n\u003cdiv\u003e7. Added 8 Pin Port for 4 In 1 ESC\u003c\/div\u003e\n\u003cdiv\u003e8. Compatible with DYS 20A \/ 30A 4 In 1 ESC.\u003c\/div\u003e\n\u003cbr\u003e\u003cstrong\u003ePackage Included:\u003c\/strong\u003e\u003cbr\u003e1x DYS F4 Pro V2 Flight Controll Board\u003cbr\u003e3x Cable\u003cbr\u003e1x XT60 Connector\u003cbr\u003e1x Manual\u003cbr\u003e1x bag of Screws\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e","brand":"TOMSON ELECTRONICS","offers":[{"title":"Default Title","offer_id":23079201144880,"sku":"DRN-02502","price":3037.32,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/2e2ed62d-3d0c-457e-b167-b78f399be453_1.JPG?v=1556778760"},{"product_id":"dys-f4-mini-flight-controller","title":"DYS F4 Mini Flight Controller","description":"\u003ch1 style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\u003cstrong\u003eDYS MINI F4\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eDYS F4 mini Flight Control uses the OMNIBUS F4 firmware and can easily run at 8KHz. This AIO (all-in-one) flight controller has integrated OSD and Current Sensor. This single board is your F4 flight controller, your power distribution board, and OSD all in one package. The integrated current sensor can monitor the real-time power consumption and the OSD is fully configurable from the Betaflight GUI.\u003c\/p\u003e\n\u003ch4\u003eFeatures :\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eHigh performance F4 (STM32F405) Processor\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMPU 6000 gyro\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFirmware target: Omnibus F4\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3OZ copper PCB to carry all your amps!\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMax. Current: 80A\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e5V 2A BEC output \u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eConformal coated for the British weather with exposed pads for easy soldering\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with all ESCs, as well as DYS 4-in-1 ESC without soldering\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated OSD configured through the Betaflight Configurator\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIntegrated current meter to monitor the real-time power consumption\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjust the PIDs by OSD using your radio\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjust the VTX settings (IRC Tramp and TBS Unify)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2-4s Lipo support\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNet weight: 6g (excluding wire)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSize: L30 * W27mm.\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStandard 20*20mm mounting holes\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003e\u003c\/h1\u003e","brand":"DYS","offers":[{"title":"Default Title","offer_id":39630080737475,"sku":"DRN-02502","price":3528.2,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/products\/DYSF4MiniFlightControllerTomsonElectronics_1.jpg?v=1618899270"},{"product_id":"daspilot-plugfly-flight-controller","title":"DASPILOT PLUGFLY FLIGHT CONTROLLER","description":"\u003ch5\u003eDescription\u003c\/h5\u003e \u003cp\u003eThe \u003cstrong\u003eDASPILOT PLUGFLY FLIGHT CONTROLLER\u003c\/strong\u003e is a beginner-friendly, plug-and-play flight controller designed for quadcopter drones, making drone building and flying accessible to makers, hobbyists, and new pilots. Featuring highly tuned IMU filters, optimized PID values, and seamless integration, Plugfly eliminates complex wiring and tuning for stable, crash-resistant flights. Perfect for DIY drone projects, racing quads, and learning multirotor control with minimal setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePeople also search for:\u003c\/strong\u003e plug and play drone flight controller, daspilot plugfly, beginner quadcopter fc, easy tune flight controller, stable pid drone board.\u003c\/p\u003e \u003ch5\u003eSpecifications\u003c\/h5\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eController:\u003c\/strong\u003e Advanced STM32 Microcontroller with IMU\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eConnectivity:\u003c\/strong\u003e PPM Receiver Input, BEC for ESC Power\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003ePower Source:\u003c\/strong\u003e 5V BEC from ESC (Battery via ESC)\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProgramming Support:\u003c\/strong\u003e Betaflight Configurator Compatible\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eFlight Mode:\u003c\/strong\u003e Stabilized, Acro, Pre-tuned PID for Multiple Frames\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eForm Factor:\u003c\/strong\u003e Compact Plug-and-Play Quadcopter Board\u003c\/li\u003e \u003c\/ul\u003e \u003ch5\u003eApplications\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eBeginner drone building and racing quads\u003c\/li\u003e \u003cli\u003eDIY multirotor prototyping\u003c\/li\u003e \u003cli\u003eStable flight training for hobbyists\u003c\/li\u003e \u003cli\u003eFPV and freestyle drone setups\u003c\/li\u003e \u003cli\u003eEmbedded drone experimentation\u003c\/li\u003e \u003c\/ul\u003e \u003ch5\u003eUsage Notes\u003c\/h5\u003e \u003cul\u003e \u003cli\u003eEnsure ESCs have BEC for flight controller power.\u003c\/li\u003e \u003cli\u003eConnect PPM from receiver and motors to labeled channels 1-4.\u003c\/li\u003e \u003cli\u003ePerform radio, ESC, and accelerometer calibration before first flight.\u003c\/li\u003e \u003c\/ul\u003e \u003ch5\u003ePackage Includes\u003c\/h5\u003e \u003cul\u003e \u003cli\u003e1 × DASPILOT PLUGFLY Flight Controller\u003cbr\u003e \u003c\/li\u003e \u003cli\u003ePre-tuned Firmware\u003c\/li\u003e \u003cli\u003eQuick Start Guide with Calibration Instructions\u003c\/li\u003e \u003c\/ul\u003e \u003ch5\u003eFAQ\u003c\/h5\u003e \u003cp\u003e\u003cstrong\u003eQ: What makes the DASPILOT Plugfly different from traditional flight controllers?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Unlike standard FCs requiring extensive tuning, Plugfly features \u003cstrong\u003epre-optimized PID values and advanced IMU filters\u003c\/strong\u003e for multiple frame sizes, offering plug-and-play stability without Betaflight adjustments. It supports PPM receivers for simple wiring and delivers smooth control for beginners.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Is the Plugfly ready to fly out of the box?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, it's a \u003cstrong\u003etrue plug-and-play controller\u003c\/strong\u003e—connect motors to channels 1-4, PPM receiver, and power via ESC BEC. Basic calibration (radio\/ESC\/accel) takes minutes, no soldering or complex config needed.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: What drone sizes does Plugfly support?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Optimized for \u003cstrong\u003esmall to medium quads like 450-size frames\u003c\/strong\u003e, with tuned PIDs for various motors and ESCs. Versatile for racing, freestyle, or camera drones.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: How do I calibrate the controller?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Power on, use R button for radio calibration (throttle down, sticks center), E button for ESC sync, and follow LED indicators (blue\/green for success). Reboot between steps for quick setup.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Can I use it with any receiver or ESC?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Yes, supports \u003cstrong\u003eany PPM-output receiver\u003c\/strong\u003e and BLHeli ESCs with BEC (signal wire to the right). Motors connect directly to numbered pads.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eQ: Where can I find tutorials and guides?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Check Daspilot.com for wiring videos, calibration guides, and Betaflight flashing. Includes drone build examples and troubleshooting for Indian hobbyists.\u003c\/p\u003e","brand":"DASPILOT","offers":[{"title":"Default Title","offer_id":47787544740078,"sku":"DRN-28745","price":3999.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/files\/DASPILOTPLUGFLYFLIGHTCONTROLLERcompressed.png?v=1773817438"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2132\/9029\/collections\/Flight_Control_Board_Tomson_Electronics.jpg?v=1634202172","url":"https:\/\/www.tomsonelectronics.com\/collections\/flight-control-board\/robotics.oembed","provider":"Tomson Electronics ","version":"1.0","type":"link"}