Arduino Uno + Cable
The Arduino UNO is a widely used open-source microcontroller board based on the Atmega 328P microcontroller and developed by Arduino.cc. The board is equipped with sets of digital and analog input/output (I/O) pins that may be interfaced to various expansion boards (shields) and other circuits. The board features 14 Digital pins and 6 Analog pins. It is programmable with the Arduino IDE(Integrated Development Environment) via a type B USB cable.It can be powered by a USB cable or by an external 9 volt battery, though it accepts voltages between 7 and 20 volts. It is also similar to the Arduino Nano and Leonardo.
The Arduino Uno is a microcontroller board based on the ATmega328. Arduino Uno has 14 digital input/out put pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.Arduino Uno available at Tomson Electronics, Kochi, Kerala, India is the best quality product.
The Uno board is the first in a series of USB Arduino boards, and the reference model for the Arduino platform.The ATmega328 on the Arduino Uno comes preprogrammed with a bootloader that allows to upload new code to it without the use of an external hardware programmer.It communicates using the original STK500 protocol. The Uno also differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) programmed as a USB-to-serial converter. The Arduino UNO is generally considered the most user-friendly and popular board or the Arduino board series,with boards being sold worldwide for less price.
Note: This is a clone product with the CH34x USB to TTL IC
- Microcontroller : ATmega328P
- Operating Voltage : 5V
- Input Voltage (recommended) : 5V
- Input Voltage (limits) : 6-20V
- Digital I/O Pins : 14 (of which 6 provide PWM output)
- Analog Input Pins : 6
- DC Current per I/O Pin : 40mAh
- DC Current for 3.3V Pin : 50mAh
- Flash Memory : 32 KB (ATmega328) of which 0.5 KB used by bootloader
- SRAM : 2 KB (ATmega328)
- EEPROM : 1 KB (ATmega328)
- Clock Speed : 16 MHz
ALSO SEARCHED AS:
arduino uno,arduino uno price in india,arduino uno online.
We Also Recommend
Arduino Uno Rev 3 Original